- document
-
Koel, Lars (author)A Helically wrapped structure is a hollow pipe structure that is made from a metal strip and the overlapping interfaces are adhesively joined. It is yet unknown how to determine the quasi-static strength and predict the fatigue life of this structure. A method was developed to determine whether either the adherend or the adhesive is critical to...master thesis 2023
- document
-
Bölger, Matthijs (author)Stability assessment for dikes and dike reinforcement requires insight in soil strength behaviour. The required parameters for this assessment are typically obtained from conventional laboratory tests. These conventional tests are not performed under conditions found in the field. For example, a dike section resembles to plane strain conditions....master thesis 2023
- document
-
Wang, X. (author)In this thesis, fibre optic sensing has been investigated as an important technique for structural health monitoring. Distributed fibre optic sensing based on Rayleigh scattering is a fibre optic sensing technique to achieve the spatially continuous strain monitoring for critical locations for the structures. However, the Rayleigh backscattering...doctoral thesis 2023
- document
-
Bouman, Niels (author)Two-dimensional (membrane) materials have been receiving much scientific attention due to their unique material properties that can be used to study the smallest physical phenomena. One such material is graphene, perceived as the holy grail in material physics, due to its unique material properties. Its aspect ratio diminishes the bending...master thesis 2023
- document
-
Westerbeek, Elise (author)Strain hardening cementitious composites (SHCC) can be used to reduce the amount of reinforcement needed to control crack widths. SHCC has a strain hardening behaviour with dense micro-cracking, which makes it more ductile compared to conventional concrete. Conventional concrete can be used in the non-critical locations. An interface is formed...master thesis 2023
- document
-
de Rooij, Rens (author)This research presents a measurement method for a compliant gripper finger, whereby the location of the contact with an object and the exerted grasp force are measured indirectly, instead of directly on the contacting surface. For this purpose, the deformation is measured using strain gauges at two locations on the inside structure of the finger...master thesis 2023
- document
-
Konstadinou, M. (author), Herrier, G. (author), Stoutjesdijk, T. (author), Losma, F. (author), Zwanenburg, C. (author), Dobbe, R. (author)This study aimed to assess the suitability of lime treatment for use in dikes in the Netherlands. The effect of this technique on the behavior of a Dutch clay was addressed by comparing the detailed response of lime-treated and natural samples at different lime contents (1.25% and 2.25%) and curing periods. A series of laboratory tests...journal article 2023
- document
-
Corley-Wiciak, Cedric (author), Richter, Carsten (author), Zoellner, Marvin H. (author), Zaitsev, Ignatii (author), Manganelli, Costanza L. (author), Hendrickx, N.W. (author), Sammak, A. (author), Veldhorst, M. (author), Scappucci, G. (author)A strained Ge quantum well, grown on a SiGe/Si virtual substrate and hosting two electrostatically defined hole spin qubits, is nondestructively investigated by synchrotron-based scanning X-ray diffraction microscopy to determine all its Bravais lattice parameters. This allows rendering the three-dimensional spatial dependence of the six...journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)In this study, an experimental setup to characterize the early-age creep of 3D printable mortar was proposed. The testing protocol comprises quasi-static compressive loading-unloading cycles, with 180-s holding periods in between. An analytical model based on a double power law was used to predict creep compliance with hardening time and...journal article 2023
- document
-
Lescur, Amke (author), Stergar, Erich (author), Lim, Jun (author), Hertelé, Stijn (author), Petrov, R.H. (author)Austenitic stainless steels similar to type AISI 316L are widely used structural materials in current and future nuclear reactors. Careful development and characterization of these materials and their welds is needed to verify the structural integrity of large-scale multicomponent structures. Understanding the local deformation behavior in...journal article 2023
- document
-
Civiero, R. (author), Perez-Rafols, F. (author), Nicola, L. (author)The effect of the presence of a passivation layer on a metal rough surface during contact loading is investigated by means of dislocation dynamics simulations. The metal body is modeled as an FCC single crystal with a self-affine rough surface that is either bare, or covered by a thin coating, impenetrable to dislocations. This analysis...journal article 2023
- document
-
van Dokkum, J.S. (author), Bos, Cornelis (author), Offerman, S.E. (author), Sietsma, J. (author)Modelling dislocation glide over the initial part of a stress–strain curve of metals received little attention up to now. However, dislocation glide is essential to ones understanding of the fundamental relationship between inelastic deformation and the evolution of the dislocation network structure. Therefore, we present a model of...journal article 2023
- document
-
Cui, Z. (author), Fan, X. (author), Zhang, Y. (author), Vollebregt, S. (author), Fan, J. (author), Zhang, Kouchi (author)This paper presented integrated electromigration (EM) studies through experiment, theory, and simulation. First, extensive EM tests were performed using Blech and standard wafer-level electromigration acceleration test (SWEAT)-like structures, which were fabricated on four-inch wafers. Second, a molecular dynamics (MD) simulation-based...journal article 2023
- document
-
Offerman, Maurice (author)Bipolar half plates (BPPs) are important parts of Proton Exchange Membrane (PEM) hydrogen fuel cells. Metallic BPPs are generally produced by stamping or hydro forming. However, these processes are not continuous and relatively slow compared to rotary forming. Rotary forming is a continuous process and could potentially be a faster BPP...master thesis 2022
- document
-
Zhang, S. (author)Alkali-activated Materials (AAMs), including those classified as geopolymer, are obtained through the reaction between a solid precursor and an alkaline solution. Compared with ordinary Portland cement (OPC) binders, these materials maintain comparable mechanical properties but have the advantage of reducing greenhouse gas emissions and...doctoral thesis 2022
- document
-
Arens, Patricia (author)In the last decades there has been an increasing interest in computing the local strain at the atomic scale of materials. By knowing aspects of the local strain in a lattice, one has information about measurements of distortions of lattice parameters concerning shifts, deformations and defects computed with respect to a smooth, defect-free...bachelor thesis 2022
- document
-
Nazeer, N. (author)The aerospace industry is an ever-evolving field that has seen many technological advances over the past decades. The desire for aircraft to be not only efficient and reliable but also cheaper and safer has brought about many proposals across the industry. One of these advances is towards morphing aircraft wings to make wings lighter, more...doctoral thesis 2022
- document
-
Eijs, Isa (author)Combining the high strength of Ultra High Performance Concrete (UHPC) and the strain capacity of Strain Hardening Cementitious Composites (SHCC), Strain Hardening Ultra High Performance Fibre Reinforced Concrete (SHUHPFRC) could be a promising material for the application of strengthening RC elements. This research describes the development of...master thesis 2022
- document
-
Huang, Stephen (author)Distance learning brings all sorts of advantages. The ability to follow lectures at home can save people transportation costs and time. Teaching through videoconferencing software such as Zoom is one of the methods to learn remotely. To explore new and better teaching methods, the possibility of using a telepresence robot is investigated. To...bachelor thesis 2022
- document
-
Arya, Himani (author)In recent years, distributed fiber optic sensing (DFOS) technology has been widely used in monitoring the strains developed in the structures.<br/>The main focus of this report is to identify strains distribution while hammering/<br/>jacking pile and analyzing the uncertainties between the theoretical, measured strain through datalogger in...student report 2022