A High Input Impedance Readout Integrated Circuit based on Continuous-Time Sigma-Delta Modulator with FIR DAC Feedback

This thesis focuses on the design of a high input impedance sensor readout system based on a continuous-time sigma-delta modulator with finite-impulse-response digital-to-analog converter feedback.<br/><br/>Both the system-level and circuit-level design techniques of this system are investigated. The concept and design methods of finite-impulse...

A 590 μw, 106.6 dB SNDR, 24 kHz BW Continuous-Time Zoom ADC with a Noise-Shaping 4-bit SAR ADC

This paper presents a continuous-Time zoom ADC for audio applications. It combines a 4-bit noise-shaping coarse SAR ADC and a fine delta-sigma modulator with a tail-resistor linearized OTA for improved linearity, energy efficiency, and handling of out-of-band interferers compared to previous designs. In 160 nm CMOS, the prototype chip...

A Continuous-Time Zoom ADC for Audio Applications based on a High-Linearity OTA and a 4-bit SAR ADC

Analog-to-Digital Converters (ADCs) used in high fidelity audio applications require high linearity and a wide dynamic range (&gt;100 dB). Moreover, for use in portable electronic devices such as smartphones, tablets, and hearing aids, these ADCs must also achieve high energy efficiency. This requirement of high linearity and high energy...

eNose: An electronic nose for solid stools detection: Software perspective

This report details the software part of the development process of the eNose technology. The technology is posed by Momo Medical. Momo Medical is a start-up company located in Delft, it provides and develops non-intrusive monitoring systems in the nursing sector. The project is the next step in an already existing product: BedSense. BedSense...

A 440-μW, 109.8-dB DR, 106.5-dB SNDR Discrete-Time Zoom ADC With a 20-kHz BW

This article describes a discrete-time zoom analog-to-digital converter (ADC) intended for audio applications. It uses a coarse 5-bit SAR ADC in tandem with a fine third-order delta-sigma modulator (ΔΣM) to efficiently obtain a high dynamic range. To minimize its over-sampling ratio (OSR) and, thus, its digital power consumption, the...

Experimental study on multi-channel waveform agile beamforming and testbed calibration

In this paper, a novel multi-channel waveform agile radar testbed - ASTAP (Advanced Space-Time Adaptive Processing) with eight transmit channels and a single receive channel to form a co-located Multiple-Input Single-Output (MISO) radar is presented. Based on current configuration, the ASTAP radar system possesses agility for synthesizing and...

A Continuous-Time Zoom ADC for Low-Power Audio Applications

This article presents a continuous-Time zoom analog to digital converter (ADC) for audio applications. It employs a high-speed asynchronous SAR ADC that dynamically updates the references of a continuous-Time delta-sigma modulator (CTDSM). Compared to previous switched-capacitor (SC) zoom ADCs, its input impedance is essentially resistive,...

Real-Time 3D Characterization of Antenna Systems

The recent development of commercial phased array antennas for 5G at mm-wave frequencies (20 GHz to 60 GHz) introduces new challenges for radiation pattern characterization. Since these systems aim to employ active beamforming to steer the datastream to specific users, a single base station should be capable of deploying multiple beams...

A 280 μW Dynamic Zoom ADC With 120 dB DR 118 dB SNDR in 1 kHz BW

This paper presents a dynamic zoom analog-to-digital converter for use in low-bandwidth (&amp;lt;1 kHz) instrumentation applications. It employs a high-speed asynchronous successive approximation register (SAR) ADC that dynamically updates the references of a fully differential &amp;#x0394; &amp;#x03A3; ADC. Compared to previous zoom ADCs,...

An Element-Level Sigma-Delta ADC for Ultrasound Imaging

This work presents an architecture capable of digitizing every channel of an ultrasound transducer array independently and simultaneously. This feature is achieved by exploiting the frequency response of the piezoelectric transducer in order to save area and reduce to a minimum the required building blocks of the ADC. The transducer is used as...

Design of an Energy-Efficient Interface Circuit for a MEMS-based Capacitive Pressure Sensor

This thesis presents an incremental ?? capacitance-to-digital converter (CDC) that serves as an interface circuit for a MEMS-based pressure sensor. The thesis presents a systematic analysis of the CDC and compares different CDC architectures. A novel non-linear CDC is also proposed and analysed. Energy-efficiency of the CDC is improved by...

A 10-bit 25Msps Pipeline ADC for Companding Baseband Processing in Wireless Application

A pipelined ADC core consumes 28mW with 60.3dB SNDR, 78dB SFDR and 76dB IMD3 is obtained. Combined with expander, extra 12dB DR is achieved with equal dynamic performance because companding takes place. Compared to conventional baseband interface, power dissipation is reduced by a factor of 3.3.