Searched for: subject%3A%22double%255C-curved%22
(1 - 15 of 15)
document
van der Sandt, Sebastiaan (author)
The subject of this thesis is the forming of sandwich panels on a reconfigurable mould. The field of research is composite sheet forming. This novel manufacturing process at Curve Works has problems with panel quality, especially out-of-plane wrinkles. Exploratory research on quality improvement is performed by analysing the underlying...
master thesis 2018
document
Schipper, H.R. (author)
The production of precast, concrete elements with complex, double-curved geometry is expensive due to the high costcosts of the necessary moulds and the limited possibilities for mould reuse. Currently, CNC-milled foam moulds are the solution applied mostly in projects, offering good aesthetic performance, but also resulting in waste of material...
doctoral thesis 2015
document
Schipper, H.R. (author), Eigenraam, P. (author), Grünewald, S. (author), Soru, M. (author), Nap, P. (author), Van Overveld, B. (author), Vermeulen, J. (author)
The production of architectural elements with complex geometry is challenging for concrete manufacturers. Computer-numerically-controlled (CNC) milled foam moulds have been applied frequently in the last decades, resulting in good aesthetical performance. However, still the costs are high and a large volume of waste is produced. This paper...
conference paper 2015
document
Schipper, H.R. (author), Grünewald, S. (author), Eigenraam, P. (author), Raghunath, P. (author), Kok, M.A.D. (author)
Free-form buildings tend to be expensive. By optimizing the production process, economical and well-performing precast concrete structures can be manufactured. In this paper, a method is presented that allows producing highly accurate double curved-elements without the need for milling two expensive mould surfaces per single element. The...
conference paper 2014
document
Troian, S. (author)
A new architectural concept is being developed nowadays - free-form design, which allows the architects to add personality to a building through the shape itself. To sustain this development, the existing and available production techniques have to be combined with new technological innovations. The flexible mould system uses the traditional...
master thesis 2014
document
Schipper, H.R. (author), Grunewald, S. (author), Eigenraam, P. (author), Raghunath, P. (author), Kok, M. (author)
Free-form buildings tend to be expensive. By optimizing the production process, economical and wellperforming concrete structures and elements can be manufactured. In this paper, an innovative method is presented that allows producing highly accurate double curved-elements without the need for milling two expensive mould surfaces per single...
conference paper 2014
document
Schipper, H.R. (author), Grünewald, S. (author), Kok, M.A.D. (author), Nijsse, R. (author), Raghunath, P. (author)
In an earlier article (CPI issue of August 2011 [1]) a method was presented for producing precast curved panels with a thickness of a few centimeters using the 'flexible mould method'. This method is the central theme in the PhD study of the first author on the realization of freeform architecture in concrete. The concrete panels manufactured...
journal article 2013
document
Kok, M.A.D. (author)
The construction of buildings with free-form concrete surfaces can be accompanied with relatively high costs due to the production of uniquely shaped curved concrete elements. Delft University of Technology researches a method to produce such elements in a cost-efficient way using a re-usable flexible mould. The method requires a flexible...
master thesis 2013
document
Eigenraam, P. (author)
This thesis focuses on the consequences of deforming a flexible mould surface. Based on the findings a new mould design was developed in order research the deformation of the mould. Also a method was developed to obtain an accurate geometry of the mould surface.
master thesis 2013
document
Beckton, T.J. (author)
master thesis 2011
document
Schipper, H.R. (author)
В современных архитектурных решениях широко используется криволинейность свободных форм. Именно поэтому изогнутые элементы из сборного бетона могут быть потенциальным рын- ком для производителей. В прошлом не существовало просто- го способа для производства таких компонентов. Исследования, проводимые в докторантуре Дельфтского Технического...
journal article 2011
document
Van den Ende, B. (author)
This research pursues to find a form of standardization in the field of double curved facades. At the moment the engineering and construction of a double curved façade is time consuming and highly expensive. A form of standardization would reduce both and make the façade type more applicable in the ‘regular’ building domain. The methodology of...
master thesis 2011
document
Janssen, B. (author)
The construction of free form building stagnated, due to the high construction cost of it. Double curved surfaces are only applied at projects with a high profile and projects above average budget during years. The problem with double curved surfaces is mainly the formwork. The present days used techniques to construct these formworks are...
master thesis 2011
document
Schreurs, P.H.M. (author)
The 'Commuter Retreat' project was developed in the context of the Border Conditions graduation studio. This studio emphasizes on an experimental approach to architecture, based on the development of specific techniques of representation to describe specific urban and architectural phenomena. The first part of the studio focuses on the urban...
master thesis 2009
document
Lans, B. (author)
master thesis 2009
Searched for: subject%3A%22double%255C-curved%22
(1 - 15 of 15)