- document
-
Zhu, Jia-Ning (author)Shape memory alloys (SMAs), such as nickel-titanium (NiTi) alloys or Nitinol, possess remarkable properties, including superelasticity and shape memory effects, which are attributed to the reversible martensitic transformation. However, traditional manufacturing of NiTi SMAs is challenging due to its high ductility and reactivity, which limits...doctoral thesis 2023
- document
-
Arrieta Rodriguez, Ana (author)Laser Powder Bed Fusion (LPBF) is a metal additive manufacturing process in which a three-dimensional object is obtained by selectively melting and fusing a metallic powder with a heat source, such as a laser beam, in successive thin layers. This process allows to create lightweight parts with complex geometry. However, parts created by LPBF...master thesis 2023
- document
-
Scherpenhuijsen Rom, Erik (author)This paper provides an initial feasibility study of the potential installation of iron powder energy generation systems aboard a marine service vessel. After a short introduction as to the relevance of this study, the state-of-the-art iron powder energy generation is investigated. This information is then used to decide which marine service...master thesis 2023
- document
-
Mohandas, N.K. (author), Giorgini, Alex (author), Vanazzi, Matteo (author), Riemslag, A.C. (author), Scott, S.P. (author), Popovich, V. (author)This study investigated the in-situ gaseous (under 150 bar) hydrogen embrittlement behaviour of additively manufactured (AM) Inconel 718 produced from sustainable feedstock. Here, sustainable feedstock refers to the Inconel 718 powder produced by vacuum induction melting inert gas atomisation of failed printed parts or waste from CNC machining....journal article 2023
- document
-
Zhu, Jia-Ning (author), Liu, K. (author), Riemslag, A.C. (author), Tichelaar, F.D. (author), Borisov, Evgenii (author), Yao, Xiyu (author), Popovich, Anatoly (author), Huizenga, R.M. (author), Hermans, M.J.M. (author), Popovich, V. (author)Superelastic metallic materials possessing large recoverable strains are widely used in automotive, aerospace and energy conversion industries. Superelastic materials working at high temperatures and with a wide temperature range are increasingly required for demanding applications. Until recently, high-temperature superelasticity has only...journal article 2023
- document
-
Zhang, F. (author), Wu, K. (author), La Zara, D. (author), Sun, F. (author), Quayle, Michael J. (author), Petersson, Gunilla (author), Folestad, Staffan (author), Chew, Jia Wei (author), van Ommen, J.R. (author)For dry powder inhaled formulations, good flow behaviour is vital in re-dispersing the powder. However, inhaled drug powders with a particle size below 10 µm are classified as highly cohesive materials with poor flow characteristics. Here we demonstrate how to alter the flow properties of micronized budesonide powders by depositing different...journal article 2023
- document
-
Li, Erlei (author), Shen, Haopeng (author), Wang, L. (author), Wang, Geoff (author), Zhou, Zongyan (author)The shape variation of the laser beam is evidently observed in the laser powder bed fusion (LPBF) process because of changes in laser incidence angle and misalignment between the build plate and the laser focus plane. This issue is particularly relevant in large-scale LPBF systems where the laser beam needs to scan a large build area. However...journal article 2023
- document
-
Wang, L. (author), Li, Erlei (author), Zhou, Zongyan (author), Zhang, Baicheng (author), Yu, Aibing (author)Powder bed fusion additive manufacturing has been applied to the fabrication of functionally graded materials. A new design that allows the material composition to change along the direction perpendicular to the powder spreading has been reported in the literature. Based on this design, this work examines the quality of the graded spread...journal article 2023
- document
-
Sun, Lingqi (author), Chen, K. (author), Geng, Peng (author), Zhou, Yan (author), Wen, Shifeng (author), Shi, Yusheng (author)Porous NiTi lattice structures are widely used in the manufacture of crucial components owing to their excellent shape memory effect, superelasticity, and high damping capacities. However, the specific strength and lightweight characteristics of porous NiTi lattice structures fabricated by conventional technologies are limited by...journal article 2023
- document
-
Zhu, Jia-Ning (author), Zhu, Weijia (author), Borisov, Evgenii (author), Yao, Xiyu (author), Riemslag, A.C. (author), Goulas, Constantinos (author), Popovich, Anatoly (author), Yan, Z. (author), Tichelaar, F.D. (author), Mainali, D.P. (author), Hermans, M.J.M. (author), Popovich, V. (author)Additive manufacturing of NiTi shape memory alloys has attracted attention in recent years, due to design flexibility and feasibility to achieve four-dimensional (4D) function response. To obtain customized 4D functional responses in NiTi structures, tailorable phase transformation temperatures and stress windows as well as one-way or two-way...journal article 2023
- document
-
De Kwant, Jochem (author), Hekkenberg, R.G. (author), Souflis-Rigas, A.S.R. (author), Kana, A.A. (author)This article examines the potential implications of using iron powder as an alternative fuel on the design and performance of container ships. Iron powder is a relatively new alternative energy carrier and one in which little research has been done into the application on-board vessels as part of the maritime energy transition. The key...journal article 2023
- document
-
Zhu, Jia-Ning (author), Ding, Z. (author), Borisov, Evgenii (author), Yao, Xiyu (author), Brouwer, J.C. (author), Popovich, Anatoly (author), Hermans, M.J.M. (author), Popovich, V. (author)The pursuit of enhancing NiTi superelasticity through laser powder bed fusion (L-PBF) and [001] texture creation poses a challenge due to increased susceptibility to hot cracking in the resulting microstructure with columnar grains. This limitation restricts NiTi's application and contributes to material waste. To overcome this, we introduce...journal article 2023
- document
-
Liu, M. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Borisov, E. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)Electrochemical tests and surface analysis were applied to study the corrosion behavior and passive film characteristics of three-dimensional-printed NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF) in artificial saliva at 37 °C. The passivity of L-PBF NiTi shows to be influenced by the process parameters and resulting...journal article 2023
- document
-
Liu, M. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Borisov, E. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)Electrochemical tests and surface analysis measurements were performed to study the corrosion behavior in a 0.9 wt.% NaCl solution at 37 °C of three NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF). The passive film characteristics and corrosion resistance of L-PBF NiTi showed different features as a function of their...journal article 2023
- document
-
Ranjan, R. (author), Langelaar, Matthijs (author), van Keulen, A. (author), Ayas, C. (author)Computational process modelling of metal additive manufacturing has gained significant research attention in recent past. The cornerstone of many process models is the transient thermal response during the AM process. Since deposition-scale modelling of the thermal conditions in AM is computationally expensive, spatial and temporal...journal article 2023
- document
-
van der Zwet, J.M. (author), Delissen, A.A.T.M. (author), Langelaar, Matthijs (author)Topology optimization has seen increased interest with the rise of additive manufacturing (AM) as a fabrication method, because of its ability to exploit the geometric complexity that AM offers. However, AM still imposes some geometric restrictions on the design, most notably on minimum feature size, overhang angles, and enclosed voids....journal article 2023
- document
-
Zhang, Bin (author), Gao, Xu (author), Xu, S. (author), Yang, Xinkui (author), Tian, Qin (author), Liu, Jiayi (author)Microwave heating is an effective method to achieve autonomic crack healing in asphalt mixtures, and the use of microwave-absorbing materials can largely improve this healing efficiency. As a solid waste, coal gangue contains metal oxides, which shows the possibility of microwave heating. In order to further promote the application of coal...journal article 2023
- document
-
O'Connell, Ken (author), Olaleye, Akeem K. (author), van den Akker, H.E.A. (author)The development of a novel numerical model for droplet drying is the topic of this paper. The three main stages of droplet drying are distinguished, viz. unhindered evaporation of a ’wet’ particle (the droplet), restricted drying at a falling rate due to the formation of a crust around a wet core, and inert heating of the dry porous particle....journal article 2023
- document
-
Mohandas, Naveen (author)Laser powder bed fusion (L-PBF) is an additive manufacturing (AM) technology that has been gaining a lot of interest as it allows to produce parts with complex geometries and eliminate expensive tooling. Unlike the conventional manufacturing processes where material is removed to make the final component; AM part is manufactured layer-wise as...master thesis 2022
- document
-
Terol Sanchez, María (author)This study addresses the effects of additive manufacturing (AM) parameters and post-processing heat treatments on the microstructure and fracture toughness behavior of functionally graded and non-graded Inconel 718. Laser powers of 250W and 950W were used to fabricate non-graded and graded specimens. To study the effects of the microstructural...master thesis 2022