Searched for: subject%3A%22microscopy%22
(1 - 20 of 22)

Pages

document
Lane, R. (author), Wolters, Anouk H.G. (author), Giepmans, Ben N.G. (author), Hoogenboom, J.P. (author)
Volume electron microscopy (EM) of biological systems has grown exponentially in recent years due to innovative large-scale imaging approaches. As a standalone imaging method, however, large-scale EM typically has two major limitations: slow rates of acquisition and the difficulty to provide targeted biological information. We developed a 3D...
journal article 2022
document
van Kessel, L.C.P.M. (author), Huisman, T.A. (author), Hagen, Cornelis W. (author)
Background: Line-edge roughness (LER) is often measured from top-down critical dimension scanning electron microscope (CD-SEM) images. The true three-dimensional roughness profile of the sidewall is typically ignored in such analyses. Aim: We study the response of a CD-SEM to sidewall roughness (SWR) by simulation. Approach: We generate...
journal article 2020
document
van Kessel, L.C.P.M. (author), Hagen, C.W. (author), Kruit, P. (author)
Background: Monte Carlo simulations of scanning electron microscopy (SEM) images ignore most surface effects, such as surface plasmons. Previous experiments have shown that surface plasmons play an important role in the emission of secondary electrons (SEs).Aim: We investigate the influence of incorporating surface plasmons into simulations...
journal article 2019
document
Narváez, A.C. (author)
Cathodoluminescence (CL), the excitation of light by an electron beam, has gained attention as an analysis tool for investigating the optical response of a structure, at a resolution that approaches that in electron microscopy, in the nanometer range. However, the application possibilities are limited because the use of transparent substrates,...
doctoral thesis 2014
document
Seshan, V. (author), Arroyo, C.R. (author), Castellanos-Gomez, A. (author), Prins, F. (author), Perrin, M.L. (author), Janssens, S.D. (author), Haenen, K. (author), Nesládek, M. (author), Sudhölter, E.J.R. (author), De Smet, L.C.P.M. (author), Van der Zant, H.S.J. (author), Dulic, D. (author)
A high-current annealing technique is used to fabricate nanogaps and hybrid diamond/graphite structures in boron-doped nanocrystalline diamond films. Nanometer-sized gaps down to ?1?nm are produced using a feedback-controlled current annealing procedure. The nanogaps are characterized using scanning electron microscopy and electronic transport...
journal article 2012
document
Wang, J. (author), Plissard, S. (author), Hocevar, M. (author), Vu, T.T.T. (author), Zehender, T. (author), Immink, G.G.W. (author), Verheijen, M.A. (author), Haverkort, J. (author), Bakkers, E.P.A.M. (author)
We investigate the growth of vertically standing [100] zincblende InP nanowire (NW) arrays on InP (100) substrates in the vapor-liquid-solid growth mode using low-pressure metal-organic vapor-phase epitaxy. Precise positioning of these NWs is demonstrated by electron beam lithography. The vertical NW yield can be controlled by different...
journal article 2012
document
Jun, D.S. (author), Kutchoukov, V.G. (author), Kruit, P. (author)
A next generation ion source suitable for both high resolution focused ion beam milling and imaging applications is currently being developed. The new ion source relies on a method of which positively charged ions are extracted from a miniaturized gas chamber where neutral gas atoms become ionized by direct electron impact. The use of a very...
journal article 2011
document
Post, P.C. (author), Mohammadi-Gheidari, A. (author), Hagen, C.W. (author), Kruit, P. (author)
Lithography techniques based on electron-beam-induced processes are inherently slow compared to light lithography techniques. The authors demonstrate here that the throughput can be enhanced by a factor of 196 by using a scanning electron microscope equipped with a multibeam electron source. Using electron-beam induced deposition with MeCpPtMe3...
journal article 2011
document
Hu, J. (author), Koleva, D.A. (author), De Wit, J.H.W. (author), Kolev, H. (author), Van Breugel, K. (author)
This study presents the results on the investigation of the corrosion behavior of carbon steel in model alkaline medium in the presence of very low concentration of polymeric nanoaggregates [0.0024 wt % polyethylene oxide (PEO)113-b-PS70 micelles]. The steel electrodes were investigated in chloride free and chloride-containing cement extracts....
journal article 2011
document
Rosticher, M. (author), Ladan, F.R. (author), Maneval, J.P. (author), Dorenbos, S.N. (author), Zijlstra, T. (author), Klapwijk, T.M. (author), Zwiller, V. (author), Lupa?cu, A. (author), Nogues, G. (author)
We report the detection of single electrons using a Nb0.7Ti0.3N superconducting wire deposited on an oxidized silicon substrate. While it is known that this device is sensitive to single photons, we show that it also detects single electrons with kilo-electron-volt energy emitted from the cathode of a scanning electron microscope with an...
journal article 2010
document
Zonnevylle, A.C. (author), Hagen, C.W. (author), Kruit, P. (author), Valenti, M. (author), Schmidt-Ott, A. (author)
Positioning of charged nanoparticles with the help of charge patterns in an insulator substrate is a known method. However, the creation of charge patterns with a scanning electron microscope for this is relatively new. Here a scanning electron microscope is used for the creation of localized charge patterns in an insulator, while a glowing wire...
journal article 2009
document
Botman, A. (author), Hagen, C.W. (author), Li, J. (author), Thiel, B.L. (author), Dunn, K.A. (author), Mulders, J.J.L. (author), Randolph, S. (author), Toth, M. (author)
The material grown in a scanning electron microscope by electron beam-induced deposition (EBID) using Pt(PF3)4 precursor is shown to be electron beam sensitive. The effects of deposition time and postgrowth electron irradiation on the microstructure and resistivity of the deposits were assessed by transmission electron microscopy, selected area...
journal article 2009
document
Zwanenburg, F.A. (author), Van Loon, A.A. (author), Steele, G.A. (author), Rijmenam, C.E.W.M. (author), Balder, T. (author), Fang, Y. (author), Lieber, C.M. (author), Kouwenhoven, L.P. (author)
We report the realization of extremely small single quantum dots in p-type silicon nanowires, defined by Schottky tunnel barriers with Ni and NiSi contacts. Despite their ultrasmall size the NiSi–Si–NiSi nanowire quantum dots readily allow spectroscopy of at least ten consecutive holes, and additionally they display a pronounced excited-state...
journal article 2009
document
Faradzhev, N. (author), Sidorkin, V. (author)
The authors report on the interaction of atomic hydrogen with Sn and thin Ru film at room temperature. The study is done using a combination of photoelectron and low energy ion scattering spectroscopies as well as scanning electron microscopy. The adsorption of hydrogen on a Sn surface leads to the formation of stannane (SnH4), which...
journal article 2009
document
Sidorkin, V. (author), Van der Drift, E.W.J.M. (author), Salemink, H. (author)
Performance of hydrogen silsesquioxane (HSQ) resist material with respect to the temperature during electron beam exposure was investigated. Electron beam exposure at elevated temperatures up to 90?°C shows sensitivity rise and slight contrast (?) degradation compared to lower temperature cases. Ultrahigh resolution structures formed at elevated...
journal article 2008
document
Khalili Amiri, P. (author), Zhuang, Y. (author), Schellevis, H. (author), Rejaei, B. (author), Vroubel, M. (author), Ma, Y. (author), Burghartz, J.N. (author)
This work presents a series of high-resistivity nanogranular Co–Al–O films with maximum resistivity of ? 110?m??cm. The films were deposited using pulsed dc reactive sputtering of a Co72Al28 target in an oxygen/argon ambient. The samples were characterized by scanning electron microscopy (SEM), M-H loop measurements, and s-parameter measurements...
journal article 2007
document
Koleva, D.A. (author), De Wit, J.H.W. (author), Van Breugel, K. (author), Lodhi, Z.F. (author), Ye, G. (author)
The present study explores the formation of corrosion products on the steel surface (using as-received low carbon construction steel) in reinforced concrete in conditions of corrosion and subsequent transformation of these layers in conditions of cathodic protection (CP).
journal article 2007
document
Koleva, D.A. (author), De Wit, J.H.W. (author), Van Breugel, K. (author), Lodhi, Z.F. (author), Van Westing, E. (author)
The electrochemical behavior of steel reinforcement in conditions of corrosion and cathodic protection was studied, using electrochemical impedance spectroscopy (EIS) and compared to reference (noncorroding) conditions. Polarization resistance (PR) method and potentiodynamic polarization (PDP) were employed as well, in addition to ac 2 pin...
journal article 2007
document
Van der Heijden, R. (author), Carlström, C.F. (author), Snijders, J.A.P. (author), Van der Heijden, R.W. (author), Karouta, F. (author), Nötzel, R. (author), Salemink, H.W.M. (author), Kjellander, B.K.C. (author), Bastiaansen, C.W.M. (author), Broer, D.J. (author), Van der Drift, E. (author)
Polymer filling of the air holes of indium-phosphide-based two-dimensional photonic crystals is reported. After infiltration of the holes with a liquid monomer and solidification of the infill in situ by thermal polymerization, complete filling is proven using scanning electron microscopy. Optical transmission measurements of a filled photonic...
journal article 2006
document
Escobar Galindo, R. (author)
The study of thin protective coatings is one of the major research topics in the industry. Among the many questions in this wide topic, the aim of this thesis has been to contribute to the understanding of two of them: the problem of the adhesion and the role of porosity in thin films. The thin films studied in this work were mainly...
doctoral thesis 2003
Searched for: subject%3A%22microscopy%22
(1 - 20 of 22)

Pages