Searched for: subject%3A%22Voxelization%22
(1 - 20 of 46)

Pages

document
Khan, Afaq (author)
The mechanical failure of a temporomandibular joint (TMJ) replacement system can stem from various factors, with one notable cause being the unnatural kinematics and loading observed in prosthetic joint function. Given that,. the primary objective of the study was to investigate whether including functionally graded materials (FGMs) at the site...
master thesis 2023
document
Quintana Arntz, Vicente (author)
This research project delves into the potentials of material jetting printing through an exploration of voxel printing techniques that integrate solids and liquids. The focus centers on assessing the shock absorption (SA) capabilities of diverse samples incorporating varying materials and printing patterns. The key materials employed in this...
master thesis 2023
document
Reinoso Hayashi, Yuka (author)
Eighty percent of women after mastectomy wear an external breast prosthesis either permanently or during the period before breast reconstruction. External breast prostheses replace the removed breast and aim to recreate the original body shape. However, while each woman has a different chest wall and scar topology, most commonly used are...
master thesis 2023
document
Kuijpers, Mika (author)
Voxels are cells on a 3D regular grid. Voxel-based scenes have many applications, including frequent use in simulations or games. Over the years, the field of high-resolution voxel scenes has progressed significantly, allowing for compressing and real-time editing of high-resolution scenes. This possibility of editing high-resolution scenes led...
master thesis 2023
document
Schumann, Tim (author)
One million homes will be needed in the Netherlands by 2030. Prefabrication in the construction industry can contribute to construct affordable houses, but that results often in standardized and not customized designs. These repetitive designs can be overcome through the introduction of mass-customization in architecture. Computational...
master thesis 2023
document
Cruz Saldivar, M. (author), Veeger, Robin Petrus Elias (author), Tay, E.T.W.S. (author), Fenu, M. (author), Klimopoulou, M. (author), van Osch, G.J.V.M. (author), Fratila-Apachitei, E.L. (author), Doubrovski, E.L. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)
Living organisms use functional gradients (FGs) to interface hard and soft materials (e.g., bone and tendon), a strategy with engineering potential. Past attempts involving hard (or soft) phase ratio variation have led to mechanical property inaccuracies because of microscale-material macroscale-property nonlinearity. This study examines 3D...
journal article 2023
document
Biront, Andreas (author)
We explain the design and analysis of a novel voxel design with the goal of reducing assembly time and complexity of the robot-material system. Recent advances in robot-material systems, on the other hand, have focused on mechanical properties, design, and production methods. Making it possible to create cellular structures in harsh and remote...
master thesis 2022
document
Park, kyu (author)
The demand for lower construction costs comes at the price of duplicating architectural designs. As a result, the misperception that modular architecture is repetitive prevails. However, the developments in computational design and MMC (modern methods of construction) can suggest a standardized manufacturing approach to provide mass...
master thesis 2022
document
de Jong, Michiel (author)
In the modern world, evacuating a building in a safe and orderly manner remains a challenge. Fire-based emergencies in a building are dynamic environments that can be simulated to better understand, analyse, and contribute to safer and smarter buildings. While different spatial representations exist, <i>voxels</i> provide a structured, flexible...
master thesis 2022
document
Peng, Y. (author), Nijhuis, S. (author), Zhang, Guangting (author), Stoter, J.E. (author), Agugiaro, G. (author)
This paper focuses on GIS-based visibility analysis to explore landscape architecture com-positions as a means to understand visual-spatial characteristics and identify related design principles. More specifically, the paper elaborates a practical method to employ high-resolution data acquired by terrestrial LiDAR (Light Detection and Ranging or...
journal article 2022
document
Cruz Saldivar, M. (author), Doubrovski, E.L. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)
Bio-inspired composites are a great promise for mimicking the extraordinary and highly efficient properties of natural materials. Recent developments in voxel-by-voxel 3D printing have enabled extreme levels of control over the material deposition, yielding complex micro-architected materials. However, design complexity, very large degrees of...
journal article 2022
document
Truong-Hong, Linh (author), Lindenbergh, R.C. (author), Vermeij, M. J. (author)
Current mobile systems are capable of efficiently acquiring dense urban point clouds. Still, operational use of such data is hampered by the lack of efficient object extraction methodology. Notably methodology is lacking for automatically extracting objects that do not belong to the road furniture like street signs and light poles but do...
journal article 2022
document
Veeger, Robin (author)
Functional gradients in hard-soft interfaces are abundant in nature, and we often mimic them to create strong and tough composites. A powerful tool for the designs and fabrication of biomimetic composites is voxel-based multi-material 3D printing. Earlier researches mainly focused on using this technique in the creation of gradients based on...
master thesis 2021
document
Haji Aghajany, S. (author), Amerian, Yazdan (author), Verhagen, S. (author), Rohm, Witold (author), Schuh, Harald (author)
Tropospheric wet delay, the main source of which is water vapor, is one of the major factors affecting the accuracy of positioning techniques using microwave. Tropospheric tomography is a powerful method to reconstruct the water vapor content in four-dimensional (4D) space. This paper studies the effect of using function-based and voxel-based...
journal article 2021
document
Alexandridis, Vasileios (author)
Bathymetric Airborne LiDAR technology is used to map the depth of water bodies. It uses a green light sensor which is able to penetrate the water surface and reach the bottom part of the interesting water areas. However, water conditions affect the capability of the green laser penetration. Factors such as the water clarity, the water turbidity ...
master thesis 2020
document
van der Velden, Gijs (author), Fan, D. (author), Staufer, U. (author)
Organ-on-chip (OoC) technology is increasingly used for biomedical research and to speed up the process of bringing a drug from lab to the market. The main fluidic components of an OoC device are microfluidic channels and porous membranes arranged in three dimensions. Current chips are often assembled from several parts. In the development...
journal article 2020
document
Haji Aghajany, S. (author), Amerian, Yazdan (author), Verhagen, S. (author), Rohm, Witold (author), Ma, H. (author)
The water vapor content in the atmosphere can be reconstructed using the all-weather condition troposphere tomography technique. In common troposphere tomography, the water vapor of each voxel is represented by an unknown parameter. This means that when the desired spatial resolution is high or study area is large, there will be a huge number of...
journal article 2020
document
Haji Aghajany, S. (author), Amerian, Yazdan (author), Verhagen, S. (author)
Tropospheric tomography is one of the most important techniques to reconstruct three-dimensional (3D) images of the tropospheric water vapor fields using a local GNSS network. In the conventional tropospheric tomography method, called voxel-based tropospheric tomography, the 3D space is divided into many voxels and the amount of water vapor...
journal article 2020
document
Alkadri, M.F. (author), De Luca, Francesco (author), Turrin, M. (author), Sariyildiz, I.S. (author)
This study proposes a voxel-based design approach based on the subtractive mechanism of shading envelopes and attributes information of point cloud data in tropical climates. In particular, the proposed method evaluates a volumetric sample of new buildings based on predefined shading performance criteria. With the support of geometric and...
journal article 2020
document
van der Laan, Remi (author)
Representing geometry data as voxels allows for a massive amount of detail that can be rendered in real-time. Storing this type of data as a directed acyclic graph (DAG) has recently led to immense improvements in memory consumption, which is one of the main limitations often associated with voxel-based approaches. We present a method for...
master thesis 2019
Searched for: subject%3A%22Voxelization%22
(1 - 20 of 46)

Pages