Searched for: subject%3A%22Quenching%255C+and%255C+Partitioning%22
(1 - 20 of 24)

Pages

document
Sierra Soraluce, A. (author), Li, G. (author), Santofimia, Maria Jesus (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Muratori, M. (author), Sabirov, I. (author)
Recent studies have demonstrated the viability of quenching and partitioning (Q&P) treatment for processing martensitic stainless steels showing an improved balance of high strength and sufficient ductility. However, to date, the fatigue behaviour of these materials has not been explored. This study examines the effect of their complex...
journal article 2023
document
Li, Jiayu (author), Xu, Yunbo (author), Jing, Yi (author), Gao, Yijing (author), Liu, Hongliang (author), Yu, Yongmei (author), Banis, Alexandros (author), Kestens, L.A.I. (author), Petrov, R.H. (author)
The phase transformations, microstructure and properties of two Medium-Mn processed via quenching and partitioning steels were compared in this contribution and a new strategy for controlling mechanical properties by introducing and controlling cold-worked ferrite prior to heat treatment is proposed. It was found that during heating, the...
journal article 2023
document
Sierra Soraluce, A. (author), Li, G. (author), Santofimia, Maria Jesus (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Muratori, M. (author), Sabirov, I. (author)
Quenching and partitioning (Q&P) treatment has been proven effective in manufacturing advanced high strength steels with high content of retained austenite, showing the improved balance of high strength and sufficient ductility. This method has been very well elaborated for carbon steel processing over the last two decades. Though it can...
journal article 2023
document
Castro Cerda, F. (author), Goulas, Constantinos (author), Hernández, Eliseo I. (author), Sanhueza, Juan P. (author), Ros-Yanez, Tanya (author), Petrov, R.H. (author)
Isothermal heat treatments below the martensite start temperature are carried out in a 0.25C-1.4Mn-1.4Si-0.32Mo steel (in wt%). The microstructural observation reveals a combination of tempered lath and plate martensite, accompanied by bainite and retained austenite. The temperature variation of the austenitic carbon content under different...
journal article 2023
document
Arribas, Maribel (author), Del Molino, Eider (author), Gutiérrez, Teresa (author), Arlazarov, Artem (author), Martin, David (author), De Caro, Daniele (author), Ayenampudi, S. (author), Santofimia, Maria Jesus (author)
In this work, a medium Mn-Ni steel was treated through Quenching and Partitioning (Q&P) with a partitioning temperature (PT) of 650 °C, which corresponded to the start of the austenite reverse transformation (ART) phenomenon. The influence of the quenching temperature (QT) and partitioning time (Pt) on austenite stabilization and mechanical...
journal article 2022
document
Xia, P. (author), Vercruysse, F. (author), Celada-Casero, Carola (author), Verleysen, P. (author), Petrov, R.H. (author), Sabirov, I. (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Linke, B. (author), Frometa, D. (author)
The article focuses on the effect of alloying and microstructure on formability of advanced high strength steels (AHSSs) processed via quenching and partitioning (Q&P). Three different Q&P steels with different combination of alloying elements and volume fraction of retained austenite are subjected to uniaxial tensile and Nakajima...
journal article 2022
document
Echeverri, Edwan Anderson Ariza (author), Nishikawa, A.S. (author), Masoumi, Mohammad (author), Pereira, Henrique Boschetti (author), Marulanda, Nelson Granda (author), Rossy, Andrés Márquez (author), Goldenstein, Hélio (author), Tschiptschin, André Paulo (author)
A novel combined process of Cold Stamping (CS) and Hot Stamping (HS) with Quenching and Partitioning (Q&P) treatment applied to advanced TRIP-assisted steel has been conducted by thermomechanical simulation to evaluate the influence of CS or HS in the Q&P processing. With this purpose, Q&P, CSQ&P, and HSQ&P cycles were...
journal article 2022
document
AKMAN, ADNAN (author)
The fuel consumption of cars has become an important issue in the development of new materials and. These developments resulted in the generation of new grades of steel for the automotive industry. In particular, new advanced high strength steels (AHSS) have been developed for the automotive industry to lower fuel consumption (with weight...
master thesis 2021
document
Crousen, Leon (author)
A long standing research field in material science has been the trade-off between strength and ductility of steels. Advanced High Strength Steels (AHSS) aim to combine these two properties and provide steels that can increase safety and lower CO2 consumption in automotive applications, by decreasing weight. To further decrease the environmental...
master thesis 2021
document
de Bakker, Benne (author)
Quenching and Partitioning (Q&P) is a novel steel heat treatment to create microstructures containing martensite and retained austenite. In recent years, there has been a growing interest in applying Q&P treatments to martensitic stainless steels with the aim to create stainless steels with the mechanical properties...
master thesis 2021
document
Koopmans, T.T.W. (author), Sietsma, J. (author), Zhao, L. (author), Santofimia, Maria Jesus (author)
The quenching and partitioning (Q&P) process is a heat treatment process, aiming at the creation of steel microstructures composed of martensite and retained austenite. Herein, the thermal stability of the microstructure is investigated upon reheating steel microstructures, created with different Q&P settings, in different thermal...
journal article 2021
document
Chai, Zhisong (author), Hu, Jun (author), Wang, Chenchong (author), Wang, Lingyu (author), Sun, Weihua (author), van der Zwaag, S. (author), Xu, W. (author)
Herein, the effect of Nb content on the phase transformation kinetics, microstructure, and mechanical properties of hot-rolled quenching and partitioning (Q&P) steel is investigated. The characteristics of three C–Mn–Si–Ti steels (0.18C, 2.0Si, 2.6Mn, and 0.015Ti) containing 0, 0.027, or 0.061 wt% Nb are compared. Results reveal that...
journal article 2021
document
Koufis, Stratos (author)
Quenching and partitioning (Q&P) is a novel processing route that can create microstructures that combine high strength, ductility and easy formability without the excess use of alloying elements by also keeping the production cost low. Therefore, this method is ideal to be applied to steels that are used in the automotive industry. The...
master thesis 2020
document
Arribas, Maribel (author), Gutiérrez, Teresa (author), Del Molino, Eider (author), Arlazarov, Artem (author), De Diego-Calderón, Irene (author), Martin, David (author), De Caro, Daniele (author), Ayenampudi, S. (author), Santofimia, Maria Jesus (author)
In this work, four low carbon steels with different contents of Mn and Ni were heat treated by quenching and partitioning (Q&P) cycles where high partitioning temperatures, in the range of 550 °C–650 °C, were applied. In order to elucidate the effect of applying these high partitioning temperatures with respect to more common Q&P cycles,...
journal article 2020
document
Hidalgo Garcia, J. (author), Celada-Casero, Carola (author), Santofimia, Maria Jesus (author)
A medium-Mn steel, exhibiting manganese macrosegregation, was investigated. In order to study how the microstructure development influences the fracture mechanisms, the steel was quenching and partitioning processed using two different partitioning temperatures. At 400 °C partitioning temperature, the microstructure exhibits intergranular...
journal article 2019
document
Ayenampudi, S. (author), Celada-Casero, Carola (author), Sietsma, J. (author), Santofimia, Maria Jesus (author)
Medium-Mn Quenching & Partitioning (Q&P) steels have been recently considered as potential candidates for the 3rd generation advanced high-strength steels. The processing of these steels aims to induce the partitioning of substitutional alloying elements from martensite to austenite during an isothermal treatment at high temperature,...
journal article 2019
document
Muhammad Fakhry Hatta, Fakhry (author)
Abstract<br/>The Quenching and Partitioning (Q&amp;P) process starts with an austenitization process followed by rapid cooling to a temperature named quenching temperature ranged between the martensite start (M<sub>s</sub>) and martensite finish (M<sub>f</sub>) temperatures to establish initial fractions of martensite and austenite. Afterwards,...
master thesis 2018
document
Nishikawa, A.S. (author), Santofimia, Maria Jesus (author), Sietsma, J. (author), Goldenstein, Hélio (author)
In the present study the microstructural evolution and kinetics of carbon redistribution during the partitioning step of the Quenching and Partitioning process are investigated by means of a modeling approach that simultaneously considers the martensite-austenite carbon partitioning and the decomposition of austenite into bainitic ferrite....
journal article 2018
document
Hidalgo Garcia, J. (author), Findley, K.O. (author), Santofimia, Maria Jesus (author)
The mechanical and thermal stability of austenite in multiphase advanced high strength steels are influenced by the surrounding microstructure. The mechanisms underlying and the relations between thermal and mechanical stability are still dubious due to the difficulty of isolating other factors influencing austenite stability. In this work,...
journal article 2017
document
Findley, K.O. (author), Hidalgo Garcia, J. (author), Huizenga, R.M. (author), Santofimia, Maria Jesus (author)
The role of retained austenite on tensile behavior in quenched and partitioned (Q&amp;P) steels has been studied extensively, but the deformation behavior of martensite, which comprises the majority of Q&amp;P microstructures, has received less attention. In this investigation, martensite properties were varied through heat treatment in a low...
journal article 2017
Searched for: subject%3A%22Quenching%255C+and%255C+Partitioning%22
(1 - 20 of 24)

Pages