- document
-
Morete Barbosa Bertolo, V. (author)The use of materials in increasingly severe service conditions raises concerns about structural safety with respect to cleavage fracture. There are three main material-related challenges that structures face under harsh environments: 1) the trade-off between strength and toughness; 2) the ductile-to-brittle transition behaviour of BCC high...doctoral thesis 2023
- document
-
Atreya, V. (author)Dual-phase (DP) steels are an important class of advanced high-strength steels (AHSS) and constitute a major share of steels for the automotive industry. A microstructure consisting of hard martensite embedded in a soft ferritic matrix gives them a good combination of strength and ductility. The martensite formation in the microstructure from...doctoral thesis 2023
- document
-
Li, Zhen (author), Chen, Zhiyuan (author), Law, Man-Kay (author), Du, S. (author), Cheng, Xu (author), Zeng, Xiaoyang (author), Han, Jun (author)With the advent of the lnternet-of-Things (1oT) era, sensor nodes are required in almost all fields to achieve a better interaction between humans and the environment. Piezoelectric energy harvester (PEH), which exhibits an equivalent electrical model of an AC current source /P in parallel with the inherent capacitor CP, is a promising...conference paper 2023
- document
-
Zhang, S. (author)Alkali-activated Materials (AAMs), including those classified as geopolymer, are obtained through the reaction between a solid precursor and an alkaline solution. Compared with ordinary Portland cement (OPC) binders, these materials maintain comparable mechanical properties but have the advantage of reducing greenhouse gas emissions and...doctoral thesis 2022
- document
-
Jol, Mark (author)Asphalt concrete is the most used material in road construction. Analysing the behaviour and properties of this material is vital for modern day society. Currently, this is mostly done in labs using actual asphalt mixtures. However, this is a very expensive and time consuming process. An upcoming alternative approach is the use of computational...master thesis 2022
- document
-
Bharath, Anirudh (author)This work develops a stand-alone Finite Element-based Unit Cell for the modelling of Fibre Reinforced Composites, capable of capturing 3D stress states and geometrical imperfections at the micro-scale. The project considers different beam and 3D elements for this purpose and draws comparisons between them based on computational efficiency,...master thesis 2022
- document
-
Zhang, H. (author)With the attempt to reduce traffic noise, porous asphalt (PA) mixture is widely used as a wearing course on the highways in the Netherlands. However, due to the open structure, PA mix pavement easily suffers from the loss of individual aggregates from its surface, which is named as ravelling. After the initial ravelling, the damage can rapidly...doctoral thesis 2022
- document
-
Celada-Casero, Carola (author), Vercruysse, Florian (author), Linke, Bernd (author), Smith, Ali (author), Kok, Piet (author), Sietsma, J. (author), Santofimia, Maria Jesus (author)Quenching & Partitioning (Q&P) steels owe their good strength-ductility combinations to the martensite/austenite (α’/γ) mechanical interactions and to the formation of mechanically-induced martensite (α′<sub>mech</sub>) through the transformation-induced plasticity (TRIP) effect. An essential role is played by carbon, whose...journal article 2022
- document
-
Atreya, V. (author), van Dokkum, J.S. (author), Bos, C. (author), Santofimia, Maria Jesus (author)The volume increase and shape change during austenite to martensite transformation in dual-phase (DP) steels are largely accommodated in the microstructure by the deformation of the surrounding ferrite matrix. Accurate estimation of transformation-induced deformation of ferrite via experiments and modeling is essential for predicting the...journal article 2022
- document
-
Zhou, Y. (author), Sluys, Lambertus J. (author), Esposito, R. (author)Accurate assessment of the overall mechanical behavior of masonry, composed of bricks and mortar joints, remains challenging due to its inhomogeneous and orthotropic nature. In this study, the feasibility of various mean-field homogenization schemes for the three-dimensional orthotropic elastic properties of masonry is comprehensively...journal article 2022
- document
-
Baar, Simon (author), Pavlov, Leonid (author), Kassapoglou, C. (author)Onset Theory (previously known as Strain Invariant Failure Theory) is a physics-based composite failure criterion attempting to predict failure at the level of constituents rather than for a homogenized ply. Applying Onset Theory correctly requires a number of steps. As a starting point for other researchers, a consistent approach is...journal article 2022
- document
-
Wang, Xinyue (author), Dong, Sufen (author), Li, Z. (author), Han, Baoguo (author), Ou, Jinping (author)This study investigates the effects of nanofillers on the interfacial transition zone (ITZ) between aggregate and cement paste by using nanoindentation and statistical nanoindentation techniques. Moreover, the underlying mechanisms are revealed through micromechanical modeling. The nanoindentation results indicate that incorporating...journal article 2022
- document
-
Wang, M. (author), Ge, Daohan (author), Zhang, Liqiang (author), Herder, J.L. (author)Compliant micromechanisms (CMMs) acquire mobility from the deflection of elastic members and have been proven to be robust by millions of silicon MEMS devices. However, the limited deflection of silicon impedes the realization of more sophisticated CMMs, which often require larger deflections. Recently, some novel manufacturing processes have...review 2021
- document
-
Al Khateeb, Loay (author), Anupam, K. (author), Erkens, S. (author), Scarpas, Athanasios (author)The paper aims to simulate the micromechanical behavior of asphalt mixtures during the compaction process using the Discrete Element Method (DEM). The interactions between the components of a Porous Asphalt (PA) mixture were represented using an Elastic Viscoelastic Contact Model (EVCM), which is a user-defined model implemented in EDEM...journal article 2021
- document
-
Wang, H. (author), Zhang, H. (author), Liu, X. (author), Scarpas, Athanasios (author), Leng, Zhen (author)Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. The current study aims to further improve the prediction accuracy of micromechanical models for CRMB by considering the interparticle interactions. To accomplish this goal, two different...journal article 2021
- document
-
Hussein, A.H.A. (author), Krom, Alfons H.M. (author), Dey, P. (author), Sunnardianto, G.K. (author), Moultos, O. (author), Walters, C.L. (author)In this study, we investigate the effect of the heterogeneous micromechanical stress fields resulting from the grain-scale anisotropy on the redistribution of hydrogen using a diffusion coupled crystal plasticity model. A representative volume element with periodic boundary conditions was used to model a synthetic microstructure. The effect...journal article 2021
- document
-
Zhang, H. (author), Anupam, K. (author), Scarpas, Athanasios (author), Kasbergen, C. (author), Erkens, S. (author)Asphalt mixtures with high porosities (known as porous asphalt (PA) mixes) are becoming a popular choice among road authorities as it provides better skid resistance while also reducing tire-pavement noises. Towards the design and manufacture of PA mix pavement, the evaluation of the mechanical properties of PA mixes is of great importance....journal article 2021
- document
-
Shakil, S. I. (author), Hadadzadeh, A. (author), Shalchi Amirkhiz, B. (author), Pirgazi, H. (author), Mohammadi, M. (author), Haghshenas, M. (author)This study aims at assessing the effect of solution heat treatment (at a temperature just below the eutectic temperature) followed by various cooling rates on the microstructure and mechanical properties of additively manufactured AlSi10Mg and the cast counterpart. The mechanical properties were evaluated using a depth-sensing nanoindentation...journal article 2021
- document
-
Wang, H. (author), Liu, X. (author), Zhang, H. (author), Apostolidis, P. (author), Erkens, S. (author), Scarpas, Athanasios (author)Crumb rubber modified bitumen (CRMB) can be considered as a binary composite system where rubber particles are embedded in the bitumen matrix. The bitumen-rubber interaction process (mainly swelling) significantly changes the mechanical properties of both bitumen and rubber phases. This study aims to predict the complex moduli of CRMB binders...journal article 2020
- document
-
Šavija, B. (author), Zhang, H. (author), Schlangen, E. (author)This work aims to understand deformation and fracture processes in blast furnace slag cement pastes made using CEM III/B which is commonly used in the Dutch infrastructure sector. First, based on our previous work on Portland cement pastes, a micromechanical model utilizing nanoindentation and X-ray computed tomography (CT) for input is...journal article 2020