Searched for: subject:"Phase"
(1 - 20 of 128)

Pages

document
Laninga, Bern (author)
Several high-tech companies that develop creative new technological products fail to enter the market. For entering the market, some companies aim to use a transition from a customer engineering project to a so-called product platform. A product platform is a technological design that meets the needs of a core group of customers and can be...
master thesis 2019
document
Muis, Pjotr (author)
Shifting from coal and oil towards sustainable energy sources is currently an urgent and global challenge. Compared to coal and oil, natural gas is a cleaner fossil fuel and may serve as a transition fuel. To meet future demands for gas there is a desire to optimize the production from existing reservoirs with their production facilities. In...
master thesis 2019
document
Dees, Bram (author)
Radically new technologies, of which ‘the functionality was new to the market or the price-performance ratio was much better than contemporary products’ (Ortt, 2012), can be both risky and rewarding to develop. The innovation phase is the period from invention of a radically new technology until the first market introduction. This research into...
master thesis 2019
document
Koster, Piebe (author)
The design of a container terminal is a process that goes through a number of phases. One of the first is the concept design phase, which is needed to make a first assessment of the project's technical and financial feasibility. This phase is exploratory of nature, because of the early stage in the design cycle and consists of several tasks that...
master thesis 2019
document
Heemels, Alex (author)
This thesis discusses developments towards a low-cost Fourier Ptychographic microscope for label free imaging of malaria parasites.<br/>A review of the morphology and life cycle of malaria and the main diagnostic methods for its detection is followed by an introduction to Fourier Ptychography with emphasis on the underlying imaging principles...
master thesis 2019
document
Kremers, Arjen (author)
Offshore wind power plants are subject to adverse electrical conditions that are more severe than onshore cases, due to the long cable connection to the shore. Among these conditions are amplified voltage distortion at (inter)harmonic frequencies, as well as stability issues. An important aspect of wind turbine generator control is the phase...
master thesis 2019
document
Kensen, Chav (author)
In hospitals, the duration of surgical procedures is susceptible to a number a factors resulting in varying procedure durations of the same procedure. When these procedure times deviate from the predicted surgical duration, scheduling conflicts arise, leading to patient discomfort and inefficient use of hospital resources. Considering the aging...
master thesis 2019
document
Noppen, Marko (author)
Adaptive optics are widely used to correct the wavefront distortion imposed by atmospheric turbulence. Focal plane phase retrieval from intensity measurements has advantages due to the ease of implementation, potential broader application, less computations, low cost, high system bandwidth, simplified hardware and less calibration. To cope with...
master thesis 2019
document
Sigalas, Nikos (author)
In the present study the stability of crown wall elements on top of a rubble mound breakwaters is investigated. The first step was conducting a literature review, in order to identify knowledge gaps. It was found that current design methods do not take the freeboard of the crown wall into account when calculating the vertical force acting on it....
master thesis 2019
document
Christoforidou, Christina (author)
High-rises are usually ventilated mechanically in order to ensure thermal and acoustic comfort in the indoor environment. Consequently, the energy consumption in summer months is increased while the indoor air quality is usually deteriorated due to poor maintenance of mechanical ventilation systems. The topic of the current thesis is the design...
master thesis 2019
document
van de Ketterij, wouter (author)
Correction techniques, such as tangential iterative projections (TIP), were developed to reconstruct the image for the whole field of view. However, due to the three dimensional nature of biological tissues, induced aberrations are different throughout the field of view. This Master of Science thesis shows the development of four algorithms....
master thesis 2019
document
van Mulligen, Matthijs (author)
To provide the current population of Bospolder - Tussendijken with a future perspective that tackles socio-demographic issues, they create Phase Change Material (PCM) Modules of waste products Frying oil and Mg2+ in the cooperative factory: 'Frituurfabriek' in the M4H. They have the opportunity to participate in society, to become owner of a...
master thesis 2019
document
Ramkhelawan, Carmen (author)
Energy consumption around the world increases by the day. The primary energy usage has risen with approximately 49% and the CO2 emissions with 43% during only the last two decades. The building sector in the Netherlands contributes for approximately 36% to this energy consumption and office buildings are one of the larger consumers (Rijksdienst...
master thesis 2019
document
van Diepen, Mischa (author)
The present thesis discusses two modelling endeavours that serve to provide insights into both the magnetic and structural dynamics associated with a first order magnetic phase transition. <br/>Firstly, density functional theory has been used to model the lithiation of a supercell of 2x2x2 the conventional unit cell of the ferromagnet Fe2P....
bachelor thesis 2019
document
Pal, Botond (author)
The conducted study investigates the potential of a newly released multi-phase solver to simulate atomization in liquid rocket injectors. The "VOF-to-DPM" solver was used to simulate primary and secondary atomization in an air-blast atomizer with a coaxial injector-like geometry. The solver uses a hybrid Eulerian/Eulerian-Lagrangian formulation...
master thesis 2019
document
Hendriks, Kees Jan (author)
The following graduation thesis "A change of state: A thermodynamic and cost-effective optimized Trombe wall based on latent heat storage (LHS) for year round application” aims to investigate and optimize the thermal energy performance of a Phase change material (PCM) Trombe wall to create an economically feasible product. This passive system...
master thesis 2019
document
Brenkman, Jeroen (author)
Renewable energy projects, such as wind and solar (PV) parks, are rapidly being built to replace fossil fuel based energy sources. The major drawback of electricity production from renewable sources is that they are intermittent and therefore lead to amismatch between the supply and the demand of energy. Energy storage in the form of hydrogen...
master thesis 2019
document
Does, Luc (author)
In this thesis, the design and implementation of an improved current controller for grid-tied converters is discussed. Using this improved current controller, a power factor correction test platform achieves practically zero AC and DC error in steady-state. The power factor corrector accomplishes this by utilizing the parallel combination of a...
master thesis 2019
document
Garcia Ferrin, Patricia (author)
Indoor positioning has several variants as a result of multiple years of study on the topic. Using WiFi signals as the technology to compute the position of the target device is one of the most extended and researched techniques. WiFi Access Points are extensively deployed in all indoor environments where WiFi indoor localization has a potential...
master thesis 2019
document
Leichsenring, Maaike (author)
Ocean Thermal Energy Conversion (OTEC) uses the temperature difference between the surface and deep layers to generate electricity. The temperatures in the ocean hardly vary between day and night or between the seasons, which ensures a very constant energy production with OTEC. In order for OTEC to compete with the current forms of energy...
master thesis 2019
Searched for: subject:"Phase"
(1 - 20 of 128)

Pages