Searched for: subject%3A%22inverter%255C-based%22
(1 - 17 of 17)
document
Wu, Dan (author), Seo, Gab-Su (author), Xu, Lie (author), Su, Chi (author), Kocewiak, Łukasz (author), Qin, Z. (author)
Offshore wind is expected to be a major player in the global efforts toward decarbonization, leading to exceptional changes in modern power systems. Understanding the impacts and capabilities of the relatively new and uniquely positioned assets in grids with high integration levels of inverter-based resources, however, is lacking, raising...
journal article 2024
document
Boricic, Aleksandar (author), Rueda, José L. (author), Popov, M. (author)
Due to the continuous increase (decrease) in the number of inverter-based (synchronous) generators in modern electrical power systems, the theoretical foundations behind widely used system strength and voltage stability assessment methods require thorough revision. The existing evaluation methods such as the Short-Circuit Ratio (SCR) are often...
conference paper 2023
document
Jegarluei, Mohammad Rezaei (author), Dobakhshari, Ahmad Salehi (author), Popov, M. (author), Terzija, Vladimir (author), Azizi, Sadegh (author)
Increasing penetration of inverter-based resources (IBRs) undermines the performance of conventional protection systems since IBRs’ fault characteristics are fundamentally different from those of synchronous generators. In this paper, a PMU-based backup protection method is proposed for power transmission systems with high penetrations of IBRs....
conference paper 2023
document
Eland, E.N. (author), Mehrotra, Shubham (author), Karmakar, S. (author), van Veldhoven, Robert (author), Makinwa, K.A.A. (author)
Zoom ADCs combine a coarse SAR ADC with a fine delta-sigma modulator (?SM) to efficiently obtain high energy efficiency and high dynamic range. This makes them well suited for use in various instrumentation and audio applications. However, zoom ADCs also have drawbacks. The use of over-ranging in their fine modulators may limit SNDR, large...
book chapter 2023
document
Tang, Z. (author), Pan, S. (author), Grubor, M. (author), Makinwa, K.A.A. (author)
This article presents a sub-1 V bipolar junction transistor (BJT)-based temperature sensor that achieves both high accuracy and high energy efficiency. To avoid the extra headroom required by conventional current sources, the sensor’s diode-connected BJTs are biased by precharging sampling capacitors to the supply voltage and then discharging...
journal article 2023
document
Kragt, Wouter (author)
To be able to cope with the demands of next generation radar applications, a bandwidth of 400MHz is required. The SAR assisted CT ∆Σ ADC provides an energy efficient ADC, but needs improvements to cope with the bandwidth enlargement. This thesis examines the front end components and thus initially focuses on resolving the issues in the front end...
master thesis 2022
document
Boricic, Aleksandar (author), Rueda, José L. (author), Popov, M. (author)
As power systems evolve from synchronous to inverter-based generation, voltage stability plays an increasingly important role. Voltage perturbations become faster and highly variable, and as such attract the research interest in the field of short-term instability monitoring and evaluation. The digitalization of the power systems provides a...
conference paper 2022
document
Boricic, Aleksandar (author), Rueda, José L. (author), Popov, M. (author)
To facilitate the increasing penetration of inverter-based resources, understanding and evaluating system strength becomes one of the central questions for the resilient operation of power systems. However, this is a very challenging and nuanced task, currently without a clear consensus in the industry and academia. This paper provides a...
conference paper 2022
document
Eland, E.N. (author), Karmakar, S. (author), Gonen, B. (author), van Veldhoven, Robert (author), Makinwa, K.A.A. (author)
This article describes a discrete-time zoom analog-to-digital converter (ADC) intended for audio applications. It uses a coarse 5-bit SAR ADC in tandem with a fine third-order delta-sigma modulator (ΔΣM) to efficiently obtain a high dynamic range. To minimize its over-sampling ratio (OSR) and, thus, its digital power consumption, the...
journal article 2021
document
Agarwal, Gayatri (author)
MRI machine has evolved tremendously over the years from its inception in order to render high-quality 3D images, best among its companion imaging systems. Of the whole system, RF receiver is the most crucial for its noise performance, which is expected to provide high SNR at all operating conditions. At Philips, MRI’s RF receiver is based on...
master thesis 2020
document
Gonen, B. (author), Karmakar, S. (author), van Veldhoven, Robert (author), Makinwa, K.A.A. (author)
This article presents a continuous-Time zoom analog to digital converter (ADC) for audio applications. It employs a high-speed asynchronous SAR ADC that dynamically updates the references of a continuous-Time delta-sigma modulator (CTDSM). Compared to previous switched-capacitor (SC) zoom ADCs, its input impedance is essentially resistive,...
journal article 2020
document
Peyghami, Saeed (author), Zarei, Seyed Fariborz (author), Ghasemi, Mohammad Amin (author), Palensky, P. (author), Blaabjerg, Frede (author)
Microgrids (MGs) are becoming active segments of future power systems. Frequency regulation inislanded MGs is of high importance to guarantee stable and reliable operation under different loading conditions. This paper proposes a decentralized frequency regulation of AC MGs, which relies on the local information. Comparing to the conventional...
conference paper 2020
document
Karmakar, S. (author), Gonen, B. (author), Sebastiano, F. (author), van Veldhoven, Robert (author), Makinwa, K.A.A. (author)
This paper presents a dynamic zoom analog-to-digital converter for use in low-bandwidth (<1 kHz) instrumentation applications. It employs a high-speed asynchronous successive approximation register (SAR) ADC that dynamically updates the references of a fully differential Δ Σ ADC. Compared to previous zoom ADCs,...
journal article 2018
document
D'Urbino, M. (author)
This work presents an architecture capable of digitizing every channel of an ultrasound transducer array independently and simultaneously. This feature is achieved by exploiting the frequency response of the piezoelectric transducer in order to save area and reduce to a minimum the required building blocks of the ADC. The transducer is used as...
master thesis 2017
document
Jiang, J. (author), Chang, Z.Y. (author), Pertijs, M.A.P. (author)
This paper presents an energy-efficient readout circuit for micro-machined resonant sensors. It operates by briefly exciting the sensor at a frequency close to its resonance frequency, after which resonance frequency and quality factor are determined from a single ring-down transient. The circuit employs an inverter-based trans-impedance...
journal article 2015
document
Rajendran, L. (author)
This thesis presents an incremental ?? capacitance-to-digital converter (CDC) that serves as an interface circuit for a MEMS-based pressure sensor. The thesis presents a systematic analysis of the CDC and compares different CDC architectures. A novel non-linear CDC is also proposed and analysed. Energy-efficiency of the CDC is improved by...
master thesis 2013
document
Chae, Y. (author), Souri, K. (author), Makinwa, K.A.A. (author)
A 20-bit incremental ADC for battery-powered sensor applications is presented. It is based on an energy-efficient zoom ADC architecture, which employs a coarse 6-bit SAR conversion followed by a fine 15-bit ΔΣ conversion. To further improve its energy efficiency, the ADC employs integrators based on cascoded dynamic inverters for extra gain and...
journal article 2013
Searched for: subject%3A%22inverter%255C-based%22
(1 - 17 of 17)