Searched for: subject:"coating"
(1 - 20 of 145)

Pages

document
Tsoy, Natalya (author), Prado, Valentina (author), Wypkema, Aike (author), Quist, J.N. (author), Mourad, Maurice (author)
Environmental analysis should be performed early in the Research and Development (R&D) phases of new technologies to timely determine potential impact and, thereby, include prevention and minimization of unfavorable ecological impact into the innovation process. Here, we demonstrate the application of anticipatory Life Cycle Assessment ...
journal article 2019
document
Visser, P. (author)
For decades, scientists and engineers are searching for a safe and environmentally friendly alternative for the toxic chromate corrosion inhibitors in active protective coatings for the protection of aerospace aluminium alloys. In this search many different compounds have been investigated as leachable corrosion inhibitor, but no alternative...
doctoral thesis 2019
document
Dong, H. (author), Ye, G. (author)
Chloride-induced corrosion is a critical issue for RC structures. Cement-based coatings can be used to protect concrete structures with unsatisfactory quality against chloride ingress. To evaluate the effectiveness of the coatings to extend the service life of coated concrete structures, the evolution of the chloride profile in the coated...
journal article 2019
document
Xiong, Zhihua (author), Liu, Yuqing (author), Zuo, Yize (author), Xin, H. (author)
In order to evaluate the shear performance of sand-coated glass fiber-reinforced polymer (GFRP) perforated connectors (SCGPC) embedded in concrete, 8 pull-out tests were conducted. Finite element (FE) analysis considering GFRP failure and cohesion between GFRP and concrete of SCGPC were conducted for parametric analysis. Effects of surface...
journal article 2019
document
Groen, J.P. (author), Wu, J. (author), Sigmund, Ole (author)
This paper concerns compliance minimization and projection of coated structures with orthotropic infill material in 2D. The purpose of the work is two-fold. First, we introduce an efficient homogenization-based approach to perform topology optimization of coated structures with orthotropic infill material. The design space is relaxed to allow...
journal article 2019
document
Qu, Zuopeng (author), Wang, Lei (author), Tang, H. (author), Ye, H. (author), Li, Meicheng (author)
In this paper, four composite coatings of nano-SnS/polyvinylbutyral (PVB), nano-MoS<sub>2</sub>/PVB, nano-SnS-Zn/PVB, and nano-MoS<sub>2</sub>-Zn/PVB were prepared, and their anti-corrosion mechanism was analyzed by experimental and theoretical calculations. The results of the electrochemical experiments show that the effect of nano-MoS<sub>2...
journal article 2019
document
Jia, Jinhao (author), Bai, Shuxin (author), Xiong, Degan (author), Wang, Jie (author), Chang, J. (author)
Tungsten coatings were deposited on diamond particles by vacuum magnetron sputtering. The coated diamond particles were firstly heat treated at different temperatures, and diamond/copper (Cu) composites were fabricated by using a pressureless infiltration method afterwards. The influences of heat treatment on the microstructure and...
journal article 2019
document
Hedayati, R. (author), Rubio Carpio, A. (author), Luesutthiviboon, S. (author), Ragni, D. (author), Avallone, F. (author), Casalino, D. (author), van der Zwaag, S. (author)
Studies on porous trailing edges, manufactured with open-cell Ni-Cr-Al foams with sub-millimeter pore sizes, have shown encouraging results for the mitigation of turbulent boundary-layer trailing-edge noise. However, the achieved noise mitigation is typically dependent upon the pore geometry, which is fixed after manufacturing. In this study,...
journal article 2019
document
Anusuya Ponnusami, S. (author), Krishnasamy, J. (author), Turteltaub, S.R. (author), van der Zwaag, S. (author)
A computational fracture analysis is conducted on a self-healing particulate composite employing a finite element model of an actual microstructure. The key objective is to quantify the effects of the actual morphology and the fracture properties of the healing particles on the overall mechanical behaviour of the (MoSi2) particle-dispersed...
journal article 2019
document
Beekers, D.I. (author), Lattwein, Kirby R. (author), Kouijzer, Joop J.P. (author), Langeveld, Simone A.G. (author), Vegter, M. (author), Beurskens, Robert (author), Mastik, Frits (author), Verduyn Lunel, Rogier (author), van der Steen, A.F.W. (author), de Jong, N. (author)
Controlling microbubble-mediated drug delivery requires the underlying biological and physical mechanisms to be unraveled. To image both microbubble oscillation upon ultrasound insonification and the resulting cellular response, we developed an optical imaging system that can achieve the necessary nanosecond temporal and nanometer spatial...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Laird, Jamie S. (author), Visser, P. (author), Ranade, S. (author), Hughes, A.E. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Studies of Li depletion in sections of a Li <sub>2</sub> CO <sub>3</sub> -primer comprising a polyurethane binder, MgO, TiO <sub>2</sub> , BaSO <sub>4</sub> in addition to Li <sub>2</sub> CO <sub>3,</sub> were performed using a combination of particle induced γ-ray and X-ray emission spectroscopies along with SEM/EDS analysis. A mixture of...
journal article 2019
document
Krishnasamy, J. (author), Ponnusami, Sathiskumar A. (author), Turteltaub, S.R. (author), van der Zwaag, S. (author)
The performance of a self-healing Thermal Barrier Coating (TBC) containing dispersed healing particles depends crucially on the mismatch in thermomechanical properties between the healing particles and the TBC matrix. The present work systematically investigates this phenomenon based on numerical simulations using cohesive element-based finite...
journal article 2018
document
Zajec, Bojan (author), Bajt Leban, Mirjam (author), Kosec, Tadeja (author), Kuhar, Vili (author), Legat, Andraž (author), Lenart, Stanislav (author), Fifer Bizjak, Karmen (author), Gavin, K. (author)
An important aspect regarding the sustainability of steel structures is to ensure the structure is protected from corrosion. A number of surface coatings are available that play an important role in protecting these structures. An important part of the management of these structures is reliable and regular inspection along with methods for early...
journal article 2018
document
Saini, Vimal (author), von Tapavicza, Max (author), Eloo, Christina (author), Braesch, Katrin (author), Wack, Holger (author), Nellesen, Anke (author), Schmidt, Annette M. (author), Garcia Espallargas, Santiago J. (author)
Superabsorbent polymers (SAPs) are well known for their ability to absorb and hold high water amounts accompanied by a high volume expansion. In this work we show the benefits of this underlying property of SAPs to induce underwater crack closure with subsequent barrier restoration in damaged protective coatings. For the proof of concept,...
journal article 2018
document
Abbel, Robert (author), Galagan, Yulia (author), Groen, W.A. (author)
The production of electronic devices using solution based (“wet”) deposition technologies has some decisive technical and commercial advantages compared to competing approaches like vacuum based (“dry”) manufacturing. Particularly, the potential to scale up production processes to large areas and high volumes by introducing continuous roll-to...
review 2018
document
Dong, H. (author)
Concrete is currently the most widely used material in construction field. A good performance of concrete structures is required for reaching the designed service life. However, the initial scatter in the quality of concrete is unavoidable in practice, possibly resulting from improper design, poor execution, or deterioration due to stresses...
doctoral thesis 2018
document
Anusuya Ponnusami, S. (author)
Research in the field of self-healing materials gained significant attention in the last decade owing to its promise of enhanced durability of the material components in engineering applications. Though the research has led to several successful demonstrations, extensive experimental tests will be required for a successful demonstration. Further...
doctoral thesis 2018
document
Zhang, Zhaoshuai (author), Zhang, Long (author), Yu, C. (author), Yan, Xinlin (author), Wang, L. (author)
Garnet-type Li<sub>7</sub>La<sub>3</sub>Zr<sub>2</sub>O<sub>12</sub> solid electrolytes were commonly prepared by two steps solid-state reaction method, which undergoes high temperature over 1000 °C and thus inevitable for lithium volatilization and formation of secondary phases. Here, we propose a new intergrain architecture engineering of a...
journal article 2018
document
Mirzakhanzadeh, Z. (author), Kosari, A. (author), Moayed, M. H. (author), Naderi, R. (author), Taheri, P. (author), Mol, J.M.C. (author)
This work investigates the synergetic effect of zinc aluminum polyphosphate (ZAPP) and 2-mercaptobenzimidazole (MBI) on the corrosion protection of mild steel coated with a solvent-borne epoxy-polyamide layer. The magnitude and trend of electrochemical impedance spectroscopy data over 70-d immersion in 3.5 wt.% NaCl solution indicate superior...
journal article 2018
Searched for: subject:"coating"
(1 - 20 of 145)

Pages