Searched for: subject%3A%22calibration%22
(1 - 20 of 365)

Pages

document
Gong, J. (author)
Quantum computers have gained widespread interest from both industry and academia in the last decade as they are very promising for solving problems intractable by classical computers. However, there is a limited number of qubits in current quantum processors, which impedes the practical applications of a quantum computer. To increase the number...
doctoral thesis 2023
document
Broman, Casper (author)
After overtopping, the most common failure mechanism in the world that leads to a dike breach is the instability of the inner slope. Two stability calculations are required for the semi-probabilistic assessment of inner slope stability. One calculation is without significant overtopping and the other calculation is with significant overtopping...
master thesis 2023
document
Tonucci, Elena (author)
Ariel is an ESA space telescope planned for launch in 2029. It is aimed at observing ∼1,000 exoplanets using transit spectroscopy at infrared wavelengths between 0.5-7.8μm, to characterise the chemical composition and thermal structure of their atmospheres. To detect minute flux variations and confidently extract the exoplanet signal, Ariel...
master thesis 2023
document
Heijs, Floor (author)
Background: Knee Osteoarthritis (KOA) is the predominant form of osteoarthritis, and its incidence is anticipated to rise due to an ageing and increasingly overweight population. Altering the Foot Progression Angle (FPA) has demonstrated potential in mitigating the progression of KOA. Wearable feedback methods, especially those utilising single...
master thesis 2023
document
Dutta, Deb (author)
To fulfill the vision of scalable quantum computers, cryogenic CMOS is a promising technology to implement the electronic interface for large-scale quantum processors. Research over the years has shown performance improvements in CMOS transistors in commercially viable technology at cryogenic temperatures. While the physics behind the operation...
master thesis 2023
document
Liu, Qingxin (author)
Most injuries in football occur in the lower extremities due to high muscle stress. To prevent such injuries, the Dutch Football Association (KNVB) and the Delft University of Technology developed the Smart Sensor Shorts, an inertial sensor-based tracking system measuring the athlete’s lower body kinematics, to improve physical load estimates...
master thesis 2023
document
van der Poel, Hugo (author)
During this bachelorproject, more research is done to investigate the properties of the Hanea’s and Nane’s calibration score and to look at slight adjustment of Hanea’s and Nane’s calibration score. Both simulated data and real data will be used to investigate the behaviour of these calibration scores.
bachelor thesis 2023
document
Abo Alainein, Mohammed (author)
This thesis provides an investigation of the architecture and the design of the coarse DACs in continuous time pipeline (CTP) ADC to achieve high SFDR performance within a large bandwidth at sampling frequency of 4.8 GHz in TSMC 28nm technology.<br style="box-sizing: border-box"/> Mismatch errors of the coarse DACs in CTP ADC are very...
master thesis 2023
document
Joshi, Amey (author)
The light and frequent earthquakes in the north of the Netherlands, particularly in the province of Groningen, have recently exposed the unreinforced masonry structures to seismic activities. Since these structures do not adhere to seismic regulations, they are considered vulnerable to seismicity. The ultimate state capacity of the structures is...
master thesis 2023
document
Moriaux, Olivier (author)
Unsteady surface pressures shed light on the turbulent structures of boundary layer flow, which dictate for a large part the aerodynamic and aeroacoustic performance of aerodynamic bodies submersed in a flow. Remote microphone probes (RMP), e.g., pinhole probes, provide advantages compared to flush-mounted probes because of their reduced sensing...
master thesis 2023
document
van Selm, GertJan (author)
Due to the constant growth of global maritime shipping, the optimization of grabs used for unloading bulk carriers is more and more relevant. Especially for a coarse material like limestone, the average payload can be improved, by altering the grab design. It is suggested that the penetration and cutting depth of a grab can be improved, which...
master thesis 2023
document
Rijkeboer, Mats (author)
Highly accurate time sources, such as Cesium-based or GPS clocks, are the best candidates to provide a correct notion of time, but are too costly and impractical for implementation in every modern digital device. Ubiquitously, (crystal) oscillators are employed instead. To maintain a shared notion of time, the offsets and drift/jitter have to be...
master thesis 2023
document
Troost, Christian (author), Huber, Robert (author), Bell, Andrew R. (author), van Delden, Hedwig (author), Filatova, T. (author), Le, Quang Bao (author), Lippe, Melvin (author), Niamir, Leila (author), Polhill, J. Gareth (author), Sun, Zhanli (author), Berger, Thomas (author)
There has so far been no shared understanding of validity in agent-based simulation. We here conceptualise validation as systematically substantiating the premises on which conclusions from simulation analysis for a particular modelling context are built. Given such a systematic perspective, validity of agent-based models cannot be ensured if...
journal article 2023
document
Cunillera, A. (author), Bešinović, Nikola (author), Lentink, Ramon M. (author), van Oort, N. (author), Goverde, R.M.P. (author)
The dynamics of a moving train are usually described by means of a motion model based on Newton's second law. This model uses as input track geometry data and train characteristics like mass, the parameters that model the running resistance, the maximum tractive effort and power, and the brake rates to be applied. It can reproduce and predict...
journal article 2023
document
van der Graaf, H. (author), Bertolini, Alessandro (author), van Heijningen, Joris (author), Bouwens, Bram (author), de Gaay Fortman, Nelson (author), van der Reep, Tom (author), Otemann, Lennart (author)
The Rasnik system is a 3-point optical displacement monitor with sub-nanometer precision. The CCD-Rasnik alignment system was developed in 1993 for monitoring the alignment of the muon chambers of the ATLAS Muon Spectrometer at CERN. Since then, the development has continued as new CMOS imaging pixel chips became available. In this work the...
journal article 2023
document
Ramamohan, Krishnaprasad Nambur (author), Chepuri, Sundeep Prabhakar (author), Comesana, Daniel Fernandez (author), Leus, G.J.T. (author)
In this work, we consider the self-calibration problem of joint calibration and direction-of-Arrival (DOA) estimation using acoustic sensor arrays. Unlike many previous iterative approaches, we propose solvers that can be readily used for both linear and non-linear arrays for jointly estimating the sensor gain, phase errors, and the source...
journal article 2023
document
Schreiter, Lucas (author), Stolle, Claudia (author), Rauberg, Jan (author), Kervalishvili, Guram (author), van den IJssel, J.A.A. (author), Arnold, Daniel (author), Xiong, Chao (author), Callegare, Andyara (author)
Satellites in Low Earth Orbit (LEO) are essential for sounding the topside ionosphere. In this work, we present and validate a data set of Total Electron Content (TEC) and in situ electron density observations from the Gravity Recovery And Climate Experiment (GRACE) and GRACE-Follow-On missions as well as a TEC data set from the CHAllenging...
journal article 2023
document
Abunada, M.B.M. (author), Dhakal, Nirajan (author), Andyar, William Z. (author), Li, Yuke (author), Ajok, Pamela (author), Ghaffour, Noreddine (author), Schippers, Jan C. (author), Kennedy, M.D. (author)
This study aimed to calibrate and validate the MFI-UF method in order to ensure the accuracy of particulate fouling measurements in RO. Firstly, the MFI-UF calibration was examined using two solutions of standard particles (dextran and polystyrene). Two main criteria were investigated: (i) MFI-UF linearity with particle concentrations at both...
journal article 2023
document
Tsitsilonis, Konstantinos Marios (author), Theotokatos, Gerasimos (author), Patil, Chaitanya (author), Coraddu, A. (author)
The advancements in digital twins when combined with the use of the machine learning tools can facilitate the effective health assessment and diagnostics of safety critical systems. This study aims at developing a framework to address the health assessment of marine engines utilising digital twins based on first-principles. This framework...
journal article 2023
document
Yost, Kaleigh M. (author), Martinelli, M. (author), Yerro, Alba (author), Green, Russell A. (author), de Lange, Dirk A. (author)
Cone penetrometer tests (CPTs) are used to characterize soil for a variety of geotechnical engineering applications, including earthquake-induced liquefaction triggering assessment. Numerical modeling of CPTs is frequently used to better understand soil behavior, soil-penetrometer interaction, and engineering estimates made from CPT data....
journal article 2023
Searched for: subject%3A%22calibration%22
(1 - 20 of 365)

Pages