Dynamic continuous fiber optical strain sensing for damage diagnosis on beam-like composite structures: An experimental and numerical study

The objective of this master project is to improve the current SHM techniques for global damage identification of beam-like composite structures. The studied damage diagnosis method is based on structural vibrations from which the modal parameters are obtained. The literature study provides an overview of the most common vibration-based damage...

The Influence of Negative Skin Friction on the Bearing Capacity of Timber Piles in Amsterdam

This research looked into the influence of negative skin friction on timber piles in Amsterdam. Tensile load tests were performed on new, instrumented timber piles at Overamstel in Amsterdam. The negative skin friction calculated from the test data was compared to the negative skin friction from NEN 9997-1 for a single pile. The test results...

A method for determining the position of FBG sensors accurately

Fibre Bragg grating sensors have gained a lot of attention in damage detection and strain measurement applications in the past few decades. These applications include matrix crack detection and delamination tip monitoring in composite structures, crack detection in concrete and civil engineering structures and etc. The damage localisation...

Advanced signal processing techniques for fibre-optic structural health monitoring

Fibre optic sensors can measure a range of physics and chemical parameters. Some of the more common fibre optic sensors are the fibre Bragg grating (FBG), the long period grating (LPG), the Fabry-Pérot Interferometer (FPI) and various distributed fibre optic sensors based on optical time-domain reflectometry (OTDR) and optical frequency domain...