- document
-
Oldenhuis, Job (author)The drilling industry faces the challenge of moving away from conventional maintenance strategies to maximise operational efficiency. This thesis introduces a holistic approach to land drilling rig Predictive Maintenance (PdM), integrating component maintenance into system-level decision-making. By taking the operations of the whole system into...master thesis 2024
- document
-
de Koning, Daan (author)When drag anchors are no longer suitable for anchoring floating wind turbines to the seabed because of unfavorable soil conditions, it is necessary to use drilled and grouted anchor piles instead. For the installation of such anchor piles it is necessary to drill large diameter holes, with diameters ranging between 1 and 5 meters. The drilling...master thesis 2024
- document
-
Lee, Michael (author)Summary<br/><br/>Numerous ancient historical constructions worldwide depend primarily on an extensive array of wooden foundation piles, as they are subject to loading conditions governed by the superstructure above. Wooden foundations transfer loads through a combination of compression and lateral resistance. The inherent strength of wood...master thesis 2023
- document
-
Tutuarima, Frederieke (author)In the geothermal exploration well, NLW-GT-01, in the West Netherlands Basin, a very tight reservoir with low porosity (≤5.0%) and matrix permeability (≤ 0.1mD) has been encountered in the Main Buntsandstein Subgroup. The impact of natural fractures, which can significantly impact fluid flow in tight reservoirs, has been studied. However, there...master thesis 2023
- document
-
Groenewegen, Jessica (author)Distal cement plug removal in total hip arthroplasty revision is a time-consuming and technically challenging procedure. There is a risk of perforating the femur while drilling in the cement plug. This risk increases when the orientation of the prosthesis tip is excentric. The aim of this study was to design a reusable drill guide that...master thesis 2023
- document
-
Kalaichelvi Senthil Kumar, Ganesh ShriRaam (author)Given the desire to construct more structures using sustainable building materials, demand for wood and other bio-based building materials has risen dramatically over the decade. While timber itself is a carbon-neutral material and can sometimes even be carbon-negative, reusing wooden structural members made that have been in service for several...master thesis 2023
- document
-
Roosens, Victor (author)<b>Background:</b> Low bone quality associated with osteoporosis is an increasing health issue. The reduction in bone quality increases the risk of bone fractures and implant failure in osteosynthesis. Implant failure can be avoided by adapting the surgical procedure and postoperative care to the bone quality. This requires knowledge of the...master thesis 2022
- document
-
Blok, Robin (author)An improvement for pedicle screws would be if the screws can directly transfer their forces to the strong cortical bone of the vertebra, rather than through the softer cancellous bone. This approach requires the creation of a curved trajectory through cancellous bone. The goal of this project is to adapt the flexible oscillating drill design of...master thesis 2022
- document
-
Pleij, Lodewijk (author)The soil-grout interface friction was measured to be in between 0.0 [kPa] and 14 [kPa]. To measure this friction, a special research method was invented that enabled a tunnel to be recreated. With this setup, any formation could be used. The formation could be created with a hole in the middle which simulated a borehole. Next, by filling and...master thesis 2022
- document
-
Schots, Joost (author)Bone drilling is a surgical action required for bone fixation using plates. The holes are currently drilled using a large, conventional drill. This causes problems when limited space is available, de to the size of the drill. For that reason a new, small Compact Drilling System is proposed. In earlier research a compact self-feeding mechanism...master thesis 2022
- document
-
Veerhoek, Laura (author)In the process of drilling wells to produce hydrocarbons, an exploration strategy is used to determine which wells should be drilled and in which order. This strategy is vital, as a suboptimal drilling sequence will lead to more expenses and fewer gains.<br/>Furthermore, the wells considered in most exploration strategies are geologically<br/...master thesis 2022
- document
-
Kleisiaris, Georgios (author)The need for sustainable solutions in the energy sector has led to the rapid increase of offshore windfarms around the globe. The areas with ideal soil conditions are gradually being occupied, pushing the offshore wind industry to search for methods of installing wind turbines in hard terrain. So far, the installation of monopiles in weak rock,...master thesis 2022
- document
-
van Pelt, Tess (author)Introduction: Although being the most advanced spinal stabilization method, pedicle screw fixation has an increased number of complications compared to other surgical procedures, due to the complex spinal anatomy, large inter-patient anatomical variability, and the highly vulnerable surrounding tissue of the spine. Screw fixation strength can be...master thesis 2022
- document
-
Müller, Rob (author)Abstract—Spinal fusion surgery is an operation in which two or more adjacent vertebrae are rigidly connected, with the goal to remedy spinal instability, deformation of the vertebrae, or a herniated intervertebral disc. Vertebrae are conventionally fixated by means of pedicle screws, the downsides of which are accidental cortical wall breaches...master thesis 2022
- document
-
Klerkx, Sean (author)Open-pit mining blast patterns are designed to safely break rock mass at desired boundaries and to produce uniformly sized fragments that lead to the optimal performance of subsequent mining operations. An issue that is often overlooked, however, is the deviation of drillhole locations with respect to their coordinates as designed in the...master thesis 2021
- document
-
Griffioen, Pieter (author)The transition to renewable energy has lead to many new ways of energy production, such as wind and solar energy. For solar energy power, there is an excess of energy during summer and an deficiency of it during winter, which is reversed for the energy consumption. In order to amend this problem, there is an introduction of new ways of energy...master thesis 2021
- document
-
Millington, Joe (author)Site-specific calibration of laser induced breakdown spectroscopy (LIBS) analysis can be achieved by presenting known geological sample data to update algorithms, therefore improving analysis of unknown samples post-calibration. The goal of this project is to optimise drill core analysis by LIBS for samples from Kittilä gold mine. In total 227...master thesis 2020
- document
-
Kan, Matthijs (author)Introduction. In spinal surgery, the misplacement of spinal screws is a problem that causes (severe) pain, bleedings or even paralysis [2]. Screw misplacements are common as navigating in the spine is difficult due to the small vertebral dimensions and a lack of anatomical landmarks [3] [4]. In order to improve the navigational support of spine...master thesis 2020
- document
-
Kan, Matthijs (author)In spinal surgery, the misplacement of spinal screws is a common problem that causes (severe) pain, bleedings or even paralysis [1] [2] [3]. In order to improve the navigational support of spine surgeons, this research focuses on the development of an optical sensing diffuse reflectance spectroscopy (DRS) orthopaedic drill that identifies bone...student report 2020
- document
-
van der Laan, Jorik (author)Bone drilling is a crucial part of orthopaedic surgery. Internal fixation is a ommon orthopaedic procedure that requires drilling to improve healing of bone fractures. Tight spaces around hard to reach bone fractures impede the surgeon during the procedure. As a result there is an increased risk of complications such as thermonecrosis, overshoot...master thesis 2020