- document
-
Wansink, Nick (author)Micromechanical resonators, which have become feasible due to advanced manufacturing techniques, have shown several interesting phenomena including mode coupling in a range of applications that span metrology and sensing. Conventional fabrication methods of these resonators have been used throughout the field. However, fabrication of...master thesis 2024
- document
-
Mirkhalaf, Mohsen (author), Rocha, I.B.C.M. (author)During the last few decades, industries such as aerospace and wind energy (among others) have been remarkably influenced by the introduction of high-performance composites. One challenge, however, for modeling and designing composites is the lack of computational efficiency of accurate high-fidelity models. For design purposes, using...journal article 2024
- document
-
Morete Barbosa Bertolo, V. (author)The use of materials in increasingly severe service conditions raises concerns about structural safety with respect to cleavage fracture. There are three main material-related challenges that structures face under harsh environments: 1) the trade-off between strength and toughness; 2) the ductile-to-brittle transition behaviour of BCC high...doctoral thesis 2023
- document
-
Atreya, V. (author)Dual-phase (DP) steels are an important class of advanced high-strength steels (AHSS) and constitute a major share of steels for the automotive industry. A microstructure consisting of hard martensite embedded in a soft ferritic matrix gives them a good combination of strength and ductility. The martensite formation in the microstructure from...doctoral thesis 2023
- document
-
Pedrotti, Matteo (author), Dieudonné, A.A.M. (author), Dijkstra, J. (author), Musso, Guido (author), Hattab, Mahdia (author), Viggiani, Gioacchino (author)The importance of physico-chemical processes at the particle scale for the engineering scale behaviour of fine-grained geomaterials is undisputed. Yet, despite great advances in the discipline, experimental evidence that fully resolves the clay micromechanics i.e. linking the evolving microstructure and interparticle actions under loading, is...conference paper 2023
- document
-
Li, Zhen (author), Chen, Zhiyuan (author), Law, Man-Kay (author), Du, S. (author), Cheng, Xu (author), Zeng, Xiaoyang (author), Han, Jun (author)With the advent of the lnternet-of-Things (1oT) era, sensor nodes are required in almost all fields to achieve a better interaction between humans and the environment. Piezoelectric energy harvester (PEH), which exhibits an equivalent electrical model of an AC current source /P in parallel with the inherent capacitor CP, is a promising...conference paper 2023
- document
-
Zheng, T. (author), Guo, Licheng (author), Sun, Ruijian (author), Wang, Tongtong (author), Hong, Changqing (author), Benedictus, R. (author), Pascoe, J.A. (author)In this paper, the effect of interface properties on the compressive failure behavior of 3D woven composites (3DWC) is investigated by incorporating a micromechanics-based multiscale damage model (MMDM). The correlation between the mesoscopic stress of yarns and microscopic stress of constituents is established by defining a stress...journal article 2023
- document
-
Ji, X. (author), Du, L. (author), He, S. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author)Copper nanoparticles (CuNPs) sintering for flip-chip interconnects is a promising solution for 3D and heterogeneous integration to overcome the limitation of solder materials. To this end, we perform the photolithographic stencil printing method to pattern CuNPs, and the form of flip-chip interconnects is completed after CuNPs sintering...journal article 2023
- document
-
Zhang, Shizhe (author)Alkali-activated Materials (AAMs), including those classified as geopolymer, are obtained through the reaction between a solid precursor and an alkaline solution. Compared with ordinary Portland cement (OPC) binders, these materials maintain comparable mechanical properties but have the advantage of reducing greenhouse gas emissions and...doctoral thesis 2022
- document
-
Jol, Mark (author)Asphalt concrete is the most used material in road construction. Analysing the behaviour and properties of this material is vital for modern day society. Currently, this is mostly done in labs using actual asphalt mixtures. However, this is a very expensive and time consuming process. An upcoming alternative approach is the use of computational...master thesis 2022
- document
-
Bharath, Anirudh (author)This work develops a stand-alone Finite Element-based Unit Cell for the modelling of Fibre Reinforced Composites, capable of capturing 3D stress states and geometrical imperfections at the micro-scale. The project considers different beam and 3D elements for this purpose and draws comparisons between them based on computational efficiency,...master thesis 2022
- document
-
Zhang, H. (author)With the attempt to reduce traffic noise, porous asphalt (PA) mixture is widely used as a wearing course on the highways in the Netherlands. However, due to the open structure, PA mix pavement easily suffers from the loss of individual aggregates from its surface, which is named as ravelling. After the initial ravelling, the damage can rapidly...doctoral thesis 2022
- document
-
Wang, Xinyue (author), Dong, Sufen (author), Li, Z. (author), Han, Baoguo (author), Ou, Jinping (author)This study investigates the effects of nanofillers on the interfacial transition zone (ITZ) between aggregate and cement paste by using nanoindentation and statistical nanoindentation techniques. Moreover, the underlying mechanisms are revealed through micromechanical modeling. The nanoindentation results indicate that incorporating...journal article 2022
- document
-
Baar, Simon (author), Pavlov, Leonid (author), Kassapoglou, C. (author)Onset Theory (previously known as Strain Invariant Failure Theory) is a physics-based composite failure criterion attempting to predict failure at the level of constituents rather than for a homogenized ply. Applying Onset Theory correctly requires a number of steps. As a starting point for other researchers, a consistent approach is...journal article 2022
- document
-
Atreya, V. (author), van Dokkum, J.S. (author), Bos, C. (author), Santofimia, Maria Jesus (author)The volume increase and shape change during austenite to martensite transformation in dual-phase (DP) steels are largely accommodated in the microstructure by the deformation of the surrounding ferrite matrix. Accurate estimation of transformation-induced deformation of ferrite via experiments and modeling is essential for predicting the...journal article 2022
- document
-
Zhou, Y. (author), Sluys, Lambertus J. (author), Esposito, R. (author)Accurate assessment of the overall mechanical behavior of masonry, composed of bricks and mortar joints, remains challenging due to its inhomogeneous and orthotropic nature. In this study, the feasibility of various mean-field homogenization schemes for the three-dimensional orthotropic elastic properties of masonry is comprehensively...journal article 2022
- document
-
Celada-Casero, Carola (author), Vercruysse, Florian (author), Linke, Bernd (author), Smith, Ali (author), Kok, Piet (author), Sietsma, J. (author), Santofimia, Maria Jesus (author)Quenching & Partitioning (Q&P) steels owe their good strength-ductility combinations to the martensite/austenite (α’/γ) mechanical interactions and to the formation of mechanically-induced martensite (α′<sub>mech</sub>) through the transformation-induced plasticity (TRIP) effect. An essential role is played by carbon, whose...journal article 2022
- document
-
Wang, H. (author), Zhang, H. (author), Liu, X. (author), Scarpas, Athanasios (author), Leng, Zhen (author)Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. The current study aims to further improve the prediction accuracy of micromechanical models for CRMB by considering the interparticle interactions. To accomplish this goal, two different...journal article 2021
- document
-
Wang, M. (author), Ge, Daohan (author), Zhang, Liqiang (author), Herder, J.L. (author)Compliant micromechanisms (CMMs) acquire mobility from the deflection of elastic members and have been proven to be robust by millions of silicon MEMS devices. However, the limited deflection of silicon impedes the realization of more sophisticated CMMs, which often require larger deflections. Recently, some novel manufacturing processes have...review 2021
- document
-
Al Khateeb, Loay (author), Anupam, K. (author), Erkens, S. (author), Scarpas, Athanasios (author)The paper aims to simulate the micromechanical behavior of asphalt mixtures during the compaction process using the Discrete Element Method (DEM). The interactions between the components of a Porous Asphalt (PA) mixture were represented using an Elastic Viscoelastic Contact Model (EVCM), which is a user-defined model implemented in EDEM...journal article 2021