Searched for: subject%3A%22Seed%22
(1 - 20 of 36)

Pages

document
Ambrosini, P. (author), Azizian Amiri, S. (author), Zeestraten, Eliane (author), van Ginhoven, Tessa (author), Marroquim, Ricardo (author), van Walsum, T. (author)
Purpose: For tumor resection, surgeons need to localize the tumor. For this purpose, a magnetic seed can be inserted into the tumor by a radiologist and, during surgery, a magnetic detection probe informs the distance to the seed for localization. In this case, the surgeon still needs to mentally reconstruct the position of the tumor from the...
journal article 2024
document
Nederstigt, Wouter (author)
For the use of screening potential glassmaking recipes the seeding method has been applied to a Molecular Dynamics simulated CaO-SiO₂ system in order to attain the parameters for the Classical Nucleation Theory and construct a Time-Temperature-Transformation (TTT) diagram. Using this TTT diagram, the non-crystallisation temperature and the...
master thesis 2023
document
Mazurovs, Maxim (author), Schat, Daan (author)
This thesis presents the design and development of a UV-C LED-based seed treatment machine aimed at enhancing seed quality by the extermination of pathogens. The research covers design choices, including a round irradiation pattern, consisting of two rings with three and nine LEDs for the inner and outer ring respectively, the use of a quartz...
bachelor thesis 2023
document
Ergül, Erman (author), van Weelderen, Erik (author)
In this thesis for the Bachelor’s Degree in Electrical Engineering, a Control Unit (PCB and software) is designed for inside the UVC Seed Disinfection Machine of Team UVO. The machine consists of four modules: the Control Unit, the LED Driver, the motor controller and the power supply. The Control Unit allows a user to input the intensity per...
bachelor thesis 2023
document
Scharnke, Jule (author), van Essen, S.M. (author), Seyffert, Harleigh C. (author)
In the assessment of wave-in-deck loads for new and existing maritime structures typically model tests are carried out. To determine the most critical conditions and measure sufficient impact loads, a range of sea states and various seeds (realisations) for each sea state are tested. Based on these measurements, probability distributions can...
journal article 2023
document
Liu, Z. (author), Baluchová, S. (author), Brocken, Bob (author), Ahmed, Essraa (author), Pobedinskas, Paulius (author), Haenen, Ken (author), Buijnsters, J.G. (author)
Fabrication of patterned boron-doped diamond (BDD) in an inexpensive and straightforward way is required for a variety of practical applications, including the development of BDD-based electrochemical sensors. This work describes a simplified and novel bottom-up fabrication approach for BDD-based three-electrode sensor chips utilizing direct...
journal article 2023
document
van Essen, S.M. (author), Scharnke, Jule (author), Seyffert, Harleigh C. (author)
For the design of maritime structures in waves, the extreme values of responses such as motions and wave impact loads are required. Waves and wave-induced responses are stochastic, so such responses should always be related to a probability. This information is not easy to obtain for strongly non-linear responses such as wave impact forces....
journal article 2023
document
Chen, Chen (author), Qiao, Tiezhu (author), Pang, Y. (author), Hao, Guirong (author)
In the process of industrial production of sapphire crystals, the seeding step plays a vital role. Seeding needs to be performed under conditions where the temperature gradient is small and the temperature distribution tends to be stable. At present, the industrial production of sapphire mainly relies on manual experience to control the seed...
journal article 2022
document
Cap, Stephanie (author), Bots, P.W.G. (author), Scherer, Laura (author)
Nuts are considered an important protein source in sustainable dietary patterns but are seldom studied in detail. Here a multi-criteria decision analysis was used to rank 10 nuts and seeds against 11 environmental, nutritional, and social criteria and provide greater insight into the sustainability impacts of this food group. Weights were...
journal article 2022
document
Rhijnsburger, Lars (author)
Fuzzing in Big Data applications is a relatively new field which is still lacking effective tools to support automated testing. Recently, a framework called BigFuzz was published which made fuzz testing for big data systems feasible. But there was no solution to work with Big Data programs that use JSON typed data. Big Data systems often make...
bachelor thesis 2021
document
Rietveld, Erwin (author)
The constantly growing world population has en ever-increasing food supply demand. With the decreasing quality of available agricultural land, innovations in the agricultural sector will play an increasingly crucial role. Increasing productivity, improving quality and increasing the nutritional values of the end products are key in combating the...
master thesis 2021
document
Derakhshanfar, P. (author), Devroey, Xavier (author), Perrouin, Gilles (author), Zaidman, A.E. (author), van Deursen, A. (author)
This is an extended abstract of the article: Pouria Derakhshanfar, Xavier Devroey, Gilles Perrouin, Andy Zaidman and Arie van Deursen. 2019. Search-based crash reproduction using behavioural model seeding. In: Software Testing, Verification and Reliability (May 2020). http://doi.org/10.1002/stvr.1733.
conference paper 2021
document
Brocken, Bob (author)
Boron-doped diamond (BDD) is an attractive electrode material. When sufficiently boron-doped, diamond has metal-like conductivity and in comparison with other electrode materials has several advantages, such as lowand stable background current, reduced biofouling, broad potentialwindow, corrosion resistance and chemical stability. However,...
master thesis 2020
document
Olsthoorn, Mitchell (author), Derakhshanfar, P. (author), Devroey, Xavier (author)
Model seeding is a strategy for injecting additional information in a search-based test generation process in the form of models, representing usages of the classes of the software under test. These models are used during the search-process to generate logical sequences of calls whenever an instance of a specific class is required. Model seeding...
conference paper 2020
document
de Vries, Chiel (author)
To validate the quality of software, test cases are used. These test cases are often manually-written, which is labor-intensive. To avoid this problem, automated software testing was invented. Search-based software testing is a useful tool for developers to automatically generate test cases. However, improvements are still needed to create test...
bachelor thesis 2020
document
van den Bos, L.M.M. (author), Bierbooms, W.A.A.M. (author), Alexandre, Armando (author), Sanderse, Benjamin (author), van Bussel, G.J.W. (author)
A novel approach is proposed to reduce, compared with the conventional binning approach, the large number of aeroelastic code evaluations that are necessary to obtain equivalent loads acting on wind turbines. These loads describe the effect of long-term environmental variability on the fatigue loads of a horizontal-axis wind turbine. In...
journal article 2020
document
Derakhshanfar, P. (author), Devroey, Xavier (author), Perrouin, Gilles (author), Zaidman, A.E. (author), van Deursen, A. (author)
Search-based crash reproduction approaches assist developers during debugging by generating a test case, which reproduces a crash given its stack trace. One of the fundamental steps of this approach is creating objects needed to trigger the crash. One way to overcome this limitation is seeding: using information about the application during the...
journal article 2020
document
Ahmed, N. (author), Bertels, K.L.M. (author), Al-Ars, Z. (author)
The seeding heuristic is widely used in many DNA analysis applications to speed up the analysis time. In many applications, seeding takes a substantial amount of the total execution time. In this paper, we present an efficient GPU implementation for computing maximal exact matching (MEM) seeds in long DNA reads. We applied various...
conference paper 2020
document
Frota Sartori, A. (author), Belardinelli, P. (author), Dolleman, R.J. (author), Steeneken, P.G. (author), Ghatkesar, M.K. (author), Buijnsters, J.G. (author)
Diamond is a highly desirable material for state-of-the-art micro-electromechanical (MEMS) devices, radio-frequency filters and mass sensors, due to its extreme properties and robustness. However, the fabrication/integration of diamond structures into Si-based components remain costly and complex. In this work, a lithography-free, low-cost...
journal article 2019
document
van Regteren, Marin (author), Colosimo, I. (author), de Vries, Pepijn (author), van Puijenbroek, Marinka Elisabeth Barbara (author), Freij, Victor Sebastiaan (author), Baptist, Martin Josephus (author), Elschot, Kelly (author)
Coastal systems worldwide deliver vital ecosystem services, such as biodiversity, carbon sequestration, and coastal protection. Effectivity of these ecosystem services increases when vegetation is present. Understanding the mechanisms behind vegetation establishment in bio-geomorphic systems is necessary to understand their ability to recover...
journal article 2019
Searched for: subject%3A%22Seed%22
(1 - 20 of 36)

Pages