Searched for: subject%3A%22Rheological%255C%252Bproperties%22
(1 - 20 of 20)
document
Lin, P. (author), Liu, X. (author), Erkens, S. (author), Welvaarts, Bart (author), Brouns, Koen (author)
Cold in-place recycling is gaining more attention worldwide because of its lower energy consumption, while the normally used asphalt emulsion and foamed asphalt cannot meet this requirement of short traffic disturbance and road performance of the surface layer. In this research, a polyurethane-modified cold binder (PMCB) was designed and...
journal article 2023
document
Niu, D. (author), Zhang, Zhao (author), Gao, Y. (author), Li, Yuanxiao (author), Yang, Zhengxian (author), Niu, Yanhui (author)
Cow dung waste has caused severe environmental pollution and public health issues in China. In this study, the cow dung residues were used as a cheap renewable fiber to modify asphalt binder, providing a new solution for the proper disposal of cow dung waste. Three cow dung fibers with two lengths were prepared using different treatments,...
journal article 2023
document
Chen, Bei (author), Yu, Xin (author), Dong, Fuqiang (author), Wu, Wenxiu (author), Zu, Yuanzhe (author), Ren, S. (author)
High-viscosity modified asphalt (HVMA) is the most commonly applied method in drainage asphalt pavements. However, some disadvantages of hot-mix HVMA, including high energy consumption and unavoidable environmental pollution, should be improved. Therefore, warm-mix additive (WMA) was introduced. In this paper, the effects of WMA on the...
journal article 2023
document
Xiao, Yue (author), Ju, Xinjiang (author), Li, Chao (author), Wang, Tianlei (author), Mr. Wu, R.W. (author)
The reuse in high-value materials is one of the important resource utilization approaches of phosphorus tailings. At present, a mature technical system has been formed on the reuse of phosphorus slag in building materials, and silicon fertilizers in the extraction of yellow phosphorus. But there is a lack of research on the high-value reuse...
journal article 2023
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Liang, X. (author), Liu, C. (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Using solid waste to replace limestone filler in asphalt concrete can not only reduce the cost of road construction, but also improve the utilization rate of solid waste. In this study, PHC pile waste concrete (PPWC) was innovatively used to replace limestone filler in asphalt mixture and its effect on the physical and rheological properties...
journal article 2023
document
Wang, Sheng (author), Huang, Weidong (author), Liu, X. (author), Lin, P. (author)
The goal of this study was to investigate the effect of styrene-butadiene-styrene (SBS) polymer on the aging properties of high-content terminal blend rubber modified asphalt (HCTBMA). All asphalt was tested for chemo-rheological properties using an attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) test,...
journal article 2023
document
Zou, Yingxue (author), Xu, Haiqin (author), Xu, S. (author), Chen, Anqi (author), Wu, Shaopeng (author), Amirkhanian, Serji (author), Wan, Pei (author), Gao, Xiang (author)
Moisture erosion is one of the key factors leading to asphalt pavement damage, and the erosion depth indicates the moisture damage level but it is usually neglected. In order to study the moisture erosion and the erosion depth, this study characterized the chemical structure, rheological property and adhesion property of asphalt at different...
journal article 2023
document
Wang, Sheng (author), Huang, Weidong (author), Liu, X. (author), Lin, P. (author)
The influence of sulfur on the chemical, rheological, and aging resistance of terminal blend rubberized bitumen (TBRB) was studied. TB hybrid bitumen (TBHB) was prepared from with different sulfur contents (0.1, 0.2, 0.3, 0.4 wt%) and TBRB prepared with neat bitumen and crumb rubbers at 20% content. TBHB binders were aged by rolling thin film...
journal article 2022
document
Ren, S. (author), Liu, X. (author), Lin, P. (author), Erkens, S. (author)
This study investigated the effects of swelling-degradation degree on the rheological properties and thermal pyrolysis behaviors of crumb rubber modified bitumen (CRMB). The equilibrium viscosity of CRMB in 160 ◦Cswelling process is 10.5 Pa·s at 8 h. During the 200℃-degradation procedure, the viscosity increased to a maximum value of 20.58 Pa·s...
journal article 2022
document
Wang, S. (author), Huang, Weidong (author), Liu, X. (author), Lin, P. (author)
The chemical and rheological properties of terminal blend hybrid asphalt (TBHA) contributing to the consumption of waste tires before and after aging were studied. Styrene-butadiene-styrene (SBS) polymer, sulphur, crumb rubber (CR), and neat asphalt were chosen to prepare the TBHA. The short-term aging (STA) and long-term aging (LTA) of TBHA...
journal article 2022
document
Zhang, Canlin (author), Dong, Hongjun (author), Yan, Zhengli (author), Yu, Meng (author), Wang, Ting (author), Xu, S. (author), Jiang, Zhenliang (author), Hu, Changbin (author)
SBS-modified bitumen (SMB) is susceptible to aging, which seriously influences its service performance and life. In order to strengthen the anti-aging ability of SMB, triethoxyvinylsilane was designed to organically modify layered double hydroxides (LDHs) and was applied to modify SMB. The dispersibility and storage stability of LDHs in SMB...
journal article 2021
document
Gao, Y. (author), Zhang, Yuqing (author), Omairey, Eman L. (author), Al-Malaika, Sahar (author), Sheena, Husam (author)
The aim of this study was to investigate the effects of different anti-ageing compounds (AACs) on the oxidative stability, rheological and mechanical properties of bitumen. Modified bitumen samples containing six different AAC combinations, with five samples containing Irganox acid (3,5-di-tert-butyl-4-hydoxyphenylpropionic acid), a hindered...
journal article 2021
document
Wang, H. (author), Liu, X. (author), Apostolidis, P. (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
Aging during construction and in-service substantially changes the chemical composition and physical properties of bitumen thereof influences the performance of asphalt pavements. The modification of bitumen by crumb rubber modifier (CRM) significantly increases the complexity of the aging mechanism and is expected to improve the aging...
journal article 2020
document
Yalçinkaya, Ç. (author), Felekoglu, Burak (author), Yazici, Halit (author)
Rheology and shrinkage are the key features that should be controlled to perform a successful casting process and obtain a durable ultra-high performance concrete (UHPC). It is anticipated that cast-in-situ applications of UHPC will increase in the near future, so the studies on early-age properties of UHPC have come into prominence. However,...
journal article 2020
document
Li, Huajian (author), Huang, Fali (author), Yi, Zhonglai (author), Wang, Zhen (author), Zhang, Y. (author), Yang, Zhengxian (author)
Rheological properties are of significant importance in successful placement and performance of self-compacting concrete (SCC). In this work, the rheological properties of SCC, combined with a powder-viscosity modifying admixture, were investigated based on a series of experimental studies. The modified Bingham model was applied to determine...
journal article 2020
document
Wang, H. (author), Lu, Guoyang (author), Feng, Shuyin (author), Wen, Xiaobo (author), Yang, Jun (author)
Pyrolytic carbon black (CB <sub>p</sub> ) from scrap tire pyrolysis is a potential modifier for the bitumen industry. Binders containing different contents of CB <sub>p</sub> were prepared and experimentally investigated to examine the effects of CB <sub>p</sub> on the electrical and thermal conductivity, conventional physical properties,...
journal article 2019
document
Ren, S. (author), Liu, X. (author), Fan, Weiyu (author), Wang, H. (author), Erkens, S. (author)
A styrene-butadiene-styrene (SBS) latex modifier can be used for asphalt modification due to the fact of its energy-saving, construction convenience, and economic advantages. The objective of this study was to investigate the influence of asphalt type and SBS latex dosage on the rheological properties, compatibility, and storage stability of...
journal article 2019
document
Sun, Z. (author), Yi, Junyan (author), Chen, Zining (author), Xie, Sainan (author), Xu, Meng (author), Feng, Decheng (author)
The chemical and rheological properties of polymer modified bitumen incorporating bio-oil derived from waste cooking oil (WCO) were investigated in this paper. At first, the chemical composition and mixing mechanism of the experimental materials were analysed from the perspective of functional group, and the influence of bio-oil on the...
journal article 2019
document
van Dijk, Y. L.M. (author), Grätzl, T. (author), Abouhamzeh, M. (author), Kroll, L. (author), Shroff, S. (author)
This paper presents results of material characterisation experiments on the hygrothermal viscoelastic behaviour of unidirectional laminates of continuous carbon-fibre reinforced polyamide 6. The material behaviour when subjected to the automotive painting process is of interest. Coefficients of thermal- and -moisture expansion were determined...
journal article 2018
document
Van Kessel, T. (author)
In order to predict the stain and shear rate response of cohesive sediment suspensions to applied forces, their rheological properties have to be known. In this report the rheological properties of both China clay, an artificial mud, and Caland channel mud, a natural mud, are investigated. Four types of experiments are involved: equilibrium flow...
report 1996
Searched for: subject%3A%22Rheological%255C%252Bproperties%22
(1 - 20 of 20)