Searched for: subject:"conductivity"
(1 - 15 of 15)
document
Tsekmes, I.A. (author)
The addition of microsized fillers to polymers, in order to tailor their properties, has been extensively used in many industrial applications since the 1960s. The same approach applies to the field of electrical insulation. Epoxy resin is a widely used polymer in the electrical power sector, but it is usually loaded with microsized fillers,...
doctoral thesis 2016
document
Fimberger, M. (author), Tsekmes, I.A. (author), Kochetov, R. (author), Smit, J.J. (author), Wiesbrock, F. (author)
Poly(2-nonyl-2-oxazoline)80-stat-poly(2-dec-9?-enyl-2-oxazoline)20 and poly(2-dec-9?-enyl-2-oxazoline)100 can be synthesized from the cationic ring-opening polymerization of monomers that can be derived from fatty acids from renewable resources. These (co)poly(2-oxazoline)s can be crosslinked with di- and trifunctional mercapto compounds using...
journal article 2015
document
Calado, V.E. (author), Schneider, G.F. (author), Theulings, A.M.M.G. (author), Dekker, C. (author), Vandersypen, L.M.K. (author)
We study the formation of wrinkles in graphene upon wet transfer onto a hydrophilic target substrate, whereby draining of water appears to play an important role. We are able to control the orientation of the wrinkles by tuning the surface morphology. Wrinkles are absent in flakes transferred to strongly hydrophobic substrates, a further...
journal article 2012
document
Hunziker, J.W. (author), Slob, E.C. (author), Mulder, W. (author)
In marine time-domain controlled-source electromagnetics (CSEM), there are two different acquisition methods: with horizontal sources for fast and simple data acquisition or with vertical sources for minimizing the effects of the airwave. Illustrations of the electric field as a function of space and time for various source antenna orientations,...
journal article 2011
document
Yáng, Z. (author), Harvey, A.S. (author), Infortuna, A. (author), Schoonman, J. (author), Gauckler, L.J. (author)
Bulk BaxSr1 - xCoyFe1 - yO3 - dBaxSr1?xCoyFe1?yO3? compositions (BSCF) were synthesized by the solid-state reaction method. The electrical conductivity of ceramic bars was measured using a dc four-probe method as a function of temperature in air up to 970 °C. All compositions showed thermally activated p-type semi-conductivity up to ~450 °C and...
journal article 2010
document
Scheffler, M. (author), Nadj-Perge, S. (author), Kouwenhoven, L.P. (author), Borgström, M.T. (author), Bakkers, E.P.A.M. (author)
Electrical conductance through InAs nanowires is relevant for electronic applications as well as for fundamental quantum experiments. Here, we employ nominally undoped, slightly tapered InAs nanowires to study the diameter dependence of their conductance. By contacting multiple sections of each wire, we can study the diameter dependence within...
journal article 2009
document
Chen, P. (author), Salemink, H.W.M. (author), Alkemade, P.F.A. (author)
Ion-beam-induced deposition (IBID) is a powerful technique for prototyping three-dimensional nanostructures. To study its capability for this purpose, the authors investigate the proximity effect in IBID of nanopillars. In particular, the changes in shape and dimension of pillars are studied when a second pillar is grown near an existing pillar....
journal article 2009
document
Prins, F. (author), Hayashi, T. (author), De Vos van Steenwijk, B.J.A. (author), Gao, B. (author), Osorio, E.A. (author), Muraki, K. (author), Van der Zant, H.S.J. (author)
We present a method to make Pt nanometer-spaced electrodes that are free of metallic particles and stable at ambient conditions. The nanogaps are fabricated using feedback-controlled electromigration to form few-atom contacts. When performing this procedure at elevated temperatures (>420?K), the Pt contacts undergo self-breaking so that...
journal article 2009
document
Vroubel, M. (author), Rejaei, B. (author)
The spin-wave spectrum of a ferromagnetic stripe placed above a metallic layer with finite conductivity is studied by using the magnetostatic Green’s function formalism. It is shown that the frequency and linewidth of the resonances are uniquely determined by complex, mode-dependent demagnetization factors. The formalism developed is used to...
journal article 2008
document
Khalili Amiri, P.K. (author), Rejaei, B. (author), Vroubel, M. (author), Zhuang, Y. (author)
The authors report on the observation of nonreciprocal spin wave propagation in a thin ( ? 200?nm) patterned Ni–Fe stripe. The spin wave transmission spectrum is measured using a pair of microstrip lines as antennas. The nonreciprocity of surface wave dispersion brought about by an adjacent aluminum ground leads to a nonreciprocal coupling of...
journal article 2007
document
Molinari, A. (author), Gutiérrez, I. (author), Hulea, I.N. (author), Russo, S. (author), Morpurgo, A.F. (author)
The authors report a systematic study of the bias-dependent contact resistance in rubrene single-crystal field-effect transistors with Ni, Co, Cu, Au, and Pt electrodes. They show that the reproducibility in the values of contact resistance strongly depends on the metal, ranging from a factor of 2 for Ni to more than three orders of magnitude...
journal article 2007
document
Deachapunya, S. (author), Stefanov, A. (author), Berninger, M. (author), Ulbricht, H. (author), Reiger, E. (author), Doltsinis, N.L. (author), Arndt, M. (author)
The authors present new measurements of thermal and electrical properties for two porphyrin derivatives. They determine their sublimation enthalpy from the temperature dependence of the effusive beam intensity. The authors study H2TPP and Fe(TPP)Cl in matter-wave interferometry. Both molecules have nearly equal de Broglie wavelengths but...
journal article 2007
document
Sellier, H. (author), Lansbergen, G.P. (author), Caro, J. (author), Rogge, S. (author), Collaert, N. (author), Ferain, I. (author), Jurczak, M. (author), Biesemans, S. (author)
The authors investigate the subthreshold behavior of triple-gate silicon field-effect transistors by low-temperature transport experiments. These three-dimensional nanoscale devices consist of a lithographically defined silicon nanowire surrounded by a gate with an active region as small as a few tens of nanometers down to 50×60×35?nm3....
journal article 2007
document
Durkut, M. (author), Mas-Torrent, M. (author), Hadley, P. (author), Jonkheijm, P. (author), Schenning, A.P.H.J. (author), Meijer, E.W. (author), George, S. (author), Ajayaghosh, A. (author)
The electrical properties of supermolecular assemblies of oligo(p-phenylene vinylene) were studied. These materials self-assemble into well-defined cylindrical structures in solution with lengths in the range of 100?nm–10??m and diameters between 5 and 200?nm. Atomic force microscopy showed that by adjusting the concentration, either individual...
journal article 2006
document
Pedarnig, J.D. (author), Rössler, R. (author), Delamare, M.P. (author), Lang, W. (author), Bäuerle, D. (author), Köhler, A. (author), Zandbergen, H.W. (author)
Vicinal YBa2Cu3O7?? (YBCO) thin films of thickness h = 20–480?nm are grown by pulsed-laser deposition on 10° miscut (001) SrTiO3 substrates. The anisotropic resistivities, c-axis texture, and critical temperature drastically depend on the thickness of vicinal films. High-resolution electron microscopy reveals a defect microstructure with strong...
journal article 2002
Searched for: subject:"conductivity"
(1 - 15 of 15)