Searched for: subject%3A%22Overhangs%22
(1 - 20 of 29)

Pages

document
van de Ven, Emiel (author), Driessen, Anton (author), van Keulen, A. (author), Langelaar, Matthijs (author)
abstract 2015
document
van de Ven, E.A. (author), Verboom, J.M. (author), Ayas, C. (author), Langelaar, Matthijs (author), Maas, Robert (author), van Keulen, A. (author)
abstract 2017
document
Yang, Y. (author), Ayas, C. (author), van Keulen, A. (author)
abstract 2017
document
Yang, Y. (author), Ayas, C. (author), van Keulen, A. (author)
abstract 2017
document
Munro, D.P. (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)
abstract 2017
document
Langelaar, Matthijs (author)
abstract 2017
document
Langelaar, Matthijs (author)
Advances in additive manufacturing (AM) allow economical production of components with unprecedented geometric complexity. This offers exciting opportunities for innovative designs, and particularly topology optimization has been identified as a key technique to fully exploit the capabilities of AM. However, also AM involves manufacturing...
conference paper 2016
document
Hofland, Bas (author), Passos, Marlon (author), de Almeida Sousa, E. (author)
Flood gates in storm surge barriers or outlet sluices can be prone to violent wave impacts. When an obstruction is present at the sea side above the gate, confinement of the incoming waves can lead to impulsive wave loads, even when the waves are non-breaking. The large loads can increase the stresses in the gate and structure considerably. One...
conference paper 2019
document
de Almeida Sousa, E. (author), Hofland, Bas (author), Jonkman, Sebastiaan N. (author)
The study of wave impact physics and magnitudes are key for the design of vertical coastal hydraulic structures. This research addresses the study of standing wave impacts on vertical coastal hydraulic structures with a relatively short horizontal overhang, which is especially relevant for structures such as lock gates, sluice gates, dewatering...
conference paper 2019
document
Tieleman, O.C. (author)
Flood gates form an essential part of many flood defence systems in coastal areas. During storm events, these gates are subjected to extreme loads from various sources. This dissertation addresses the dynamic behaviour of flood gates induced by wave impacts. A semi-analytical fluid-structure interaction model is developed to predict vertical...
doctoral thesis 2022
document
van de Ven, E.A. (author)
This thesis a method is described to include manufacturing constraints of the additive manufacturing process into topology optimization. Topology optimization often results in complex structures, which can only be produced by additive manufacturing. Although additive manufacturing has much fewer design restrictions compared to conventional...
doctoral thesis 2021
document
de Almeida Sousa, E. (author)
Hydraulic structures are crucial for navigation, water management and flood protection in low-lying coastal and delta regions. Their importance is expected to continue growing in the coming years, because of the consequences of climate change and the continuous development and urbanization of these regions combined with more strict safety...
doctoral thesis 2023
document
de Almeida Sousa, E. (author), Hofland, Bas (author)
This study focuses on standing wave impacts on vertical hydraulic structures with relatively short overhangs. It addresses the demand for extended knowledge and loading prediction expressions for these structures. Based on laboratory experimental data from 146 tests, this paper works on two complementary objectives. Firstly, this study extends...
journal article 2021
document
de Almeida Sousa, E. (author), Hofland, Bas (author)
The applicability of pressure-impulse theory is evaluated for predicting wave impact loading magnitudes for non-breaking standing wave impacts on vertical hydraulic structures with relatively short overhangs. To this end, tests were carried out on a schematized but realistic configuration with low steepness regular wave impacts on a straight...
journal article 2020
document
Langelaar, Matthijs (author)
Additive manufacturing (AM) offers exciting opportunities to manufacture parts of unprecedented complexity. Topology optimization is essential to fully exploit this capability. However, AM processes have specific limitations as well. When these are not considered during design optimization, modifications are generally needed in post...
journal article 2017
document
Langelaar, Matthijs (author)
The potential of topology optimization to amplify the benefits of additive manufacturing (AM), by fully exploiting the vast design space that AM allows, is widely recognized. However, existing topology optimization approaches do not consider AM-specific limitations during the design process, resulting in designs that are not self-supporting....
journal article 2016
document
Langelaar, Matthijs (author)
Additive manufacturing (AM) enables the fabrication of parts of unprecedented complexity. Dedicated topology optimization approaches, that account for specific AM restrictions, are instrumental in fully exploiting this capability. In popular powder-bed-based AM processes, the critical overhang angle of downward facing surfaces limits...
journal article 2018
document
van de Ven, E.A. (author), Maas, Robert (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)
Additive manufacturing enables the nearly uncompromised production of optimized topologies. However, due to the overhang limitation, some designs require a large number of supporting structures to enable manufacturing. Because these supports are costly to build and difficult to remove, it is desirable to find alternative designs that do not...
journal article 2018
document
Chen, X. (author), Hofland, Bas (author), Molenaar, W.F. (author), Capel, Alex (author), Van Gent, Marcel R.A. (author)
This paper describes a method of determining the reaction forces of a vertical structure with an overhang to impulsive wave impacts. The aim is to develop a method to design a hydraulic structure exposed to the impulsive wave impact. At present, there is a lack of guidelines on the designing and verification with such a purpose. The impulse...
journal article 2019
document
Langelaar, Matthijs (author)
Purpose: The purpose of this paper is to communicate a method to perform simultaneous topology optimization of component and support structures considering typical metal additive manufacturing (AM) restrictions and post-print machining requirements. Design/methodology/approach: An integrated topology optimization is proposed using two density...
journal article 2019
Searched for: subject%3A%22Overhangs%22
(1 - 20 of 29)

Pages