Searched for: subject%3A%22heating%22
(1 - 20 of 903)

Pages

document
Yan, R. (author)
High-strength steel (HSS) has higher strength but lower ductility than mild steel. The cross-section of the structural members may be reduced using HSS instead of mild steel, provided the buckling of elements does not govern the failure. The reduced member size benefits the environment and economy by means of less energy consumption, less carbon...
doctoral thesis 2023
document
QIU, Haodong (author)
Hybrid structures consisting of FRP(fiber reinforce polymer) composite decks<br/>connected to a steel girder superstructure are gaining more attention by combining the stiffness of steel members with good fatigue endurance and high strength to weight ratio of FRP. However, when composite material FRP is exposed to elevated temperature,...
master thesis 2023
document
van Loo, Julian (author)
Energy poverty is an increasingly important issue. While vulnerable households are especially at risk in the energy transition, energy poverty effects of the transition are unknown. In Delft, a district heating network based on geothermal energy is planned. The distributive justice aspects of heat networks in the heating transition remain...
master thesis 2023
document
DASOPOULOS, DIONYSIOS (author)
Thick-section high strength steels (HSS) are widely used in engineering applications with requirements of high toughness and strength. Structural components are commonly joined by welding, known to significantly degrade the mechanical properties of steel due to changes in microstructure (e.g., grain size coarsening and martensite-austenite (M-A)...
master thesis 2023
document
Dekker, Victor (author)
Due to financial and environmental benefits, the interest in high-temperature heat pumps, producing heat sinks above 100 °C, is rising. Research is intensifying, and technology is developing fast. However, of all the components of the heat pump cycle, the oil management system seems to be the least investigated, even though 12% of the faults in...
master thesis 2023
document
Wahi, P. (author), Konstantinou, T. (author), Tenpierik, M.J. (author), Visscher, H.J. (author)
Lower temperature heating (LTH) involves using the lowest possible supply temperatures to meet residential heating demands, thus supporting the integration of sustainable heating sources and decarbonising the existing residential stock. However, choosing appropriate energy renovation options to prepare existing dwellings for LTH presents...
review 2023
document
Wang, Y. (author), Hosseinimehr, S.M. (author), Marelis, A.A. (author), Hajibeygi, H. (author)
We develop a multiscale simulation strategy, namely, algebraic dynamic multilevel (ADM) method, for simulation of fluid flow and heat transfer in fractured geothermal reservoirs under varying thermodynamic conditions. Fractures with varying conductivities are modeled using the projection-based embedded discrete fracture model (pEDFM) in an...
journal article 2023
document
van den Engel, P.J.W. (author), Malin, Michael (author), Venkatesh, Nikhilesh Kodur (author), de Araujo Passos, L.A. (author)
This research evaluates the performance of a Phase Change Material (PCM) battery integrated into the climate system of a new transparent meeting center. The main research questions are: a. “Can the performance of the battery be calculated?” and b. “Can the battery reduce the heating and cooling energy demand in a significant way?” The first...
journal article 2023
document
van Veldhuizen, B.N. (author), van Biert, L. (author), Amladi, A. (author), Woudstra, T. (author), Visser, K. (author), Aravind, P.V. (author)
An increasing demand in the marine industry to reduce emissions led to investigations into more efficient power conversion using fuels with sustainable production pathways. Solid Oxide Fuel Cells (SOFCs) are under consideration for long-range shipping, because of its high efficiency, low pollutant emissions, and fuel flexibility. SOFC systems...
journal article 2023
document
Chi, Lin (author), Lu, Shuang (author), Li, Z. (author), Huang, Chendong (author), Jiang, Hui (author), Peng, Bin (author)
As an industrial by-product containing pozzolanic components, recycled ferronickel slag (FNS) has the potential to be supplementary cementitious materials (SCMs) to reduce the massive carbon footprint of the cement industry, however, the main limitation of ferronickel slag as SCMs is the low hydration rate at an early age. In this study, the...
journal article 2023
document
Opolot, Michael (author), Zhao, Chunrong (author), Keane, Partrick F. (author), Liu, Ming (author), Mancin, Simone (author), Bruno, Frank (author), Hooman, K. (author)
Thermal energy storage is increasingly needed in a sustainable world because of its potential of capturing waste heat and being incorporated in solar power plants. For power generation, in particular, as turbine technology advances, a demand for higher temperature thermal energy storage materials also grows. For this purpose, latent thermal...
journal article 2023
document
Chandra, D. (author), Bakshi, Tuli (author), Bahadur, Jitendra (author), Hazra, Bodhisatwa (author), Vishal, Vikram (author), Kumar, Shubham (author), Sen, Debasis (author), Singh, T. N. (author)
A combination of high-resolution imaging, low-pressure gas adsorption, and small-angle X-ray and neutron scattering quantifies changes in the pore characteristics of pulverized shale samples under oxic and anoxic environments up to 300 ℃. Clay-rich early-mature shales have a fair potential to generate hydrocarbons, the total organic carbon...
journal article 2023
document
Yan, R. (author), Mela, Kristo (author), Yang, Fei (author), El Bamby, H. (author), Veljkovic, M. (author)
A welded connection consists of three main material zones, the base material (BM), the heat-affect zone (HAZ), and the weld metal (WM). The strength of HAZ depends on the BM grade and manufacturing process, electrode grade, and welding parameters. Under certain conditions, HAZ has the lowest material strength, especially for high-strength...
journal article 2023
document
Wang, J. (author), Yan, Xin ping (author), Boersma, B.J. (author), Lu, Ming jian (author), Liu, Xiaohua (author)
Printed circuit heat exchangers (PCHE) are designed to improve heat recovery and energy saving in supercritical CO<sub>2</sub> (S-CO<sub>2</sub>) power cycles. In the current study, a modified channel PCHE is proposed based on the regular straight channel and a zigzag channel. The thermal–hydraulic performance of four different types of PCHE...
journal article 2023
document
de Araujo Passos, L.A. (author), Ceha, T.J. (author), Baldi, S. (author), De Schutter, B.H.K. (author)
Controlling the operation of HVAC (Heating, Ventilation, and Air-Conditioning) systems is arguably the most effective way to reach desired indoor conditions in buildings. Nevertheless, such control may involve complex dynamics when dealing with passive energy technologies. In this paper, we focus on maximizing the passive operation of HVAC in...
journal article 2023
document
Noel, L.F.P. (author), Maute, K. (author)
Solving conjugate heat transfer design problems is relevant for various engineering applications requiring efficient thermal management. Heat exchange between fluid and solid can be enhanced by optimizing the system layout and the shape of the flow channels. As heat is transferred at fluid/solid interfaces, it is crucial to accurately resolve...
journal article 2023
document
Khan, Umara (author), Zevenhoven, Ron (author), Stougie, L. (author), Tveit, Tor Martin (author)
Heat pumps (HPs) which use low temperature (waste) heat and renewable energy sources to provide high temperature heat are widely regarded as a critical technology for reducing carbon dioxide emissions in the industrial sector. The HighLift technology considered here can provide high temperature output heat up to around 200 °C. This article...
journal article 2023
document
Harandi, Ali Nazemi (author), Eslami, Abdoulmajid (author), Bahrami, Abbas (author), Bakhtafrouz, Asghar (author), Yazdan Mehr, M. (author)
This study presents a failure analysis in two reformer tubes used for hydrogen production in a petrochemical industry. These tubes (Tube A and Tube B) were made by the centrifugal casting of HP-Nb alloy in such a way that one contained titanium as a micro-element, and the other was free from titanium in its chemical composition. Although the two...
journal article 2023
document
Zhao, Jiale (author), Yang, Fu Qiang (author), Guo, Yong (author), Ren, X. (author)
As the shallow mineral resources are nearly depleted, the mining of deep resources has become an urgent problem to be studied. The increase in mine depth can lead to the increase of mine heat hazard, which is a critical concern for mining safety/occupational health and safety. However, there are limited review articles available regarding the...
review 2023
document
Dumont, Marina (author), Wang, Ranran (author), Wenzke, Diana (author), Blok, K. (author), Heijungs, Reinout (author)
High-temperature heat pumps (HTHPs) are an emerging technology to improve overall process efficiency and reduce energy demand while enabling a switch from fossil fuels to renewable electricity. New industrial HTHP technologies aim to achieve an output heat temperature of 250 °C, suitable for decarbonising the food and beverages industry...
journal article 2023
Searched for: subject%3A%22heating%22
(1 - 20 of 903)

Pages