Condensation du NH₃ / H₂O avec des concentrations massiques entre 80% et 96%: étude expérimentale dans un échangeur de chaleur à plaque

High concentration NH₃/H₂O is suitable for Kalina cycles used for the recovery of low grade heat. Plate heat exchangers (PHEs) are compact and reduce the charge of working fluid. This paper investigates the condensation of NH₃/H₂O with NH₃ mass concentrations of 80%-96%. The vapor and...

The performance of a weir-mounted tidal turbine: An experimental investigation

The tidal flow between bridge pillars and through open barriers is a promising source of ocean energy which can be exploited using tidal stream turbines, as proven recently by operational demonstration plants. The aim of this study is to clarify the consequences for the power output of tidal turbines when placing them in a hydraulic structure...

Analysis of elastoplastic response of maritime structures in breaking waves using a double pendulum with a friction hinge

Waves impacting on maritime structures can cause damage which endangers the environment around these structures. Due to high hydrodynamic loading, structures can enter the plastic regime, resulting possibly in structural failure. The understanding of the principles related to this structural failure due to waves is a key concept in this research...

External surface cracked offshore steel pipes reinforced with composite repair system subjected to cyclic bending: An experimental investigation

In this paper, we experimentally studied the external surface crack growth in steel pipes reinforced with Composite System Repaired (CRS). CRS reinforced surface cracked API 5L X65 pipes were tested, containing three initial notch sizes and four reinforcement schemes. During the tests, the crack growth results, as well as the strain on the...

NH₃ condensation in a plate heat exchanger: Experimental investigation on flow patterns, heat transfer and frictional pressure drop

This paper investigates NH₃ condensation in a plate heat exchanger by visualizing the flow patterns and measuring heat transfer coefficients and frictional pressure drop. Visualization experiments were conducted between 20 and 100 kgm⁻²s⁻¹. Full film flow takes place at large mass fluxes and intermediate mass...

Resistance of cold-formed high strength steel angles

This paper describes a study of the behaviour of cold-formed high strength steel angles. Thirty-six specimens with different cold-formed angles (90°, 100°, 120°, 140°, 160°, and 170°) and different thicknesses (4 mm and 6 mm) were considered. The initial geometric imperfections of the specimens were determined using the 3D laser scanning...

Influence of cold-formed angle on high strength steel material properties

This paper describes a study of the S650 high strength steel material properties including the effect of cold-formed angle. Coupon specimens with different cold-formed angles (90°, 100°, 120°, 140°, 160°and 180°) and different thicknesses (4 mm and 6 mm) were examined. Relationships between cold-formed angle and yield stress as well as...

Laminated connections for structural glass components: a full-scale experimental study

The use of glass material for structural components has drastically increased in the last decade. Among others, a laminated connection is a type of adhesive joint that makes use of foil interlayer adhesive to transfer forces between glass and metal parts. In this work, the use of embedded laminated connections is studied as connection between...