Searched for: subject%3A%22high%255C%2Bpower%22
(1 - 17 of 17)
document
Wijnveen, Calvin (author), van de Luijtgaarden, Raf (author)
In 2018 it was estimated that the aviation industry produced approximately 1.04 billion tons of CO2. This was an estimated 2.5% of the total CO2 emitted that year. In order to slow down global warming, big changes need to be made to the transportation industry. This change has already begun with commercialization of electric cars. The next step...
bachelor thesis 2022
document
Manafu, Marius (author)
The technology of focus in this paper, the applied-field magnetoplasmadynamic (MPD) thruster (AF-MPDT), was developed in the 1960s. However, little research has been conducted for this thruster. There is still the need for an accurate model describing the thruster's functioning, its thrust and the physical phenomenons inside.<br/>This project...
master thesis 2022
document
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Riekerk, C. (author), Grazian, F. (author), Yu, G. (author), Bauer, P. (author)
Due to the urgent desire for a fast, convenient, and efficient battery charging technology for electric vehicle (EV) users, extensive research has been conducted into the design of high-power inductive power transfer (IPT) systems. However, there are few studies that formulate the design as a multiobjective optimization (MOO) research...
journal article 2022
document
Herzog, Alexander (author), Wagner, Max (author), Benkner, Simon (author), Zandi, Babak (author), van Driel, W.D. (author), Khanh, Tran Quoc (author)
We report on the degradation dynamics and mechanisms of the commercially available chip-on-board (COB) high-power light-emitting diode (LED) modules with an electrical power of 175 W. Due to the associated thermal load, the temperature dependence of the aging processes is additionally analyzed within the scope of this work. The aging tests...
journal article 2022
document
Lv, Maolong (author), Chen, Zhiyong (author), De Schutter, B.H.K. (author), Baldi, S. (author)
Prescribed-performance control (PPC) for high-power dynamics with time-varying unknown control coefficients requires to address two open problems: (a) given a Nussbaum function, which properties hold for the power of the Nussbaum function? (b) to avoid high gains, how to design a switching gain that increases only when the tracking error is...
journal article 2022
document
Bootsman, R.J. (author), Mul, D.P.N. (author), Shen, Y. (author), Hashemi, M. (author), Heeres, Rob M. (author), van Rijs, Fred (author), Alavi, S.M. (author), de Vreede, L.C.N. (author)
Fully digital transmitters (DTXs) have the potential of replacing analog-intensive transmitter (TX) line-ups in future massive multiple-input and multiple-output (mMIMO) systems since they hold the promise of higher system integration level and energy efficiency. DTX operation so far has been limited to low RF output powers. This article...
journal article 2022
document
Deng, Shanliang (author)
With the development of biomedical technology such as optogenetics, optoelectronics devices, especially light-emitting diode(LED), becomes wildly used in biomedical researches and applications. Unlike traditional illumination and display applications, biomedical applications have more unique requirements like intensity and response speed. The...
master thesis 2021
document
Sun, Y. (author), Kang, Xuanwu (author), Deng, Shixiong (author), Zheng, Yingkui (author), Wei, Ke (author), Xu, Linwang (author), Wu, Hao (author), Liu, Xinyu (author)
Gallium nitride (GaN) has attracted increased attention because of superior material properties, such as high electron saturation velocity and high electrical field strength, which are promising for high-power microwave applications. We report on a high-performance vertical GaN-based Schottky barrier diode (SBD) and its demonstration in a...
journal article 2021
document
Lutgerink, Jochem (author)
The average worldwide internet traffic demand in 2022 is projected to be over 1200 Terabits per second. A fifth of this data would be transmitted using mobile networks. One of the technologies used for this is radio frequency (RF) telecommunication, but this technology is reaching its limits. Despite ongoing development, typical data rates are...
master thesis 2019
document
Cao, Yufan (author)
Semiconductor lifetime and power density are considered to be two important development directions of power converter design in the future. Especially in some high dynamic application, the operation condition is changing frequently causing the temperature swing of semiconductor, and it leads to thermal expansion and contraction which affects the...
master thesis 2019
document
Urso, A. (author), Giagka, Vasiliki (author), van Dongen, M.N. (author), Serdijn, W.A. (author)
In order to recruit neurons in excitable tissue, constant current neural stimulators are commonly used. Recently, ultra high-frequency (UHF) stimulation has been proposed and proven to have the same efficacy as constant-current stimulation. UHF stimulation uses a fundamentally different way of activating the tissue: each stimulation phase is...
journal article 2019
document
Shekhar, A. (author), Soeiro, Thiago B. (author), Qin, Z. (author), Ramirez Elizondo, L.M. (author), Bauer, P. (author)
An important step in Voltage-Source Modular Multilevel Converter (MMC) design is the selection of adequate semiconductor blocking voltage class. This paper highlights that particularly for grid connected medium voltage applications, the choice of suitable switch blocking voltage class is not so straightforward. The market available switch...
conference paper 2018
document
Denisenkov, V.S. (author), Kiyko, V.V. (author), Vdovin, G.V. (author)
High-power lasers are useful instruments suitable for applications in various fields; the most common industrial applications include cutting and welding. We propose a new application of high-power laser diodes as in-bulk heating source for food industry. Current heating processes use surface heating with different approaches to make the heat...
conference paper 2015
document
Marchetti, M. (author)
This thesis concentrates on the development of advanced large-signal measurement and characterization tools to support technology development, model extraction and validation, and power amplifier (PA) designs that address the newly introduced third and fourth generation (3G and 4G) wideband communication standards. By exploiting an innovative...
doctoral thesis 2013
document
Li, J. (author)
This thesis aims for high power wideband amplifiers suitable for base station instrumentation purposes. A power combing topology is introduced, not only to achieve high power but also good input and output matching. Two kinds of broadband 3-dB quadrature couplers, which are important components in the power combing topology, are designed and...
master thesis 2011
document
Pavlovsk√Ĺ, M. (author)
This thesis is concerned with the possibilities of increasing the power density of high-power dc-dc converters with galvanic isolation. Three cornerstones for reaching high power densities are identified as: size reduction of passive components, reduction of losses particularly in active components and thermal management. In addition to the...
doctoral thesis 2006
document
Young, I.T. (author), Garini, Y. (author), Dietrich, H.R.C. (author), Van Oel, W. (author), Liqui Lung, G. (author)
Traditional light sources for fluorescence microscopy have been mercury lamps, xenon lamps, and lasers. These sources have been essential in the development of fluorescence microscopy but each can have serious disadvantages: lack of near monochromaticity, heat generation, cost, lifetime of the light source, and possible distortions due to...
conference paper 2004
Searched for: subject%3A%22high%255C%2Bpower%22
(1 - 17 of 17)