- document
-
Delil, A.A.M. (author)A uniaxial model for the transient performance of gas-loaded variable conductance heat pipes is being developed, partly under contract with the Netherlands Agency for Aerospace Programs NIVR. The model has to be easily implementable in existing spacecraft thermal analyzer computer programs. So far, a steady-state version of the model is...report 1984
- document
- Delil, A.A.M. (author), Daniels, H.A.M. (author) report 1983
- document
-
Delil, A.A.M. (author)Radiation heat transfer is a non-negligible physical process in an open-cycle magnetohydrodymic generator. It constitutes an important part of the energy conservation law, one of the fundamental equations describing the behaviour of the MHD combustion gas in the generator. Radiation heat transfer is modelled following the generally accepted...report 1983
- document
-
van den Assem, D. (author), Bunk, P.B. (author)Preliminary experiments have been performed with a laboratory model of an electro-osmotic heat pipe filled with ethanol. With dismounted electro-osmotic pump, the heat transport through the pipe and the temperature distribution along the pipe wall have been measured. The measurements have been performed as a function of the temperature...report 1983
- document
-
't Hart, W.G.J. (author), Schra, L. (author)A comparative experimental investigation was done on the advanced plate alloys 7010-T651 from ALCAN and 7150-T6E189 from ALCOA. The mechanical properties, fracture toughness and corrosion properties were determined. The most notable finding was the excellent fracture toughness of alloy 7150-T6E189 combined with a high tensile strength. The...report 1982
- document
-
't Hart, W.G.J. (author), Kolkman, H.J. (author), Schra, L. (author)The Jominy end-quench test was applied to rods of the alximinium alloys T010 and X TO9I to obtain a decreasing cooling rate over the length of the rods. After heat treating to a high strength T6 and an overaged TT condition the corrosion properties and the microstructure were determined related to the cooling rate. No influence of cooling rate...report 1982
- document
-
Kolkman, H.J. (author)Coarsening and solutioning of the main strengthening phase for the majority of superalloys, the y' phase, are discussed. It is shown that a general prediction of coarsening rates and solutioning temperatures is possible.report 1981
- document
-
Mom, A.J.A. (author)This paper consists of two parts. In the first part, concerning operational conditions in gas turbines, the following topics are covered: - the magnitude of temperatures, temperature profiles, and stresses in various components - transient temperature conditions, occuring as a result of e.g. throttle setting changes and affecting thermal fatigue...report 1981
- document
-
't Hart, W.G.J. (author), Kolkman, H.J. (author), Schra, L. (author)The Jominy end-quench test was applied to extruded rods of the aluminium alloys 2024 and 7075 to obtain a decreasing quench rate over the length of the rods. Subsequently the alloys were heat treated to the conditions: 2024-T4, 2024-T6, 7075-T73. A corrosion investigation and a transmission electron microscopy investigation were performed to...report 1980
- document
-
van der Vooren, J. (author), Sanderse, A. (author)A uniaxial flat front--"theory is presented for a gas loaded variable conductance heat pipe. The theory takes into account the inertial effects of the moving vapour, which can grow large under certain circumstances, but neglects the axial heat conduction of the wall and wick. A limited number of numerical examples indicates excellent agreement...report 1980
- document
-
van der Vooren, J. (author), Delil, A.A.M. (author), Sanderse, A. (author)A new uniaxial model for a gas loaded variable conductance heat pipe (VCHP) is developed. This model takes into account the diffusion at the vapour-gas interface as well as the inertial effects of the moving vapour. Only steady-state conditions are considered. The generally accepted Edwards /Marcus model will be shown to be a first order...report 1980
- document
- van den Assem, D. (author), Daniels, D.H.W. (author) report 1978
- document
-
van der Vet, W.J. (author)Military aircraft flying low level missions in Western Europe encounter a very different environment from that in most of the United States. Industrial pullution causes atmospheric moisture to be highly acid, and the corrosion rate of jet engine components is greatly increased, with consequent high maintenance costs. To help combat this problem...report 1977
- document
-
Schra, L. (author), van Leeuwen, H.P. (author)The influence of previous corrosion on the fatigue life was investigated. It was foimd that a slight corrosive attack could drastically reduce the fatigue life. The damaging effect of corrosion was greater for the alloy AA 7050 than for AZ 74.61. It could be established that fatigue cracks initiated from various corrosion pits. A second series...report 1977
- document
-
Schra, L. (author), van Leeuwen, H.P. (author), Meulman, A.E. (author)The fatigue crack propagation performance of the alloy AZ 74.61 under manoeuvre spectrum loading was studied. The crack propagation behaviour was also compared with that of the American forging alloy AA 7050, not only for simulated manoeuvre loading but also for simulated gust loading and programme loading. It was found that, at comparable...report 1976
- document
-
Delil, A.A.M. (author)The scope of this report is: - to give a short description of the possible operation principles and applications of heat pipes - to derive the governing equations for a model of a conventional heat pipe (including the limits to the heat transfer capability) - to describe the theoretical derivation of the formulae for the various thermal...report 1976
- document
-
Delil, A.A.M. (author), Heemskerk, J.F. (author)The thermal performance of multilayer insulation hlankets depends on three (interacting) modes of energy transfer: radiation between the radiation shields, gas conduction in the residual interstitial gas and solid conduction via the contacting interfaces. The contribution of the gas conduction depends on the interstitial gas and its pressure,...report 1976
- document
-
Schra, L. (author), van Leeuwen, H.P. (author)The effect of variety of heat treatments on various engineering properties was studied with the aim to derive an optimum heat treatment. The engineering properties comprised Vickers hardness, short-time tensile strength, fatigue crack propagation resistance, fracture toughness and stress corrosion resistance. The test results were compared with...report 1976
- document
-
Wanhill, R.J.H. (author)The requirements and problems of high temperature materials in gas turbines are reviewed, with specific reference to turbine discs, blades, vanes and combustion cans. The mechanical and environmental property requirements of these components are discussed, followed by an overview of the types of materials used. Lastly, there is a summary of the...report 1975
- document
-
Delil, A.A.M. (author), Heemskerk, J.F. (author)The thermal performance of evacuated multilayer insulation blankets depends on three modes of energy transfer: radiation between the radiation shields, gas conduction m the residual interstitial gas and solid conduction via the contacting interfaces. The importance of the contributions of the three heat transfer modes depends on many parameters...report 1975