Searched for: subject%3A%22RAM%22
(1 - 20 of 31)

Pages

List view
Grid view
document
Sykiotis, Angeliki (author)
The driving force for this research was the rising need for additional supported living housing for intellectually disabled adults steering towards their social inclusion; besides all the efforts so far, there is a strong necessity to improve the architectural environment offered to this population.<br/>The study of the relevant literature and...
master thesis 2023
document
Hoogerdijk, Tom (author)
Hydrogen is seen as a potential energy carrier for the next generation of aircraft that will be more climate-friendly than the previous generation of kerosene-powered aircraft. Two types of hydrogen-based propulsion systems are currently foreseen for such aircraft: hydrogen combustion and hydrogen fuel cell. In addition to producing useful...
master thesis 2023
document
Scoccimarro, Antonio (author)
Hydrogen fuel cells are set to play an important role in decarbonizing the aviation sector. They operate at higher efficiencies than turbine engines, but their low operating temperature requires a dedicated thermal management system. The added drag, weight and parasitic power of such a system has a high impact on aircraft performance and its...
master thesis 2023
document
Mézière, Lucas (author)
The ecological question is symptomatic of our time and a multi-disciplinary problem. The material manipulations produced by the architectural and urban design disciplines interfere with essential ecosystemic processes by introducing disruptive materialities and machinery. This work aimed to participate in shaping a solid foundation for the...
master thesis 2023
document
Thedens, Paul (author), Schmehl, R. (author)
Similar to parafoils, ram-air kites are flexible membrane wings inflated by the apparent wind and supported by a bridle line system. A major challenge in estimating the performance of these wings using a computer model is the strong coupling between the airflow around the wing and the deformation of the membrane structure. In this paper, we...
journal article 2023
document
Cervone, A. (author), Topputo, F. (author), Franzese, V. (author), Pérez-Silva, A. Rodríguez (author), Leon, B. Benavent (author), Garcia, B. Delmas (author), Minacapilli, P. (author), Rosa, P. (author), Bay, G. (author), Radu, S. (author)
The paper presents the initial outcomes of a project, currently ongoing under the supervision of the European Space Agency, having the main objective to specify and design a Fault Detection Isolation and Recovery (FDIR) system by making use of relevant RAMS (Reliability, Availability, Maintainability, Safety) analyses for missions in non...
journal article 2023
document
Carrillo Córcoles, X. (author), Sodja, J. (author), De Breuker, R. (author)
The ram air inlets flaps are used in some aircraft to modulate the amount of ram<br/>air cooling the Environmental Control System. The current flap design features two metallic plates connected with a hinge. The present work studies an alternative design that replaces the metallic plates with a single composite laminate with morphing...
conference paper 2023
document
Fieback, M. (author)
Resistive random access memory (RRAM) is a promising emerging memory technology that offers dense, non-volatile memories that do not consume any static power. Furthermore, RRAMdevices can be written and read out in nanoseconds, and it is possible to use them to performcomputation-in-memory (CIM). These benefits make this technology a potential...
doctoral thesis 2022
document
Kiliçaslan, Ecem (author)
In the summer of 2021, an exceptional number of 270 wildfires took place among the entire Turkish coast. Multiple villages have been destroyed. Villagers lost their loved ones, houses and income sources. According to climate scientists, the wildfires will occur more often due to hotter summers. This emerges the question on how destroyed villages...
master thesis 2022
document
Gordebeke, Coen (author)
The project proposes a bathhouse for Teraizije Terrace in Belgrade. It is not intended as a place of repose or contemplation, but as an urban void, a receptive space that listens to its users instead of speaking to them. Kenya Hara's sensibility of 'emptiness', which he calls 'whiteness', is used as a leading figure to create such a place....
master thesis 2022
document
Thedens, P. (author)
The airborne wind energy (AWE) technology aims to utilise tethered wings to harvest wind energy at altitudes conventional wind turbines cannot reach. There are two distinct methods to harvest airborne wind energy: onboard and ground-based generation. The onboard generation is achieved through flying fast manoeuvres driving propellers attached to...
doctoral thesis 2022
document
van Leenen, Ryan (author)
Some server hosters facilitate cyber crime either intentionally (so called “bulletproof hosters”) or unintentionally (“bad hosters”). When dealing with uncooperative hosters during forensic investigations, it may sometimes be necessary to collect data or information on the servers without help from the owner of the server....
master thesis 2021
document
Bessa E Silva Machado Vilaça, Joana (author)
Environmental activism requires effective communication to a wide audience in order to highlight ongoing issues around the world. Art and environmental art in particular, can be a powerful tool to showcase this type of complex issues and can be used to raise awareness of the seriousness of the problem at hand. Museums, as trusted institutions,...
master thesis 2021
document
Gunnarsdóttir, Sunnefa (author)
The growing interest in rammed earth construction globally has yet to reach the Icelandic building industry which lags behind in sustainable construction methods. Despite the rich history of earth construction with local turf, standardized practices and imported materials dominate the building practice today. Earth is a readily available...
master thesis 2021
document
Leung, K.C. (author)
A low-speed aerodynamic analysis on the conventional NACA ram-air inlet of the Airbus A320 with a new closure flap was conducted. The conventional closure flap mechanism inside the NACA ram-air inlet is replaced by a morphing plate design. Steady-state Reynolds-Averaged Navier-Stokes (RANS) based Computational Fluid Dynamics (CFD) simulations...
master thesis 2020
document
Aziza, H. (author), Moreau, M. (author), Fieback, M. (author), Taouil, M. (author), Hamdioui, S. (author)
Energy efficiency remains one of the main factors for improving the key performance markers of RRAMs to support IoT edge devices. This paper proposes a simple and feasible low power design scheme which can be used as a powerful tool for energy reduction in RRAM circuits. The design scheme is exclusively based on current control during write...
journal article 2020
document
Mees, Nora (author)
The marine area in Amsterdam, currently only partially publicly available, needs to be reintegrated into the public space. To start the reintegration process, a swimming pool and spa, which both meets the identity of the area and the vision of the municipality, will be added to this area. A new central route is placed through the marine area on...
master thesis 2019
document
Leone, Silvia (author)
A river garden punctuated by 9 pavilions along the River Arzobispo, in Teusaquillo - Bogotá. The design proposal involves 3 levels of intervention : <br/>- the urban/ecological scale for the re-naturalisation of the currently polluted river Arzobispo; <br/>- landscape design for the articulation of the river bed and the zoning of the garden; <br...
master thesis 2019
document
Thedens, P. (author), De Oliveira Andrade, G.L. (author), Schmehl, R. (author)
We present a multidisciplinary design optimization method for the profile and structural reinforcement layout of a ram‐air kite rib. The aim is to minimize the structural elastic energy and to maximize the traction power of a ram‐air kite used for airborne wind energy generation. Because of the large deformations occurring during flight, a fluid...
journal article 2019
document
Vatajelu, E.I. (author), Prinetto, Paolo (author), Taouil, M. (author), Hamdioui, S. (author)
The research and prototyping of new memory technologies are getting a lot of attention in order to enable new (computer) architectures and provide new opportunities for today’s and future applications. Delivering high quality and reliability products was and will remain a crucial step in the introduction of new technologies. Therefore,...
journal article 2019
Searched for: subject%3A%22RAM%22
(1 - 20 of 31)

Pages

List view
Grid view