Improved corrosion resistance of aluminum brazing sheet by a post-brazing heat treatment

This work studies the influence of the microstructure on the corrosion mechanism and susceptibility of as-brazed aluminum sheet. Various microstructures are obtained using postbrazing heat treatments developed to enhance the corrosion resistance of an AA4xxx/AA3xxx brazing sheet. The heat treatment results in a decrease of the matrix Si...

Atomic Resolution Monitoring of Cation Exchange in CdSe-PbSe Heteronanocrystals during Epitaxial Solid?Solid?Vapor Growth

Here, we show a novel solid?solid?vapor (SSV) growth mechanism whereby epitaxial growth of heterogeneous semiconductor nanowires takes place by evaporation-induced cation exchange. During heating of PbSe-CdSe nanodumbbells inside a transmission electron microscope (TEM), we observed that PbSe nanocrystals grew epitaxially at the expense of CdSe...

Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels

Multiphase steels utilising composite strengthening may be further strengthened via grain refinement or precipitation by the addition of microalloying elements. In this study a Nb microalloyed steel comprising martensite, bainite and retained austenite has been studied. By means of transmission electron microscopy (TEM), we have investigated the...

Epitaxial aluminum nitride tunnel barriers grown by nitridation with a plasma source

High critical current-density (10?to?420?kA/cm2) superconductor-insulator-superconductor tunnel junctions with aluminum nitride barriers have been realized using a remote nitrogen plasma from an inductively coupled plasma source operated in a pressure range of 10?3–10?1?mbar. We find a much better reproducibility and control compared to previous...

Monocrystalline NbN nanofilms on a 3C-SiC/Si substrate

The authors have realized NbN (100) nanofilms on a 3C-SiC (100)/Si(100) substrate by dc reactive magnetron sputtering at 800?°C. High-resolution transmission electron microscopy (HRTEM) is used to characterize the films, showing a monocrystalline structure and confirming epitaxial growth on the 3C-SiC layer. A film ranging in thickness from 3.4...

Crystal structure and band gap determination of HfO2 thin films

Valence electron energy loss spectroscopy (VEELS) and high resolution transmission electron microscopy (HRTEM) are performed on three different HfO2 thin films grown on Si (001) by chemical vapor deposition (CVD) or atomic layer deposition (ALD). For each sample the band gap (Eg) is determined by low-loss EELS analysis. The Eg values are then...

Stress in tungsten carbide-diamond like carbon multilayer coatings

Tungsten carbide-diamond like carbon (WC-DLC) multilayer coatings have been prepared by sputter deposition from a tungsten-carbide target and periodic switching on and off of the reactive acetylene gas flow. The stress in the resulting WC-DLC multilayers has been studied by substrate curvature. Periodicity and microstructure have been studied by...

Determination of in-depth density profiles of multilayer structures

We developed and demonstrate an analysis method in which we calibrate the intensity scale of cross-sectional transmission electron microscopy (TEM) using Cu K? reflectometry. This results in quantitative in-depth density profiles of multilayer structures. Only three free parameters are needed to obtain the calibrated profiles, corresponding to...

Stress in sputter-deposited Cr films: Influence of Ar pressure

We studied the tensile stress and grain-width evolution in sputter-deposited Cr films with thickness from 20?nm to 2.7??m. Films were deposited in an industrial Hauzer 750 physical vapor deposition machine at 50–80?°C. The films exhibited a columnar microstructure. A power law behavior of the tensile stress as well as of the average grain width...

An in situ hot stage transmission electron microscopy study of the decomposition of Fe-C austenites