Searched for: subject%3A%22breakwater%22
(1 - 20 of 39)

Pages

List view
Grid view
document
Ławniczak, Aron (author)
Coastal areas face increasing threat from erosion. The use of coastal protection structures is imperative to counter this. Concrete “armouring” is widely used due to durability and cost-effectiveness. Conventional methods of “armouring” result in habitat degradation and loss of biodiversity. ECOncrete developed Coastalock, an armour unit...
master thesis 2024
document
van Vliet, Lars (author)
The impact of climate change, particularly the rise in sea levels, obstructs the effectiveness of existing coastal structures. Additionally, climate change can also have an amplifying effect on wind speeds (Takagi & Esteban, 2013). Without proper control, the accumulation of changing environmental boundary conditions could lead to disastrous...
master thesis 2023
document
de Klerk, Geert (author), Stroeve, Axel (author), de Wit, Gillis (author), de Wit, Sam (author)
The Vietnamese Mekong Delta, a vital region in the country’s economy, faces the dual challenges of coastal erosion and mangrove degradation, which threaten its long-term sustainability and flood protection capabilities. This research focuses on the coastal area of the Bac Lieu province, characterized by severe erosion and degrading mangrove...
student report 2023
document
Teng, Djimin (author)
If sea level rises faster than anticipated in the initial design of rubble mound breakwaters, a serious threat is posed to their functionality. To limit wave overtopping, breakwaters must be adapted to the rising sea level and subsequent increase in wave loading due to reduced depth-induced wave breaking. However, the...
master thesis 2023
document
Gísladóttir, Lára (author)
Crownwalls are often placed on top of vertical composite breakwaters to reduce overtopping. Adding a seawards facing overhang at the top of crownwalls has successfully reduced overtopping even further without increasing the freeboard of the crownwall. Crownwalls with a fully curved (FC) face are most often used in seawalls where they are...
master thesis 2023
document
Michels, Dirk-Jan (author)
On the east coast of Romania, at Eforie, coastal erosion manifests. To strengthen the coastal area a large coastal protection project was setup involving beach nourishment combined with the construction of breakwaters. The breakwaters are designed with the well-known modified Van der Meer formulas. To ensure confidence in the breakwaters...
master thesis 2022
document
Molenkamp, Auke (author)
With the advance of urbanisation in coastal regions comes an increase in armoured shorelines and the destruction of coastal marine habitats. To combat this, ECOncrete Tech Ltd has developed a new eco-friendly armour unit, the CoastaLock. With its ecological advantages proven, its hydraulic performance is still largely unknown. This thesis aims...
master thesis 2022
document
BACHRAS, SERAFEIM (author)
Breakwaters used to protect harbours and coastal areas worldwide are one of the most common coastal structures. The complexity of the physical processes associated with the design has led to the development of many empirical formulas while a standardized method for the selection of breakwaters’ design parameters in the EU does not yet exist. The...
student report 2022
document
van Dam, Menno (author)
The authorities of the Port of Genoa have requested the construction of a new vertical breakwater for the Sampierdarena canal, as well as the subsequent demolition of part of the existing breakwater. The reason for this project is the need to expand the size of the canal, to allow larger vessels to safely use it. A choice is made for a vertical...
master thesis 2022
document
Etemad-Shahidi, Amir (author), Koosheh, Ali (author), van Gent, M.R.A. (author)
Estimation of the mean overtopping discharge is a major task in the design and assessment of the crest level of rubble mound structures such as breakwaters and seawalls. The tolerable mean overtopping rates are given based on the associated risk and wave characteristics. Several empirical formulas have been developed for the prediction of...
journal article 2022
document
Goedhart, Wisse (author)
The erosion of the seabed in front of coastal structures induced by waves can lead to multiple types of failure instability or function of the structure. On this topic most research has been done into erosion in front of vertical structures. For sloping structures a knowledge gap exists in the understanding of the processes that lead to erosion...
master thesis 2021
document
Dermentzoglou, Dimitrios (author), Castellino, Myrta (author), De Girolamo, Paolo (author), Partovi, Maziar (author), Schreppers, Gerd-Jan (author), Antonini, A. (author)
Several failures of recurved concrete crownwalls have been observed in recent years. This work aims to get a better insight within the processes underlying the loading phase of these structures due to non-breaking wave impulsive loading conditions and to identify the dominant failure modes. The investigation is carried out through an offline one...
journal article 2021
document
Jantzen, Casper (author)
On the seabed in front of coastal structures sediment movement takes place due to incoming waves. The erosion of sediments creates a scour hole at the toe of structures such as embankments, breakwaters and dikes. This scour hole may lead to instabilities in the main structure due to material sliding into this hole. A common method of protecting...
master thesis 2020
document
Jonker, Ruben (author)
In this research OpenFOAM is used to model and determine the complex hydrodynamic behaviour of a Homogeneous low-crested structure (HLCS) consisting of cubipod artificial concrete elements. The validated model is used to gain insight in the design sensitivities of a two dimensional cross sectional layout to reduce sea wall overtopping. HLCS and...
master thesis 2020
document
van Lent, E.G. (author)
The stability of breakwaters in seismically active areas is not always guaranteed. A new approach to model a breakwater subjected to an earthquake is with PM4Sand. The goal of this research is to find if breakwaters subjected to earthquakes can be correctly modelled with PM4Sand.<br/>To investigate PM4Sand a breakwater subjected to an earthquake...
master thesis 2020
document
Houtzager, Daan (author)
The purpose of this MSc thesis is to do an experimental study into the spatial and temporal variation of rocking armour units. Armour units on a breakwater slope under wave loading can sometimes start to move back and forth, this phenomenon is known as rocking. Rocking can lead to significant impacts between armour units, which can result in...
master thesis 2020
document
Ruwiel, Tim (author)
XblocPlus is a single layer armour unit that is recently developed by BAM Infraconsult. It is the successor of the Xbloc. An important advantage of the XblocPlus is the relatively high construction speed compared to the Xbloc. The increased construction speed is caused by the possibility to place XblocPlus in a uniform pattern and the relatively...
master thesis 2020
document
van den Berg, Ileen (author), Hofland, Bas (author), Reedijk, Bas (author)
Many rubble mound breakwaters are nowadays made with an armour layer consisting of single layer interlocking elements. The stability of these armour layers could well be influenced by the irregularity of the rock underlayer, as that influences the degree of interlocking. Especially for the new types of regularly placed armour, this might be...
journal article 2020
document
Broos, Jan-Willem (author)
XblocPlus is a new uniformly placed single layer armour unit, developed by Delta Marine Consultants (BAM Infraconsult). This report focuses on the stability of the first row of armour units, as this row is interlocked less than other rows. When the first row starts to slide, this is a big threat to the stability of the entire armour layer....
master thesis 2019
document
van Grieken, Jesper (author)
In this thesis, a general method to predict the notional permeability for various structure lay-outs is developed. A numerical model is used to find a characteristic value for different structure lay-outs: the three structures for which Van der Meer determined the P-value, and a fourth structure of which the P-value has to be predicted. The P...
master thesis 2019
Searched for: subject%3A%22breakwater%22
(1 - 20 of 39)

Pages

List view
Grid view