Searched for: subject:"TIN"
(1 - 15 of 15)
document
Kavisha, K. (author), Ledoux, H. (author), Stoter, J.E. (author)
Point cloud data are an important source for 3D geoinformation. Modern day 3D data acquisition and processing techniques such as airborne laser scanning and multi-beam echosounding generate billions of 3D points for simply an area of few square kilometers. With the size of the point clouds exceeding the billion mark for even a small area,...
conference paper 2016
document
Kavisha, K. (author), Ledoux, H. (author), Stoter, J.E. (author)
In addition to buildings, the terrain forms an important part of a 3D city model. Although in GIS terrains are usually represented with 2D grids, TINs are also increasingly being used in practice. One example is 3DTOP10NL, the 3D city model covering the whole of the Netherlands, which stores the relief with a constrained TIN containing more than...
conference paper 2016
document
Coumou, P.C.J.J. (author)
Thin films of superconducting materials with a high resistance in the normal state, such as TiN, NbTiN, NbN and InO, are intensively studied from both an application and a fundamental point of view. A spatially inhomogeneous superconducting state can arise in these materials as a result of the strong disorder. This Thesis provides an...
doctoral thesis 2015
document
Leon-Garcia, O. (author)
doctoral thesis 2013
document
Lesparre, J. (author), Gorte, B.G.H. (author)
Aerial laser scan data is widely used to produce 2½D digital elevation models automatically. However, creating full 3D city models from this data is a complex task. A simplified 3D model, like a 2½D model with vertical walls will be easier to produce automatically, especially when the model is not produced to look nice, but just to give...
conference paper 2012
document
Gorte, B.G.H. (author), Lesparre, J. (author)
Point clouds obtained by aerial laser scanning are a convenient input source for high resolution 2.5d elevation models, such as the Dutch AHN-2. More challenging is the fully automatic reconstruction of 3d city models. An actual demand for a combined 2.5d terrain and 3d city model for an urban hydrology application led to the design of an...
conference paper 2012
document
Ghawana, T. (author), Zlatanova, S. (author)
GIS is changing rapidly its face with the advancement of computing technologies. From merely a 2D representation of real world features, it is moving to present more and more applications in 3D formats. Today 3D GIS is an essential way of handling the spatial data in urban planning. In cities where every inch of land is measured and is consumed...
journal article 2010
document
Machunze, R. (author)
Thin metal nitride films deposited by Physical Vapor Deposition (PVD) are used amongst many other applications as wear protective coatings in tool industry or as diffusion barriers in integrated circuit technology. Typically these films exhibit a residual in-plane stress when deposited onto rigid substrates such as silicon wafers or cutting...
doctoral thesis 2010
document
Castaldo, V. (author), Hagen, C.W. (author), Kruit, P. (author), Van Veldhoven, E. (author), Maas, D. (author)
The determination of the quality of an imaging system is not an easy task for, in general, at least three parameters, strictly interdependent, concur in defining it: resolution, contrast, and signal-to-noise ratio. The definition of resolution itself in scanning microscopy is elusive and the case of scanning ion microscopy is complicated by the...
journal article 2009
document
Simonin, L. (author)
The growing interest during the past decades for mobile devices, like laptops, cellular phones, MP3 players, etc., is impressive. moreover, the concerns about climate changes have increased the worldwide interest for electrical and hybrid vehicles and intermittent sustainable energies, like solar and wind energy. These development have...
doctoral thesis 2009
document
Faradzhev, N. (author), Sidorkin, V. (author)
The authors report on the interaction of atomic hydrogen with Sn and thin Ru film at room temperature. The study is done using a combination of photoelectron and low energy ion scattering spectroscopies as well as scanning electron microscopy. The adsorption of hydrogen on a Sn surface leads to the formation of stannane (SnH4), which...
journal article 2009
document
Castaldo, V. (author), Hagen, C.W. (author), Rieger, B. (author), Kruit, P. (author)
In principle, a scanning ion microscope can produce smaller probe sizes than a scanning electron microscope because the diffraction contribution is smaller. However, the imaging resolution is often severely limited by the sputtering damage. In this article, an experimental procedure to establish the limit of a focused ion beam system for imaging...
journal article 2008
document
Barends, R. (author), Hortensius, H.L. (author), Zijlstra, T. (author), Baselmans, J.J.A. (author), Yates, S.J.C. (author), Gao, J.R. (author), Klapwijk, T.M. (author)
We study NbTiN resonators by measurements of the temperature dependent resonance frequency and frequency noise. Additionally, resonators are studied covered with SiOx dielectric layers of various thicknesses. The resonance frequency develops a nonmonotonic temperature dependence with increasing SiOx layer thickness. The increase in the noise is...
journal article 2008
document
Ghatak, K.P. (author), Bhattacharya, S. (author), Bhowmik, S. (author), Benedictus, R. (author), Choudhury, S. (author)
We study thermoelectric power under strong magnetic field (TPM) in carbon nanotubes (CNTs) and quantum wires (QWs) of nonlinear optical, optoelectronic, and related materials. The corresponding results for QWs of III-V, ternary, and quaternary compounds form a special case of our generalized analysis. The TPM has also been investigated in QWs of...
journal article 2008
document
Boschloo, G.K. (author), Goossens, A. (author), Schoonman, J. (author)
journal article 1997
Searched for: subject:"TIN"
(1 - 15 of 15)