- document
-
Giagnorio, Mattia (author), Tanis, M.B. (author), Hélix-Nielsen, Claus (author), Aschmoneit, Fynn Jerome (author)In forward osmosis, defects on the selective active layer and changes in the porous structure of the support layer can be detrimental factors affecting the membrane performance. This study focuses on the impacts of (i) the possible presence of defects and (ii) the changes in pore structures on the water flux and membrane selectivity via...journal article 2023
- document
-
Castellino, Francesco (author)One of the main cost drivers of an offshore wind power plant are the support structures of the wind turbines, it is therefore of primary importance to optimize their design. Among the support structures available, the concept most widely adopted is the monopile-based support structure, whose design is often fatigue-driven. Offshore structures...master thesis 2022
- document
-
Braun, Moritz (author), Dörner, Alfons (author), ter Veer, Kane F. (author), Willems, Tom (author), Seidel, Marc (author), Hendrikse, H. (author), Høyland, Knut V. (author), Fischer, Claas (author), Ehlers, Sören (author)Fixed offshore wind turbines continue to be developed for high latitude areas where not only wind and wave loads need to be considered but also moving sea ice. Current rules and regulations for the design of fixed offshore structures in ice-covered waters do not adequately consider the effects of ice loading and its stochastic nature on the...journal article 2022
- document
-
Davenne, Niels (author)Multi-material 3D inkjet printing has great potential for rapid prototyping and manufacturing of functional mesoscale structures when novel inks are combined into a fully integrated AM-process. This process can be faster and cheaper than conventional methods to produce functional structures. Research is conducted on a large range of potentially...master thesis 2021
- document
-
Huinink, Cis (author)Offshore wind electricity generation will play a key role in the transition to a sustainable energy sector. In 2020, the European Commission presented their Offshore Renewable Energy Strategy which includes 300 GW of offshore wind capacity by 2050 (European Commission, 2020). This research focusses on the steel mass development of OWT structural...master thesis 2021
- document
-
van der Male, P. (author)In the previous decade, offshore wind undeniably took off as an important player in the European energymarket, which resulted in continuously enhancing turbine sizes and foundation structures pushing the boundaries of engineering, with the purpose of minimizing the levelized cost of energy to the range of optimal competitiveness. Regarding the...doctoral thesis 2021
- document
-
Markolefas, Panagiotis (author)The preliminary design of wind turbine support structures within an offshore wind farm plays a significant role in decreasing the costs involved and is pivotal in establishing the wind sector as a leading contributor towards a sustainable future. During the early design stages, the optimization of structural dimensions, which involves a large...master thesis 2020
- document
-
Broersen, Tijn (author)The number of offshore wind farms is growing rapidly, which increases the likelihood of ship collisions with offshore wind turbines. Additionally, the cost of energy reduction for wind turbines is achieved due to radical design optimizations. Therefore, simple methods should be obtained to determine the offshore wind turbine response during ship...master thesis 2020
- document
-
Feys, Andreas (author)This thesis presents the potential of solar energy to answer the increasing demand for sustainable energy. Multiple floating solar parks are installed on inland water bodies. This trend is a result of the lack of surface for PV systems and a result of legislation on national and international governmental levels, for the reduction of greenhouse...master thesis 2020
- document
-
van der Male, P. (author), Vergassola, M. (author), van Dalen, K.N. (author)To meet the political goals regarding renewable energy production, offshore wind keeps expanding to waters with larger depths and harsher conditions, while the turbine size continues to grow and ever-larger foundation structures are required. This development can only be successful if further cuts in the levelized cost of energy are established....review 2020
- document
-
van der Linden, Lars (author)The offshore wind energy market is highly dynamic and one of the major challenges is to become more cost competitive against other sources of energy. The support structure of an offshore wind turbine shows a high potential for further cost reduction. Jules Dock is investigating in the replacement of a steel tower on a monopile foundation by a...master thesis 2019
- document
-
van Wingerden, Wouter (author)Contrary to a one-off jacket installation where a contractor can wait for favourable weather conditions, the installation of support structures for offshore wind turbines is of repetitive nature. This repetitive nature leads to a need for a better understanding of the behaviour during installation of various jacket geometries. This need brings...master thesis 2019
- document
-
Tofik, Halsho (author)Offshore wind turbines (OWTs), together with their support structures, are designed for an operational period of 20 years. The first generation of these offshore wind turbines has already reached or is approaching their designed lifetime of 20 years. Depending on the legislation and the governmental subsidies, a decision needs to be made about...master thesis 2019
- document
-
Langelaar, M. (author)Purpose: The purpose of this paper is to communicate a method to perform simultaneous topology optimization of component and support structures considering typical metal additive manufacturing (AM) restrictions and post-print machining requirements. Design/methodology/approach: An integrated topology optimization is proposed using two density...journal article 2019
- document
-
Krikken, André (author)The thesis discusses the design of the secondary mirror support structure for the deployable space telescope. In the thesis the entire support system is considered, including system layout and mirror interface. A selection of hinge concepts were identified and final concepts were selected in trade-offs. The mid hinge was selected to be an...master thesis 2018
- document
-
Pereyra, Brandon (author)New floating wind turbine designs are needed to reduce production costs and to increase mass production feasibility. The TetraSpar floating wind turbine achieves these goals by being constructed using components highly suitable for standardization and industrialization. The design makes use of a suspended submerged counter weight to obtain a low...master thesis 2018
- document
-
Dai, C. (author), Wang, C.C. (author), Wu, Chenming (author), Lefebre, Sylvain (author), Fang, G. (author), Liu, Yong-Jin (author)This paper presents a new method to fabricate 3D models on a robotic printing system equipped with multi-axis motion. Materials are accumulated inside the volume along curved tool-paths so that the need of supporting structures can be tremendously reduced - if not completely abandoned - on all models. Our strategy to tackle the challenge of...journal article 2018
- document
-
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...journal article 2018
- document
-
Langelaar, M. (author)Additive manufacturing (AM) enables the fabrication of parts of unprecedented complexity. Dedicated topology optimization approaches, that account for specific AM restrictions, are instrumental in fully exploiting this capability. In popular powder-bed-based AM processes, the critical overhang angle of downward facing surfaces limits...journal article 2018
- document
-
van den Bosch, Joost (author)Currently, the foundation design of offshore wind turbines is based on a simple cantilever beam model with a mass representing the rotor and nacelle, or by making use of wind turbine simulation software such as Bladed, which are built for rotor design. The simple models are unrealistic since the dynamic interaction between the aerodynamic loads,...master thesis 2017