Searched for: subject%3A%22Silicon%255C+carbide%22
(21 - 40 of 70)

Pages

document
Marting, Louis (author)
Terahertz astronomy has been exceptionally unexplored until the last decades due to a technological gap, but exactly at these wavelengths the most distant galaxies appear very bright. Efficient instruments that are capable of spectrometry are essential in understanding the physics of these distant objects. Within the framework of this thesis, an...
master thesis 2022
document
Böcher, Catrin (author)
Transitioning of energy intensive industries (EIIs) towards more sustainability forms an important building block in achieving the Paris climate goals. Silicon carbide (SiC) production is such an EII, though it has not yet received much attention in systemic research. This thesis attempts to fill this gap by studying how SiC flows through the...
master thesis 2022
document
Romijn, J. (author), Vollebregt, S. (author), Middelburg, L.M. (author), el Mansouri, B. (author), van Zeijl, H.W. (author), May, Alexander (author), Erlbacher, Tobias (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
The wide bandgap of silicon carbide (SiC) has attracted a large interest over the past years in many research fields, such as power electronics, high operation temperature circuits, harsh environmental sensing, and more. To facilitate research on complex integrated SiC circuits, ensure reproducibility, and cut down cost, the availability of a...
journal article 2022
document
Chen, M. (author), Heijman, Sebastiaan (author), Luiten-Olieman, Mieke W.J. (author), Rietveld, L.C. (author)
Ceramic membranes have drawn increasing attention in oily wastewater treatment as an alternative to their traditional polymeric counterparts, yet persistent membrane fouling is still one of the largest challenges. Particularly, little is known about ceramic membrane fouling by oil-in-water (O/W) emulsions in constant flux filtration modes. In...
journal article 2022
document
Romijn, J. (author), Vollebregt, S. (author), May, Alexander (author), Erlbacher, Tobias (author), van Zeijl, H.W. (author), Leijtens, J.A.P. (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
In this paper, we present a quadrant sun position sensor microsystem device in a silicon carbide technology that operates in a field-of-view of ±33° and reaches a mean error of 1.9° in this range. This will allow, for the first time, an inherently visible blind sun position sensor in a CMOS compatible technology. Opto-electronic integration of...
conference paper 2022
document
Yu, G. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
This paper presents the semiconductor losses analytical equations in closed form for two-level voltage source converter, three-level neutral point clamped (NPC) and three-level T-Type PFC topologies in high power applications. The reverse parallel current conduction between the SiC MOSFETs channel and body diode is considered. A circuit...
conference paper 2022
document
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Zhu, G. (author), Yao, Y. (author), Bauer, P. (author)
This article introduces a three-mode variable-frequency zero-voltage switching (ZVS) modulation method for the four-switch buck+boost converter. This method makes this circuit concept well suited for applications, such as wireless power charging of electric vehicles, where this circuit operates as a power buffer between the resonant converter...
journal article 2022
document
Doust Mohammadi, Mohsen (author), Abdullah, Hewa Y. (author), Bhowmick, Somnath (author), Biskos, G. (author)
The ability of carbon- and silicon-based nanotubes, including pure carbon, silicon carbide, and Ge-doped silicon carbide nanotubes (CNT, SiCNT, SiCGeNT, respectively), for sensing highly toxic dichlorosilane (H2SiCl2) are investigated using quantum chemistry calculations. The intermolecular interactions between the sensing material and the gas...
journal article 2022
document
Ammerlaan, Tim (author)
Lithium-ion batteries are currently most commonly used in most electronic devices. These batteries are used because of their superiority in gravimetric energy and cyclability compared to other battery technologies. The most common anode used in lithium-ion batteries is currently graphite. Graphite has proven to be a very stable cycling material....
master thesis 2021
document
SHANKAR, SHREYAS (author)
Silicon-based MEMS technology has been the standard for developing 2D and 3D<br/>micro-structures for many years. There are 2 main classifications of MEMS manufacturing technologies, viz. bulk micro-machining, and surface micro-machining.<br/>These techniques have its own set of drawbacks. Bulk micro-machining affects the structural integrity of...
master thesis 2021
document
Qin, Guangze (author)
Colloidal fouling has attracted increasing interest in the membrane field. Oil and water (O/W) emulsion droplet and Extracellular polymeric substance (EPS) are significant colloids in produced water and surface water, respectively. Oily wastewater is produced in many industrial processes such as oil and gas extraction processes, and can take a...
master thesis 2021
document
Mathew, Philip (author)
The ambitious transition towards a renewable future is being made possible by power electronic systems that facilitate effective control and efficient conversion of energy. One such system is the solid-state transformer (SST) which aims to replace conventional transformers by offering larger energy densities and flexible...
master thesis 2021
document
Qian, Yichen (author), Hou, F. (author), Fan, J. (author), Lv, Quanya (author), Fan, X. (author), Zhang, Kouchi (author)
A new panel-level silicon carbide (SiC) metal oxide semiconductor field effect transistor (MOSFET) power module was developed by using the fan-out and embedded chip technologies. To achieve the more effective thermal management and higher reliability under thermal cycling, a new optimization method called Ant colony optimization-back...
journal article 2021
document
Mohammadi, Mohsen Doust (author), Abdullah, Hewa Y. (author), Biskos, G. (author), Bhowmick, Somnath (author)
We have investigated the possibility of utilizing various single-walled pristine and doped carbon nanotubes as adsorbents for the 1-chloro-1,2,2,2-tetrafluoroethane (HCFC-124) gaseous molecule. Three candidates, including pristine carbon nanotube (CNT), silicon carbide nanotube (SiCNT) and germanium-doped SiCNT (SiCGeNT) are identified and...
journal article 2021
document
Romijn, J. (author), Middelburg, L.M. (author), Vollebregt, S. (author), el Mansouri, B. (author), van Zeijl, H.W. (author), May, Alexander (author), Erlbacher, Tobias (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
Accurately sensing the temperature in silicon carbide (power) devices is of great importance to their reliable operation. Here, temperature sensors by resistive and CMOS structures are fabricated and characterized in an open silicon carbide CMOS technology. Over a range of 25-200°C, doped design layers have negative temperature coefficients of...
conference paper 2021
document
Tan, Changyu (author), Stecca, M. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)
The parallel connection of a Silicon (Si)-based IGBT and a Silicon Carbide (SiC)-based MOSFET forming a so called hybrid switch (HyS) can be used to exploit the advantageous features of both semiconductor and materials technologies. In this paper, a HyS-based inverter designed for the application of Electric Vehicle (EV) traction is compared to...
conference paper 2021
document
Mo, J. (author), Middelburg, L.M. (author), Morana, B. (author), van Zeijl, H.W. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
The application of pressure sensors in harsh environments is typically hindered by the stability of the material over long periods of time. This work focuses on the design and fabrication of surface micromachined Pirani gauges which are designed to be compatible with state-of-the-art Silicon Carbide CMOS technology. Such an integrated...
journal article 2021
document
Middelburg, L.M. (author)
doctoral thesis 2020
document
Hou, F. (author), Wang, Qidong (author), Chen, Min (author), Zhang, Kouchi (author), Ferreira, Jan Abraham (author), Wang, Wenbo (author), Ma, R. (author), Su, Meiying (author), Song, Yang (author)
In this article, a novel fan-out panel-level printed circuit board (PCB)-embedded package for phase-leg silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module is presented. Electro-thermo-mechanical co-design was conducted, and the maximum package parasitic inductance was found to be about 1.24 nH at 100...
journal article 2020
document
Middelburg, L.M. (author), van Zeijl, H.W. (author), Vollebregt, S. (author), Morana, B. (author), Zhang, Kouchi (author)
This work focusses on the design and fabrication of surface micromachined pressure sensors, designed in a modular way for the integration with analog front-end read-out electronics. Polycrystalline 3C silicon carbide (SiC) was used to fabricate free-standing high topography cavities exploiting surface micromaching. The poly-SiC was in-situ...
journal article 2020
Searched for: subject%3A%22Silicon%255C+carbide%22
(21 - 40 of 70)

Pages