Effect of shear stresses on fibre direction tensile failure using a new simple and reliable test method with thin plies

A new method of creating in-plane combined tension-shear stress states using only tensile loading is proposed. Thin-ply angle-ply carbon/epoxy laminates are sandwiched between unidirectional glass layers to eliminate any stress concentration around the samples ends and gripping zone. Use of the thin plies successfully suppresses early...

Acoustic Emission-Based Analysis of Damage Mechanisms in FilamentWound Fiber Reinforced Composite Tubes

This study investigates the mechanical behavior and damage mechanisms of thin-walled glass/epoxy filament wound tubes under quasi-static lateral loads. The novelty is that the tubes are reinforced in critical areas using strip composite patches to provide a topology-optimized tube, and their damage mechanisms and mechanical performance are...

Application of 3D Printing in Pharmaceutical Sciences, and Evaluation of Administration Routes for Drug-Loaded Composites

3D printing is a novel approach in the pharmaceutical field, but its usage has not been fully established. This method can promote drug therapy and overcome some traditional treatment challenges in different ways that are discussed in this paper. “One-size-fits-all”, Large-scale production, and less patient and physician acceptability are...

Barely visible impact damage detection in composite structures using deep learning networks with varying complexities

Visual inspection is one of the most common non-destructive testing (NDT) methods that offers a fast evaluation of surface damage in aerospace composite structures. However, it is highly dependent on human-related factors and may not detect barely visible impact damage (BVID). In this research, low velocity impact tests with different energy...

Smart hybrid composite sensor technology to enhance the detection of low energy impact damage in composite structures

This paper introduces novel structural health monitoring (SHM) sensors to improve the detection of low energy impact damage in laminated composites. The sensor is a purposely designed thin-ply hybrid composite, composed of a layer of unidirectional S-glass/epoxy and another layer of unidirectional ultra-high modulus (UHM) carbon/epoxy. The...

Experimental and numerical study of hybrid (CFRP-GFRP) composite laminates containing circular cut-outs under shear loading

Previous works have established the response and failure behaviour of hybrid (CFRP-GFRP) laminates when subjected to a wide range of destabilising loads. However, to date no works have focused on plates with cut-outs under shear loading and quantified the influence of selective laminate shapes and hybridisation on their post-buckling response...

A review on self-reporting mechanochromic composites: An emerging technology for structural health monitoring

Recently emerging mechanochromic systems are becoming highly attractive for structural health monitoring (SHM) purposes in various industries, such as civil, wind, and aerospace, to improve the safety and performance of structures. These are based on self-reporting polymer composites which provide a light-weight sensor with an easy-to-read...

Investigating the fatigue behaviour of quasi-isotropic pseudo-ductile thin-ply carbon/glass epoxy hybrid composites

This paper investigates the fatigue behaviour of pseudo-ductile Quasi-Isotropic (QI) interlayer hybrids with un-notched and open-hole configurations. Two different types of QI pseudo-ductile hybrids were evaluated; HighC, with carbon to glass thickness ratio of 0.29, that is made of thin-ply M46JB-carbon/epoxy and thin-ply Xstrand-glass/epoxy...

Fiber reinforced polymer composites in bridge industry

This paper presents a concise state-of-the-art review on the use of Fiber Reinforced Polymers (FRPs) in bridge engineering. The paper is organized into commonly used FRP bridge components, and different materials/manufacturing techniques used for repairing and construction of FRP bridges. Efforts have been made to give a clear and concise...

High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis

The aim of this work was to investigate the effect of loading angle variation on the pseudo-ductility of quasi-isotropic (QI) hybrid composite laminates. Previously, hybrids of thin-ply carbon fibres and standard glass fibres were found to have an excellent pseudo-ductile behaviour both in unidirectional (UD) and QI configurations when subjected...

Acoustic emission based investigation on the effect of temperature and hybridization on drop weight impact and post-impact residual strength of hemp and basalt fibres reinforced polymer composite laminates

This paper investigates the effect of temperature and hybridization on the impact damage evolution and post-impact residual strength of hemp/epoxy, basalt/epoxy and their hybrid laminates, using mechanical and acoustic emission (AE) based analysis. To start with, the specimens were impacted by a drop weight impact tower machine at two...

The study of buckling and post-buckling behavior of laminated composites consisting multiple delaminations using acoustic emission

This study introduces a comprehensive set of designed and tested glass/epoxy composites, AE monitoring and signal processing techniques; (i) to investigate the effect of multiple delaminations on buckling and post-buckling behaviors of laminated composites and (ii) to evaluate Acoustic Emission (AE) technique ability to monitor the buckling...