Searched for: subject%3A%22front%255C-end%22
(1 - 20 of 58)

Pages

document
Lemmen, Danny (author)
Aviation Maintenance Repair and Overhaul (MRO) organisations are facing a lack of sustainable alternatives within MRO, which could aid a more sustainable operation geared to meet short-term climate regulations. Hence, they need to establish an idea evaluation process, allowing organisations to assess and prioritise generated ideas to assess...
master thesis 2022
document
Mohammad Zaki, A.R. (author), Nihtianova, S. (author)
Particle detection circuits are used for a wide range of applications from experimental physics to material testing and medical imaging. In the state-of-The-Art systems, the trend is to design low-noise and low-power readout front-end electronics with a low detection error rate and small silicon area occupation. This paper presents the design...
conference paper 2022
document
Mohammad Zaki, A.R. (author), Nihtianova, S. (author)
This article presents the experimentally characterized performance of a low noise and wideband sensor readout integrated circuit (ROIC). The ROIC is designed to detect small amounts of charge generated by a silicon p-i-n detector as a result of particle detection, with very high time resolution and limited power consumption. The architecture...
journal article 2022
document
Patra, B (author)
Quantum computers can provide exponential speedup in solving certain computational problems pertaining to drug discovery, cybersecurity, weather forecasting, etc. Although a quantum computer with just 50-qubits has been shown to surpass the computing power of the best supercomputers in specific applications, millions of qubits would be required...
doctoral thesis 2021
document
Melissant, Suze (author)
To stay relevant and beat the competition, corporate organisations must innovate disrtupively. Within the financial services industry, it proves hard to remain competitive and stay relevant in a rapidly changing environment. In response to this, Group Innovation was established as the innovation department of ABN AMRO to...
master thesis 2021
document
Chen, C. (author), Pertijs, M.A.P. (author)
As medical ultrasound imaging moves from conventional cart-based scanners to new form factors such as imaging catheters, hand-held point-of-care scanners and ultrasound patches, there is an increasing need for integrated transceivers that can be closely integrated with the transducer to provide channel-count reduction, improved signal quality...
journal article 2021
document
van Willigen, D.M. (author), Kang, E. (author), Janjic, Jovana (author), Noothout, E.C. (author), Chang, Z.Y. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author)
This article presents an application-specific integrated circuit (ASIC) designed for intra-vascular ultrasound imaging that interfaces 64 piezoelectric transducer elements to an imaging system using a single micro-coaxial cable. Thus, it allows a single-element transducer to be replaced by a transducer array to enable 3-D imaging. The 1.5-mm...
journal article 2021
document
Ahmed, Sheeraz (author), Aubry, P.J. (author), Yarovoy, Alexander (author)
In this paper, a novel multi-channel waveform agile radar testbed - ASTAP (Advanced Space-Time Adaptive Processing) with eight transmit channels and a single receive channel to form a co-located Multiple-Input Single-Output (MISO) radar is presented. Based on current configuration, the ASTAP radar system possesses agility for synthesizing and...
conference paper 2021
document
Aydin, E. (author), Makinwa, K.A.A. (author)
This paper presents a portable and contactless microfluidic flowmeter based on the Nuclear Magnetic Resonance (NMR) principle, which can measure flow rates up to 2.7 ml/min with \pm 16\ lmin (±0.6% full-scale) error. It consists of a millimeter-size RF coil wound around a microfluidic channel, custom readout electronics and a 0.5 T permanent...
conference paper 2021
document
Arensman, Esther (author)
In a time where themes such as sustainability highly influence the built environment, it becomes ever more important that construction projects achieve strategic success. For securing a project’s long-term strategic success, the importance of the front-end phase is increasingly recognised. In the front-end, fundamental decisions are made under...
master thesis 2020
document
Pathak, Atul (author)
Cost overruns in infrastructure projects has been a well-known phenomenon for almost a decade. As per the generally accepted definition, the industry has been measuring cost overruns as the cost exceedance with respect to the approved contractor’s budget. But researchers are realizing the fact that the decision-to-build is generally taken long...
master thesis 2020
document
Helbing, Adam (author)
This thesis describes my Master graduation project in which I attempt to design a Key Performance Indicator (KPI) for Strategic Designers, to enable us to justify and explain our efforts in a quantitatively oriented context, such as a corporate setting.<br/>In the end, this project provides multiple novel perspectives to knowledge about...
master thesis 2020
document
Buijnsters, J.L. (author), Hofman, D. (author), Klein Kranenbarg, J.G.P. (author), El Moussaoui, C. (author), Zheng, K. (author)
ScenWise is an innovative company that specializes in data science revolving around traffic management. ScenWise strives to use the newest and best technologies and practices when it comes to web applications, data science and traffic management. The reason for this is that they provide tools to analyse and visualise a variety of situations that...
bachelor thesis 2020
document
Baarslag, Bram (author)
Telework has tremendous potential benefits that can be the solution for problems as traffic jams, work-life conflict and even the environment. But there are still numerous obstacles that need to be overcome for telework to live up to its full potential. The proposed solution to overcome these problems is by developing more ‘human’ solutions,...
master thesis 2020
document
van Willigen, D.M. (author), Mozaffarzadeh, M. (author), Noothout, E.C. (author), Verweij, M.D. (author), de Jong, N. (author), Pertijs, M.A.P. (author), Daeichin, V. (author)
This paper presents the integration steps towards a prototype forward-looking intra-vascular ultrasound probe. An ASIC (Application Specific Integrated Circuit) is laser cut to create a 1.6mm circular shaped die that can be integrated at the tip of a small catheter. The ASIC is designed such that it can be used to transmit and receive on 64...
conference paper 2019
document
Mohanta, Shibani (author)
Fuzzy front-end innovation (FFEI) is the most challenging and unmanageable stage of new product development. This is due to the uncertain and dynamic nature of product, market and consumer knowledge related to innovation. Value proposition creation (VPC) process is a part of FFEI. The scope of the research of this thesis is from VPC kick-off...
master thesis 2019
document
Jalali Sohi, A. (author), Bosch-Rekveldt, M.G.C. (author), Hertogh, M.J.C.M. (author)
Purpose: The purpose of this paper is to study the effect of project management flexibility in early project phases on end-project performance including its mediating role on the effect of complexity over project performance. Design/methodology/approach: Out of 13 hypotheses, 6 hypotheses regarding the relationships between areas of...
journal article 2019
document
van Zoest, S.P. (author), Volker, L. (author), Hermans, M.H. (author)
Purpose: The purpose of this paper is to address the barriers that Dutch housing associations encounter in implementing new procurement strategies. Design/methodology/approach: Several aspects of purchasing, portfolio management, project delivery and supply management are discussed in relation to the changing role of housing associations as...
journal article 2019
document
Liu, Y. (author), van Marrewijk, A.H. (author), Houwing, E.J. (author), Hertogh, M.J.C.M. (author)
There has been recent academic interest in programs as value creation processes. Scholars focus particularly on the front end of programs as opportunities for clients to create value. At the front end, client and market partners can actively co-produce value through co-creation sessions. This paper investigates what stakeholders do in co...
journal article 2019
document
Kun, P. (author), Mulder, I. (author), Kortuem, G.W. (author)
The current work elaborates upon a Generative Data Exploration method, which is a design technique aiming at supporting designers in integrating data in their design activities. Digital data offers new opportunities in all sort of professional domains, yet existing approaches and tools to manipulate data are predominantly targeted at data...
conference paper 2018
Searched for: subject%3A%22front%255C-end%22
(1 - 20 of 58)

Pages