Searched for: subject%3A%22filters%22
(1 - 9 of 9)
document
Tanis, Tobias (author)
Autonomous orbit determination could help reducing the growing load on ground-based deep space networks. For small satellites, orbit determination based solely on inter-satellite measurements could be a strong alternative for conventional ground-based navigation support. The possibilities of this autonomous orbit determination method are...
master thesis 2022
document
ten Klooster, Fons (author)
Research in passive Heating, Ventilation, and Air Conditioning (HVAC) systems has gained traction over the last few years. Although passive HVAC is not a new concept, advances in environment sensing, control methods, and hardware have made it a more viable method. Some difficulties still exist, such as optimal sensor placement and optimal...
master thesis 2022
document
Kongurai, Krit (author)
State estimation (SE) is a crucial tool for power system state monitoring since the control center requires a process to deal with a large number of imprecise measurements. Several SE methods have been applied and developed for the electric power system in the transmission level in the past several decades. Meanwhile, SE for the distribution...
master thesis 2021
document
Suresh Kumar, Nivas Kumar (author)
In research, the overall power production in a wind farm is typically increased by employing model-based wind farm control. A controller, in an open-loop setting, operates based on the velocity of the wind flow, predicted by a wind farm model. For a controller to achieve the desired level of power production, a wind farm model has to be accurate...
master thesis 2018
document
de Vries, Bob (author)
Objective: Estimators to accurately monitor ventricular relaxation, cardiac contractility and cardiac output (CO) during support of a left ventricular assist device (LVAD), based on the left ventricular pressure (LVP) and pump-intrinsic signals, were developed. The aim was to continuously monitor these cardiac parameters, hereby tracking the...
master thesis 2018
document
Vos, Jacco (author)
Haptic shared control (HSC) is a method to combine the abilities of humans and machines, in which human and automation jointly exert forces on an input device. According to human-centered design, the underlying controller for HSC should closely resemble human behavior. This paper aims to continuously adapt HSC based on an online identified...
master thesis 2018
document
Stijnman, Marco (author)
Offshore excavators are large hydraulically driven machines which are difficult to control due to slow dynamics, inherent nonlinearities, a varying environment and complex kinematics. As digging is performed under water, only limited visual feedback of the task can be provided by means of a visualization interface. Operators require an extensive...
master thesis 2017
document
Keemink, H. (author)
With the advent of smart thermostats like Toon®, detailed information about operation and usage of central heating boilers has become easily available. However, this information is not used in a systematic way by most companies including Eneco, and the wealth of information within is not available to the users. This has a few drawbacks. For...
master thesis 2016
document
Struijk, M. (author)
Four Wheel Drive (4WD) vehicles are almost as old as the automobile itself, however for more than half a century the main use case of a 4WD system was to improve traction on off-road terrains. The advancement in technology over the recent decades resulted in more advanced and light weight solutions shifting the focus more towards sports cars and...
master thesis 2015
Searched for: subject%3A%22filters%22
(1 - 9 of 9)