Searched for: subject%3A%22hybrid%255C+structure%22
(1 - 10 of 10)
document
Weissenburger, Ron (author)
The focus of this thesis is on the phenomenon of the informal settlement and its <br/>informal economy. The location of the graduation project called Tarlabası is an informal settlement in the middle of the city centre of Istanbul. The neighbourhood has been a shelter for the poor, refugees and minorities for generations. The district functions...
master thesis 2023
document
Westerbeek, Elise (author)
Strain hardening cementitious composites (SHCC) can be used to reduce the amount of reinforcement needed to control crack widths. SHCC has a strain hardening behaviour with dense micro-cracking, which makes it more ductile compared to conventional concrete. Conventional concrete can be used in the non-critical locations. An interface is formed...
master thesis 2023
document
Yang, J. (author), Chen, Xiaohong (author), Sun, Yuanxi (author), Feng, Chen (author), Yang, Zheng (author), Zadpoor, A.A. (author), Mirzaali, Mohammad J. (author), Bai, Long (author)
The advent of additive manufacturing has facilitated the design and fabrication of hybrid lattice structures with multiple morphologies. These structures combine multiple distinct architectures into a single structure with an exceptional performance that far exceeds that of each constituting architecture. However, combining strut-based...
journal article 2023
document
Csillag, Fruzsina (author), Pavlovic, M. (author)
The main challenge for realizing competitive hybrid steel-FRP structures, such as bridges, carparks, is to make the steel and FRP components work together. In this study shear resistance, stiffness and ductility of three types of demountable bolted shear connectors are examined. Two blind-bolted M20 shear connectors and a novel, injected...
journal article 2021
document
Harrass, Othman (author)
Strain Hardening Cementitious Composite (SHCC) is a new type of concrete that is able to control the crack-width in concrete structures. The application of this material in the tension zone of hybrid concrete structures is thus of interest in practice. The interfacial behavior for these hybrid structures is something that is of importance for...
master thesis 2020
document
Csillag, Fruzsina (author), Thie, Edwin (author), Pavlovic, M. (author)
Demountable connectors have been rarely applied in steel-FRP hybrid structures due to the lack of research, which could prove their reliable structural performance. In typical applications, e.g. in multi-girder hybrid decks, the connectors are not only subjected to longitudinal shear forces, but also to substantial tensile forces originated...
conference paper 2019
document
Wang, Yue (author), Zhang, Yu (author), Tian, Zhi (author), Leus, G.J.T. (author), Zhang, Gong (author)
This paper develops efficient channel estimation techniques for millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) systems under practical hardware limitations, including an arbitrary array geometry and a hybrid hardware structure. Taking on an angle-based approach, this work adopts a generalized array manifold separation...
journal article 2019
document
Vu Hong, Duong (author)
Research abstract:The world steel demand and production are constantly growing parallelly to the world economic<br/>growth. Even though steel is fully recyclable, there is still a vast amount of virgin production which put<br/>tremendous pressure on the natural scarcity of natural resources. Steel recycling only mitigates the<br/>impacts since...
master thesis 2018
document
Teixeira De Freitas, S. (author), Sinke, J. (author)
The purpose of this research is to study the effect of temperature on the static behavior of an hybrid structure consisting of adhesively bonded Fiber Metal Laminate skin to a composite stiffener. This hybrid structure was tested using stiffener pull-off tests, which is a typical set-up used to simulate the structural behaviour of full-scale...
conference paper 2015
document
Helmerhorst, G.J. (author)
In de huidige praktijk van gebiedsontwikkelingsprojecten vindt het besluitvormingsproces plaats in pluricentrische besluitvormingsarenas, waarin sprake is van interorganisatorische planning. Door de wederzijdse afhankelijkheid tussen de partijen in deze arenas, de daaraan verbonden steeds wisselende partnerschappen en het onbekende eindresultaat...
master thesis 2007
Searched for: subject%3A%22hybrid%255C+structure%22
(1 - 10 of 10)