A 120.9-dB DR Digital-Input Capacitively Coupled Chopper Class-D Audio Amplifier

This article presents a digital-input class-D amplifier (CDA) achieving high dynamic range (DR) by employing a chopped capacitive feedback network and a capacitive digital-to-analog converter (DAC). Compared with conventional resistive-feedback CDAs driven by resistive or current-steering DACs, the proposed architecture eliminates the noise...

The Zoom ADC: An Evolving Architecture

Zoom ADCs combine a coarse SAR ADC with a fine delta-sigma modulator (?SM) to efficiently obtain high energy efficiency and high dynamic range. This makes them well suited for use in various instrumentation and audio applications. However, zoom ADCs also have drawbacks. The use of over-ranging in their fine modulators may limit SNDR, large...

A 0.9-V 28-MHz Highly Digital CMOS Dual-RC Frequency Reference With ±200 ppm Inaccuracy From -40 °C to 85 °C

This article presents an energy-efficient dual- RC frequency reference intended for wireless sensor nodes. It consists of a digital frequency-locked loop (FLL) in which the frequency of a digitally controlled oscillator (DCO) is locked to a temperature-independent phase shift derived from two different RC poly-phase filters (PPFs). Phase...

A - 121.5-dB THD Class-D Audio Amplifier With 49-dB LC Filter Nonlinearity Suppression

Class-D audio amplifiers produce electromagnetic interference (EMI), which often needs to be suppressed by an external LC filter. However, due to component nonlinearity, this filter can itself cause significant distortion. This article presents a class-D amplifier that suppresses LC filter nonlinearity by 49 dB and is robust to ±30%...

A 5800-μm² Resistor-Based Temperature Sensor with a One-Point Trimmed Inaccuracy of ±1.2 °c (3σ) from -50 °c to 105 °c in 65-nm CMOS

This letter describes a compact resistor-based temperature sensor intended for the thermal monitoring of microprocessors and DRAMs. It consists of an RC poly phase filter (PPF) that is read out by a frequency-locked loop (FLL) based on a dual zero-crossing (ZC) detection scheme. The sensor,fabricated in 65-nm CMOS,occupies 5800 μm²...

A 5800-μ m ₂Resistor-Based Temperature Sensor with a One-Point Trimmed Inaccuracy of ±1.2 °c (3σ) From-50 °c to 105 °c in 65-nm CMOS

This letter describes a compact resistor-based temperature sensor intended for the thermal monitoring of microprocessors and DRAMs. It consists of an RC poly phase filter (PPF) that is read out by a frequency-locked loop (FLL) based on a dual zero-crossing (ZC) detection scheme. The sensor, fabricated in 65-nm CMOS, occupies 5800 μ m2 and...

A Compact Resistor-Based CMOS Temperature Sensor With an Inaccuracy of 0.12 °C (3σ) and a Resolution FoM of 0.43 pJ·K² in 65-nm CMOS

This paper presents a compact resistor-based CMOS temperature sensor intended for dense thermal monitoring. It is based on an RC poly-phase filter (PPF), whose temperature-dependent phase shift is read out by a frequency-locked loop (FLL). The PPF's phase shift is determined by a zero-crossing (ZC) detector, allowing the rest of the FLL to be...

A 4 GHz Continuous-Time ΔΣ ADC With 70dB DR and -74dBFS THD in 125MHz BW

A 4 GHz third-order continuous-time ΔΣ ADC is presented with a loop filter topology that absorbs the pole caused by the input capacitance of its 4-bit quantizer and also compensates for the excess delay caused by the quantizer's latency. The ADC was implemented in 45 nm-LP CMOS and achieves 70 dB DR and -74 dBFS THD in a 125 MHz BW, while...

A Temperature-to-Digital Converter Based on an Optimized Electrothermal Filter

This paper describes the design of a CMOS temperature-to-digital converter (TDC). It operates by measuring the temperature-dependent phase shift of an electrothermal filter (ETF). Compared to previous work, this TDC employs an ETF whose layout has been optimized to minimize the thermal phase spread caused by lithographic inaccuracy. To minimize...

Interface Electronics for a CMOS Electrothermal Frequency-Locked-Loop