Searched for: subject%3A%22correlation%22
(1 - 20 of 150)

Pages

document
Lane, R.I. (author), Vos, Y. (author), Wolters, A.E. (author), van Kessel, L.C.P.M. (author), Chen, S. Elisa (author), Liv, Nalan (author), Klumperman, Judith (author), Giepmans, Ben N.G. (author), Hoogenboom, J.P. (author)
Large-scale electron microscopy (EM) allows analysis of both tissues and macromolecules in a semi-automated manner, but acquisition rate forms a bottleneck. We reasoned that a negative bias potential may be used to enhance signal collection, allowing shorter dwell times and thus increasing imaging speed. Negative bias potential has previously...
journal article 2021
document
Kilic, H. (author), Gumus, Bilal (author), Khaki, Behnam (author), Yilmaz, Musa (author), Palensky, P. (author)
n this paper, a robust data-driven method for fault detectionin photovoltaic (PV) arrays is proposed. Our method is based onthe random vector functional-link networks (RVFLN) which has theadvantage of randomly assigning hidden layer parameters with no tuning. To eliminate the effect of measurement noise and overfitting in thetraining process...
conference paper 2021
document
Li, G. (author), Knoop, V.L. (author), van Lint, J.W.C. (author)
Accurate and explainable short-term traffic forecasting is pivotal for making trustworthy decisions in advanced traffic control and guidance systems. Recently, deep learning approach, as a data-driven alternative to traffic flow model-based data assimilation and prediction methods, has become popular in this domain. Many of these deep learning...
journal article 2021
document
Mema, I. (author), Padding, J.T. (author)
Having proper correlations for hydrodynamic forces is essential for successful CFD-DEM simulations of a fluidized bed. For spherical particles in a fluidized bed, efficient correlations for predicting the drag force, including the crowding effect caused by surrounding particles, are already available and well tested. However, for elongated...
journal article 2021
document
Jiang, Guoying (author), Xiong, Chao (author), Stolle, Claudia (author), Xu, Jiyao (author), Yuan, Wei (author), Makela, Jonathan J. (author), Harding, Brian J. (author), Kerr, Robert B. (author), March, G. (author), Siemes, C. (author)
The re-estimates of thermospheric winds from the Gravity field and steady-state Ocean Circulation Explorer (GOCE) accelerometer measurements were released in April 2019. In this study, we compared the new-released GOCE crosswind (cross-track wind) data with the horizontal winds measured by four Fabry-Perot interferometers (FPIs) located at...
journal article 2021
document
Li, X. (author), Saeedifar, M. (author), Benedictus, R. (author), Zarouchas, D. (author)
This paper investigates the loading rate effect on both mechanical properties and damage accumulation process of [0°2/90°4]S carbon fiber-polymer laminates under tensile loading. In-situ edge observations, Acoustic Emission and Digital Image Correlation techniques were utilized simultaneously to monitor the state of damage in real time. Results...
journal article 2021
document
van Nes, A. (author), Yamu, Claudia (author)
In previous chapters, we demonstrated various analytic techniques focusing on the spatial aspects of the built environment. In this chapter, we discuss various methods and techniques for collecting qualitative and quantitative data dealing with human behaviour and how to connect such data to the results from various space syntax analyses. This...
book chapter 2021
document
Du, Cong (author), Lu, Guoyang (author), Wang, H. (author), Sun, Yiren (author), Liu, Pengfei (author), Wang, Dawei (author), Leischner, Sabine (author), Oeser, Markus (author)
Porous asphalt (PA) pavements are widely employed in areas with wet climates. As particle enhancement inclusions in asphalt mastic, mineral fillers play essential roles in improving the performance of PA pavements. This study developed a coupled multiscale finite element (FE) model, involving the mesostructure of PA mixture and PA pavement....
journal article 2021
document
Yan, R. (author), El Bamby, H. (author), Veljkovic, M. (author), Xin, Haohui (author), Yang, F. (author)
The coupon specimen with a transverse butt weld in the middle could be used for determining local constitutive properties of the heat-affected zone (HAZ) and the weld metal (WM) based on the digital image correlation (DIC). However, limited research is reported to demonstrate how to identify the boundary of each region in DIC results....
journal article 2021
document
Castro, Saullo G.P. (author), Almeida Jr., J.H.S. (author), St-Pierre, Luc (author), Wang, Z. (author)
Measuring the geometric imperfections in cylindrical shells is a critical step necessary to create accurate numerical models that can capture the imperfection-sensitive behavior of these structures. Modern composite structures, such as variable–angle filament–wound (VAFW) cylinders, have a unique imperfection signature that is still unknown to...
journal article 2021
document
Srinivasa Raja, A. (author), de Boer, Pascal (author), Giepmans, Ben N.G. (author), Hoogenboom, J.P. (author)
Electron microscopy is crucial for imaging biological ultrastructure at nanometer resolution. However, electron irradiation also causes specimen damage, reflected in structural and chemical changes that can give rise to alternative signals. Here, luminescence induced by electron-beam irradiation is reported across a range of materials widely...
journal article 2021
document
Saeedifar, M. (author), Saleh, M. (author), Nijhuis, Peter (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author)
This study is devoted to the use of acoustic emission technique for a comprehensive damage assessment, that is, damage detection, localization, and classification, of an aeronautical metal-to-composite bonded panel. The structure comprised a titanium panel adhesively bonded to carbon fiber–reinforced plastic omega stringers. The panel contained...
journal article 2021
document
Saleh, M. (author), Tomić, Nataša Z. (author), Marinković, Aleksandar (author), Teixeira De Freitas, S. (author)
Two synthesized eco-epoxy components based on TA: (A) glycidyl ether and (B) glycidyl phosphate ester, are used, as a replacement for the Bisphenol A (BPA) based epoxy component, for bonding aluminum (Al) and carbon fiber reinforced polymer (CFRP). Their effect on the mode I fracture toughness (GI) is evaluated by Double Cantilever Beam (DCB)...
journal article 2021
document
Meijer, Mandy (author), Keo, D.L. (author), van Leeuwen, Judith M.C. (author), Dzyubachyk, Oleh (author), Meijer, Onno C. (author), Vinkers, Christiaan H. (author), Mahfouz, A.M.E.T.A. (author)
The biological mechanisms underlying inter-individual differences in human stress reactivity remain poorly understood. We aimed to identify the molecular underpinning of aberrant neural stress sensitivity in individuals at risk for schizophrenia. Linking mRNA expression data from the Allen Human Brain Atlas to task-based fMRI revealed 201...
journal article 2021
document
Rigotti Manesco, A.L. (author), Lado, Jose L. (author)
Quasi-flat-bands emerging in buckled monolayer graphene superlattices have been recently shown to realize correlated states analogous to those observed in twisted graphene multilayers. Here, we demonstrate the emergence of valley topology driven by competing electronic correlations in buckled graphene superlattices. We show, both by means of...
journal article 2021
document
Li, X. (author), Kupski, J.A. (author), Teixeira De Freitas, S. (author), Benedictus, R. (author), Zarouchas, D. (author)
This study investigates the early fatigue damage of cross-ply carbon/epoxy laminates. The aim is to unfold the damage accumulation process, understand the interaction between different damage mechanisms, and quantify their contribution to stiffness degradation. Tension-tension fatigue tests were performed, while edge observation and DIC...
journal article 2020
document
de Bruijckere, J. (author)
In this thesis we study charge transport through individual molecules and mainly focus on the properties of molecular spin. We fabricate nanoscale structures for transport measurements and employ the electromigration break-junction technique to realize three-terminal—transistor-like—single-molecule devices. We investigate the spin-related...
doctoral thesis 2020
document
Pacha Sanjeevi, S.K. (author), Padding, J.T. (author)
We investigate the average drag, lift, and torque on static assemblies of capsule-like particles of aspect ratio 4. The performed simulations are from Stokes flow to high Reynolds numbers (0.1 ≤ Re ≤ 1,000) at different solids volume fraction (0.1 ≤ ɛ<sub>s</sub> ≤ 0.5). Individual particle forces as a function of the incident angle ϕ with...
journal article 2020
document
Noorbergen, Lars J. (author), Turtu, Antonio (author), Kuiper, Klaudia F. (author), Kasse, Cornelis (author), van Ginneken, Sverre (author), Dekkers, Mark J. (author), Krijgsman, Wout (author), Abels, H.A. (author), Hilgen, Frederik J. (author)
Aggradation and fluvial incision controlled by downstream base-level changes at timescales of 10 to 500 kyr is incorporated in classic sequence stratigraphic models. However, upstream climate control on sediment supply and discharge variability causes fluvial incision and aggradation as well. Orbital forcing often regulates climate change at...
journal article 2020
document
Moyo, Welldone (author), Chaukura, Nhamo (author), Motsa, Machawe M. (author), Msagati, Titus A.M. (author), Mamba, Bhekie B. (author), Heijman, Sebastiaan (author), Nkambule, Thabo T.I. (author)
The removal dynamics of biodegradable dissolved organic carbon (BDOC) and natural organic matter (NOM) polarity fractions at a water treatment plant (WTP) in South Africa was studied using UV-Vis absorbance, fluorescence excitation-emission matrix, and two-dimensional synchronous fluorescence spectroscopy (SFS). This study gave insights into...
journal article 2020
Searched for: subject%3A%22correlation%22
(1 - 20 of 150)

Pages