Searched for: subject:"Phase%5C+transformation"
(1 - 20 of 39)

Pages

document
Fang, H. (author)
Solid-state phase transformations in steels cover a broad range of aspects. The underlying physics behind these phase transformations usually include nucleation, diffusion, lattice reconstruction and interactions between solutes and grain boundaries and interfaces. These features and the fact that the events take place at high temperatures, in...
doctoral thesis 2019
document
Chen, Z. (author), Qu, Ying xia (author), Zeilstra, Christiaan (author), van der Stel, Jan (author), Sietsma, J. (author), Yang, Y. (author)
HIsarna is a promising ironmaking technology to reduce CO <sub>2</sub> emission. Information of phase transformation is essential for reaction analysis of the cyclone reactor of the HIsarna process. In addition, data of density and volume of the ore particles are necessary for estimation of the residence time of the particles in the cyclone...
journal article 2019
document
Farahani, H. (author)
Steels are still, and probably will remain in future, the primary choice for applications as structural materials. This is not only because of the reasonable ratios of properties over production costs, but also owing to the versatile properties realisable via variety of microstructures achieved by controlling the solid-state phase...
doctoral thesis 2018
document
Fang, H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)
The magnetic configuration of a ferromagnetic system with mono-disperse and poly-disperse distribution of magnetic particles with inter-particle interactions has been computed. The analysis is general in nature and applies to all systems containing magnetically interacting particles in a non-magnetic matrix, but has been applied to steel...
journal article 2018
document
Bojack, A. (author)
This thesis studies in-situ the phase transformations during heat treatment of two advanced steels: a supermartensitic stainless steels (SMSS), on which the main focus of this work is, and Fe-C-Mn-Si steels. A magnetic technique, based on the analysis of saturation magnetization, is utilized as the primary analysing tool. The scientific aim of...
doctoral thesis 2018
document
Sainis, Salil (author), Farahani, H. (author), Gamsjäger, Ernst (author), van der Zwaag, S. (author)
Direct microscopic observation of the isothermal bainite evolution in terms of nucleation events, the location of the nuclei, as well as their growth is very valuable for the refinement of models predicting the kinetics of bainite transformation. To this aim, the microstructural evolution in a Fe-0.2C-1.5Mn-2.0Cr alloy during isothermal...
journal article 2018
document
Farahani, H. (author), Xu, W. (author), van der Zwaag, S. (author)
Predicting the effect of alloying elements on the degree of incomplete austenite to bainite transformation in low carbon steels is of great industrial importance. This study introduces an extended Gibbs energy balance model which makes use of an additive approach to calculate the coupled effect of Mn, Si and Mo on the fraction of bainitic...
journal article 2018
document
Wu, J. (author), Petrov, R.H. (author), Kölling, S. (author), Godet, S (author), Sietsma, J. (author)
Micro- to nano-scale characterization of the microstructures in the white etching layer (WEL), observed in a Dutch R260 Mn grade rail steel, was performed via various techniques. Retained austenite in the WEL was identified via electron backscatter diffraction (EBSD), automatic crystallographic orientation mapping in transmission electron...
journal article 2018
document
Shen, K. (author)
Nanostructured materials are featured by providing a variety of favourable electrical properties, as the reduced ion and electron transport paths enable significant enhancement on (de)intercalation rates and hence high power. For TiO2 anatase, nano-sizing results in a curved open cell voltage profile with a much shorter plateau region in...
doctoral thesis 2014
document
Kostenko, A. (author)
Phase-Contrast Tomography (PCT) is becoming an important technique for nondestructive, in-situ characterization of soft and hard condensed matter. This thesis sheds light on our progress in developing novel tomographic reconstruction algorithms in combination with in-situ experimental approaches that employ propagation-based PCT. These...
doctoral thesis 2013
document
Van Westen, T. (author), Oyarzun, B. (author), Vlugt, T.J.H. (author), Gross, J. (author)
An extension of Onsager's second virial theory is developed to describe the isotropic-nematic phase transition of tangent hard-sphere chain fluids. Flexibility is introduced by the rod-coil model. The effect of chain-flexibility on the second virial coefficient is described using an accurate, analytical approximation for the orientation...
journal article 2013
document
Sharma, H. (author)
The research described in this thesis encompasses fields of 3DXRD, phase transformations and grain coarsening in iron alloys.
doctoral thesis 2012
document
Tirumalasetty, G.K. (author), Van Huis, M.A. (author), Kwakernaak, C. (author), Sietsma, J. (author), Sloof, W.G. (author), Zandbergen, H.W. (author)
Uniaxial straining experiments were performed on a rolled and annealed Si-alloyed TRIP (transformation-induced plasticity) steel sheet in order to assess the role of its microstructure on the mechanical stability of austenite grains with respect to martensitic transformation. The transformation behavior of individual metastable austenite grains...
journal article 2012
document
Kostenko, A. (author), Sharma, H. (author), Gözde Dere, E. (author), King, A. (author), Ludwig, W. (author), Van Oel, W. (author), Offerman, S.E. (author), Stallinga, S. (author), Van Vliet, L.J. (author)
This work presents the development of a non-destructive imaging technique for the investigation of the microstructure of cementite grains embedded in a ferrite matrix of medium-carbon steel. The measurements were carried out at the material science beamline of the European Synchrotron Radiation Facility (ESRF) ID11. It was shown that in-line X...
conference paper 2011
document
Gautam, J. (author)
The magnetic anisotropy of ferromagnetic materials implies the consequence that the crystallographic texture of these materials needs to be controlled during processing in order to guarantee optimum magnetic properties. The equilibrium phase transformation between the high temperature austenite phase and the low temperature ferrite, is...
doctoral thesis 2011
document
Landheer, H. (author)
The nucleation mechanisms during solid-state phase transformations in polycrystalline materials are still not completely understood. The nucleation stage has a strong influence on the overall evolution of phase transformations, which determines the final microstructure and thereby the properties of the material. The understanding of grain...
doctoral thesis 2010
document
Amirthalingam, M. (author)
The Advanced High Strength Steels (AHSS) are promising solutions for the production of lighter automobiles which reduce fuel consumption and increase passenger safety by improving crash-worthiness. Transformation Induced Plasticity Steel (TRIP) are part of the advanced high strength steels which offers a high strength and toughness combination...
doctoral thesis 2010
document
Leegwater, H. (author), Schut, H. (author), Egger, W. (author), Baldi, A. (author), Dam, B. (author), Eijt, S.W.H. (author)
We obtained evidence for the partial chemical segregation of as-deposited and hydrogenated Mg1?yTiy films (0 ? y ? 0.30) into nanoscale Ti and Mg domains using positron Doppler-broadening. We exclusively monitor the hydrogenation of Mg domains, owing to the large difference in positron affinity for Mg and Ti. The electron momentum distribution...
journal article 2010
document
Singh, S. (author)
The global energy issues can be solved by the abundantly available hydrogen on earth. Light metals are a compact and safe medium for storing hydrogen. This makes them attractive for vehicular use. Unfortunately, hydrogen uptake and release is slow in light metals at practical temperature and pressure conditions. Catalysts are known to accelerate...
doctoral thesis 2009
document
Pujada, B.R. (author), Tichelaar, F.D. (author), Arnoldbik, W.M. (author), Sloof, W.G. (author), Janssen, G.C.A.M. (author)
Growth stress in tungsten carbide-diamond-like carbon coatings, sputter deposited in a reactive argon/acetylene plasma, has been studied as a function of the acetylene partial pressure. Stress and microstructure have been investigated by wafer curvature and transmission electron microscopy (TEM) whereas composition and energy distribution...
journal article 2009
Searched for: subject:"Phase%5C+transformation"
(1 - 20 of 39)

Pages