- document
-
Ornago, L. (author)In this dissertation, we analyse the charge transport of nanoscale molecular junctions in mechanically controllable break junction (MCBJ) experiments. In particular, we focus on the characterization of molecular features going beyond the "single-peak" picture, that is, considering features in the measurements in addition to themost prominent one...doctoral thesis 2023
- document
-
Atreya, V. (author)Dual-phase (DP) steels are an important class of advanced high-strength steels (AHSS) and constitute a major share of steels for the automotive industry. A microstructure consisting of hard martensite embedded in a soft ferritic matrix gives them a good combination of strength and ductility. The martensite formation in the microstructure from...doctoral thesis 2023
- document
- Liu, X. (author) doctoral thesis 2023
- document
-
Möhle, C.M. (author)Majorana zero modes (MZMs) are a topic of intense research as they constitute the main building block of topological qubits - a qubit type with potentially enhanced coherence time. A promising way to create these quantum states is to couple a one-dimensional (1D) semiconducting segment with spin-orbit interaction to a superconductor, in the...doctoral thesis 2023
- document
-
Sattari, R. (author), Hu, D. (author), Liu, X. (author), van Zeijl, H.W. (author), Vollebregt, S. (author), Zhang, Kouchi (author)The rapid development of power electronics has challenged the thermal integrity of semiconductor packaging. Further developments in this domain can be supported significantly by utilizing fast and flexible thermal characteristic evaluation. This study employs the transient dual interface method (TDIM) to characterize and compare the thermal...journal article 2023
- document
-
Sierra Soraluce, A. (author), Li, G. (author), Santofimia, Maria Jesus (author), Molina-Aldareguia, J. M. (author), Smith, A. (author), Muratori, M. (author), Sabirov, I. (author)Quenching and partitioning (Q&P) treatment has been proven effective in manufacturing advanced high strength steels with high content of retained austenite, showing the improved balance of high strength and sufficient ductility. This method has been very well elaborated for carbon steel processing over the last two decades. Though it can...journal article 2023
- document
-
Lips, Silvia (author), Tsap, Valentyna (author), Bharosa, N. (author), Krimmer, Robert (author), Tammet, Tanel (author), Draheim, Dirk (author)In the management of national electronic identity (eID) infrastructure, cooperation between public and private parties becomes more and more important, as the mutual dependencies between the provision of e-services and the provision of the national public key infrastructure (PKI) continuously increases. Yet, it is not clear which key factors...journal article 2023
- document
-
Lyu, Tianshuai (author), Dorenbos, P. (author), Wei, Zhanhua (author)Developing X-ray charged dosimeters with excellent charge carrier storage capacity and stability is challenging. Such energy storage dosimeters have fascinating use in developing novel applications, for instance, in radiation detection, advanced multimode anti-counterfeiting, and flexible X-ray imaging of curved objects. Herein, novel LiTaO...journal article 2023
- document
-
Liu, M. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Borisov, E. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)Electrochemical tests and surface analysis measurements were performed to study the corrosion behavior in a 0.9 wt.% NaCl solution at 37 °C of three NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF). The passive film characteristics and corrosion resistance of L-PBF NiTi showed different features as a function of their...journal article 2023
- document
-
Firouzi, A. (author), Yazdani, S. (author), Tavangar, R. (author), Shakerifard, B. (author), Khan MD, F. (author)In the present study, the fracture toughness of hardened and tempered powder metallurgical (PM) high-speed steel ASP 2030 was investigated using notched and unnotched bending specimens and the finite element method. The normal flexural strength of notched and unnotched specimens marquenched by austenitizing at 1150, 1170, and 1185°C, followed...journal article 2023
- document
- Romijn, J. (author) doctoral thesis 2022
- document
-
van Beek, Max (author)In recent decades Europe has been increasing its demand and consumption of electronics. This has in turn resulted in major outflows of waste electronics (WEEE) that are usually not properly dealt with. This is especially the case for low to medium grade printed circuit boards (PCBs) which unlike higher grade electronics such as computers are...master thesis 2022
- document
-
Cerviño Fungueiriño, David Cervino (author)Quantum computers exploit the quantum behavior of quantum bits (qubits) that are typically operated at cryogenic temperature. Qubits require an electronic control interface. Nowadays, such classical electronic controllers use bulky instruments operated far fromthe qubits outside the cryostat. To run practical quantum algorithms, thousands to...master thesis 2022
- document
-
Hsu, C. (author)This dissertation presents the experimental work on singlemolecule charge transport, particularly on the aspects of spin and orbital conformational effects in singlemolecule junctions. In this dissertation, we employ and develop various singlemolecule techniques, the mechanically controlled break junction (MCBJ), thermoelectric electromigrated...doctoral thesis 2022
- document
-
Burghoorn, Niels (author)Medical technology has seen great progress over the last centuries, developing increasingly more specialised therapy to benefit human health. The rise of the pharmaceutical industry and the research it drives are contributors to this success. However, in humanity's attempt to tackle more and more complex health issues, the conventional methods...master thesis 2022
- document
-
Lane, R. (author)Multi-modal imaging techniques have become essential for better understanding fundamental questions in cell biology such as disease progression. While individual microscopy methods have rapidly advanced in recent years, the information content of any one imaging technique is limited to the type of contrast that particular technique is sensitive...doctoral thesis 2022
- document
-
Rejali, R. (author)This thesis focuses on possible platforms for a bottom-up approach towards realizing and characterizing atomically assembled magnetic and electronic artificial lattices. For this, we make use of the scanning tunneling microscope (STM), which provides a local probe of the magnetic and electronic properties of the sample and allows for the atom-by...doctoral thesis 2022
- document
-
van der Sande, Robin (author)With the increasing appearance of DC loads and DC sources in the MVAC distribution grids, the need for DC power systems is getting more and more pronounced. As a result, the MMC has become a promising and innovative technology that can serve as the interface between a DC and AC network. The MMC-based MVDC distribution link is one of the...master thesis 2022
- document
-
Fu, Y. (author)When high-temperature steels are loaded under under industrially relevant conditions not only creep (i.e. a time dependent strain increase even under nominally constant loading conditions) occurs, but also local damage is formed. At relatively short exposure times quasi-spherical micron-sized cavities form preferentially at the grain boundaries...doctoral thesis 2022
- document
-
Valentin, Mick (author)For decades supermarkets have been seen as very conservative. However, it seems that food retailers are increasingly taking a proactive role in implementing new technologies in the food retail, shaping decision-making process from their own sales perspective. This research aims to identify the preferences of different technology implementation...master thesis 2022