Searched for: subject%3A%22Monopiles%22
(1 - 20 of 116)

Pages

document
van Doormaal, Thijn (author)
The demand for offshore wind energy has never been higher, yet the number of ideal areas for wind farm installations is decreasing. As a result, larger wind turbines are being placed in deeper waters, which poses opportunities for floating foundations. However, due to the industry's inability to scale up the production of relatively expensive...
master thesis 2023
document
de Moel, Geer (author)
Due to the rapidly growing offshore wind market, there is a high demand for capable wind turbine installation vessels. Current wind turbine installation vessels struggle with the installation of large diameter monopiles due to a lack of crane capacity and with the installation of wind turbine components at hub height due to a lack of crane...
master thesis 2023
document
Bosma, Marten (author)
Heerema Marine Contractors is assigned to execute the installation of 64 monopiles for the He Dreiht Offshore Wind Farm provided by Energie Baden-Württemberg (EnBW). The installation of the monopiles is done by means of a template structure. This template is specifically designed for this project and is installed on the seabed temporarily. The...
master thesis 2023
document
Kementzetzidis, E. (author)
At the end of 2019, the European Union (EU) put forward the European Green Deal to facilitate the technological progress necessary to achieve CO2-neutrality by 2050. Such a monumental achievement would require massive investments in infrastructure for the harvesting, storage and the transnational transportation of green energy. To date, the more...
doctoral thesis 2023
document
Hammer, T.C. (author), Willems, Tom (author), Hendrikse, H. (author)
For offshore wind farms which are planned in sub-arctic regions like the Baltic Sea and Bohai Bay, support structure design has to account for load effects from dynamic ice-structure interaction. There is relatively high uncertainty related to dynamic ice loads as little to no load- and response data of offshore wind turbines exposed to...
journal article 2023
document
Panagoulias, S. (author), de Winter, C.M.A. (author), Navalkar, S.T. (author), Nernheim, A. (author)
The expansion of the offshore wind industry in areas with high seismicity has led to engineering challenges related to the design of the offshore wind turbines (OWTs). Monopiles, i.e., tubular steel piles of large outer diameter, low aspect ratio (penetration depth over outer diameter), and relatively thin pile wall, are traditionally the...
journal article 2023
document
Tsetas, A. (author), Tsouvalas, A. (author), Sánchez Gómez, S. (author), Pisano, F. (author), Kementzetzidis, Evangelos (author), Molenkamp, T. (author), Elkadi, A.S.K. (author), Metrikine, A. (author)
Gentle Driving of Piles (GDP) is a new technology for the vibratory installation of tubular (mono)piles. Its founding principle is that both efficient installation and low noise emission can be achieved by applying to the pile a combination of axial and torsional vibrations. Preliminary development and demonstration of the proposed technology...
journal article 2023
document
Castellino, Francesco (author)
One of the main cost drivers of an offshore wind power plant are the support structures of the wind turbines, it is therefore of primary importance to optimize their design. Among the support structures available, the concept most widely adopted is the monopile-based support structure, whose design is often fatigue-driven. Offshore structures...
master thesis 2022
document
Bouwmeester, Boudewijn (author)
The increasing global demand of renewable and clean energy has led to the exponential growth, development, and interest in the offshore wind energy industry and expansion towards earthquake-prone areas. Offshore wind turbine structures, typically supported by a tubular monopile foundation, are increasing in size to meet the increasing human...
master thesis 2022
document
Meijer, Diederik (author)
The offshore wind sector in Europe has grown significantly over the past 20 years. Following this surge in number of installations, the first generation of turbines is reaching its end-of-life (EOL) phase and thought needs to be put into end-of-life strategies. As the market for lifetime extension is still in its infancy and...
master thesis 2022
document
Delavinia, Dimitra (author)
New offshore wind farms consisting of monopile-founded Offshore Wind Turbines (OWTs) are to be built in earthquake-prone areas. To design the monopile foundation and to accurately define the dynamic response of an OWT, the soil-monopile-superstructure interaction should be modelled properly. Due to the fact that the Three-Dimensional (3D) Finite...
master thesis 2022
document
van der Stap, Florian (author)
The increasing popularity of offshore wind as a result of the demand for renewable energy, forces the industry to consider the development of wind farms in sub-arctic areas. One of these areas is the Baltic Sea, where the potential for wind energy is very large, but which is also prone to the occurrence of ice. For the design of offshore...
master thesis 2022
document
Star, Quinten (author)
Perforated monopiles show promise in providing a better alternative to the commonly used jacket-like substructures used in intermediate water depths in the range of 30 to 120 m. By introducing perforations near the vicinity of the splash zone the wave loads on the monopile can be mitigated and the fatigue damage reduced, which is the main...
master thesis 2022
document
Rosenboom, Bas (author)
As the world economy and population grow, energy consumption grows too at a never before seen pace. Reducing costs and increased environmental awareness resulted in renewable energy sources being the fastest-growing sources in the last decade. Due to its high potential, many offshore wind turbines will be installed in the coming years. These...
master thesis 2022
document
Mikail, Davey (author)
The increasing demand for renewable energy sources, to achieve ‘green goals’ such as the Paris agreement, and their related projects, are becoming increasingly challenging to accomplish. Nowadays, offshore wind farm projects move into deeper waters and require larger individual Offshore Wind Turbines<br/>(OWT’s), which results in larger...
master thesis 2022
document
Hageman, Evelien (author)
Over 5000 offshore wind turbine generators have been installed in the past decades. 80% of these wind turbines have a monopile foundation. Monopiles are hollow steel tubular piles with a diameter of up to 10m. The first phase of the monopile installation consists of the self-weight penetration into the seabed due to the mass of the monopile....
master thesis 2022
document
de Voogd, Rein (author)
Monopiles with large diameter (larger than 6 m) and low aspect ratio (less than 6) are increasingly used in offshore wind farms. These foundations demonstrate a rigid response under lateral loading. The validity of the existing design methods, that are based on small diameter flexible piles, has been questioned by both the industry and...
master thesis 2022
document
Kleisiaris, Georgios (author)
The need for sustainable solutions in the energy sector has led to the rapid increase of offshore windfarms around the globe. The areas with ideal soil conditions are gradually being occupied, pushing the offshore wind industry to search for methods of installing wind turbines in hard terrain. So far, the installation of monopiles in weak rock,...
master thesis 2022
document
Tjaberings, Jorick (author)
Adapting the size of upending cradles according to the ever-increasing dimensions of offshore wind turbine monopiles is costly and requires structural modifications to the associated Heavy Lift Vessels (HLVs). This study therefore investigates the potential of the Monopile Upending Smart Tool (MUST), which is a platform suspended in the HLV...
master thesis 2022
document
KOURTIS, YANNIS (author)
Pile tip damage due to impact with an object (boulder) during the driving process of monopiles is of main concern in the offshore wind sector. Numerical modelling could accurately describe this failure mechanism and used as a tool in practice but also for the development of appropriate guidelines. In this research project, dynamic Finite Element...
master thesis 2022
Searched for: subject%3A%22Monopiles%22
(1 - 20 of 116)

Pages