- document
- van-Herk, A. (author), Wesseling, P. (author) conference paper 1974
- document
-
De Winkel, G.D. (author)Semi-rigid connections between I-section beams and tubular columns can be used economically for buildings and offshore structures. The lack of stiffening plates allows the fabrication of these connections in a cost effective way. Furthermore, by taking into account the connection strength and stiffness, the connections are also economically in...doctoral thesis 1998
- document
-
Holm, S.R. (author)This thesis describes the derivation of an analytical model for the design and optimization of a permanent-magnet machine for use in an energy storage flywheel. A prototype of this flywheel is to be used as the peak-power unit in a hybrid electric city bus. The thesis starts by showing the feasibility of using a flywheel energy storage system...doctoral thesis 2003
- document
- Holm, S.R. (author), Polinder, H. (author), Ferreira, J.A. (author) journal article 2007
- document
-
Alles, J. (author), Mudde, R.F. (author)Polychromatic x-ray beams traveling though material are prone to beam hardening, i.e., the high energy part of the incident spectrum gets over represented when traveling farther into the material. This study discusses the concept of a mean attenuation coefficient in a formal way. The total energy fluence is one-to-one related to the traveled...journal article 2007
- document
-
Abreu, R.F. (author), Gonzalez, A. (author), Zoeteweij, P. (author), Van Gemund, A.J.C. (author)Preprint of paper published in: ENASE 2008 - Proceedings of the 3rd International Conference on Evaluation of Novel Approaches to Software Engineering, 4-7 May 2008 Fault screeners are simple software (or hardware) constructs that detect variable value errors based on unary invariant checking. In this paper we evaluate and compare the...report 2008
- document
- Talmon, A.M. (author) conference paper 2010
- document
-
Ashuri, T. (author), Van Bussel, G.J.W. (author), Zaayer, M.B. (author), Van Kuik, G.A.M. (author)A wind turbine blade has a complex shape and consists of different elements with dissimilar material properties. To do any aeroelastic simulation, the structural properties of the blade such as stiffnesses and mass per unit length should be known in advance, and extracting these properties is a difficult task. This paper presents an analytical...conference paper 2010
- document
-
Jia, L. (author), d' Acunto, L. (author), Meulpolder, M. (author), Pouwelse, J.A. (author), Epema, D.H.J. (author)Enhancing reciprocity has been one of the primary motivations for the design of incentive policies in BitTorrent-like P2P systems. Reciprocity implies that peers need to contribute their bandwidth to other peers if they want to receive bandwidth in return. However, the over-provisioning that characterizes today’s BitTorrent communities and the...conference paper 2011
- document
-
Jia, L. (author), Rahman, R (author), Vinko, T. (author), Pouwelse, J.A. (author), Epema, D.H.J. (author)Many private BitTorrent communities employ Sharing Ratio Enforcement (SRE) schemes to incentivize users to contribute their upload resources. It has been demonstrated that communities that use SRE are greatly oversupplied, i.e., they have much higher seeder-to-leecher ratios than communities in which SRE is not employed. The first order effect...conference paper 2011
- document
-
Lawson, C.R. (author)The paper details the role modelling (analytical, physical and numerical) has played in the development of design methods for basal reinforced piled embankments; specifically the level of embankment arching and the determination of the magnitude of the tensile loads in the basal reinforcement. The paper also reviews the major national design...conference paper 2012
- document
-
Vu Xuan, H. (author)In this thesis modeling, analysis, design and measurement of exterior rotor permanent magnet (PM) machines with concentrated windings are dealt with. Special attention is paid to slotting effect. The PM machine is integrated in flywheel and used for small-scale ship application. Analytical model and automated nonlinear transient finite-element...doctoral thesis 2012
- document
-
Farajzadeh, R. (author), Meulenbroek, B.J. (author), Daniel, D. (author), Riaz, A. (author), Bruining, J. (author)In this paper, we follow a similar procedure as proposed by Koval (SPE J 3(2):145–154, 1963) to analytically model CO2 transfer between the overriding carbon dioxide layer and the brine layer below it. We show that a very thin diffusive layer on top separates the interface from a gravitationally unstable convective flow layer below it. Flow in...journal article 2013
- document
-
Van Eekelen, S.J.M. (author), Bezuijen, A. (author), Van Tol, A.F. (author)Most analytical models for the design of piled embankments or load transfer platforms with geosynthetic reinforcement (GR) include two calculation steps. Step 1 calculates the arching behaviour in the fill and step 2 the load-deflection behaviour of the GR. A calculation method for step 2 based on the results of model tests has been published by...journal article 2013
- document
-
Janic, M. (author)This paper deals with the economic performances of supply chain(s) served by different including the mega freight transport vehicles. These performances are considered as a dimension of the supply chain’s sustainability together with the infrastructural, technical/technological, operational, environmental, and social performances. The supply...conference paper 2014
- document
-
Cai, H. (author), Toffolon, Marco (author), Savenije, Hubert (author)An analytical model is used to investigate the resonant behavior in a semi-closed channel. The main integral quantities of the tidal wave are obtained by means of a linearized one-dimensional model as a function of three dimensionless parameters, representing cross-section convergence, friction and distance to the closed boundary. Arbitrary...journal article 2016
- document
-
Gonçalves, Romulo (author), Zlatanova, S. (author), Kyzirakos, Kostis (author), Nourian, Pirouz (author), Alvanaki, Foteini (author), van Hage, Willem (author)3D digital city models form the basis for flow simulations (e.g. wind flow and water runoff), urban planning, underand over- ground formation analysis, and they are very important for automated anomaly detection on man made structures. They consist of large collections of semantically rich objects which have many properties such as material and...conference paper 2016
- document
-
Gupta, M. (author)Fibre-metal laminates (FMLs) have been studied intensively for the past three decades because of their enhanced fatigue properties compared to monolithic metals. Most of these studies have focused on the fatigue damage under in-axis loading. These studies led to the application of FMLs in the aircraft structure in the early 21st century. However...doctoral thesis 2017
- document
-
Yuan, K. (author), Knoop, V.L. (author), Hoogendoorn, S.P. (author)The capacity drop indicates that the queue discharge rate is lower than the free-flow capacity. Studies show that the queue discharge rate varies under different traffic conditions. Empirical data show that the queue discharge rate increases as the speed in congestion increases. Insights into the underlying behavioral mechanisms that cause...journal article 2017
- document
-
van der El, Kasper (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, Max (author)Due to linear perspective, the visual stimulus provided by a previewed reference trajectory reduces with increasing distance ahead. This paper investigates the effects of linear perspective on human use of preview in manual control tasks. Results of a human-in-the-loop tracking experiment are presented, where the linear perspective&#x0027...journal article 2018