- document
-
Vonk, Martijn (author)Autonomous vehicles (AVs) can solve a lot of problems related to traffic safety, comfort and congestion. While the sensors used by these vehicles are getting cheaper, more accurate, and software is improving, the first completely automated vehicle does not exist yet. When AVs start gradually driving on the roads, there will be a mixed traffic...master thesis 2023
- document
-
Wan, Z. (author), Chang, Z. (author), Xu, Y. (author), Šavija, B. (author)In this paper, optimization of vascular structure of self-healing concrete is performed with deep neural network (DNN). An input representation method is proposed to effectively represent the concrete beams with 6 round pores in the middle span as well as benefit the optimization process. To investigate the feasibility of using DNN for...journal article 2023
- document
-
Yang, Yueming (author), Wang, Xurong (author), Hooman, K. (author), Han, Kuihua (author), Xu, Jinliang (author), He, Suoying (author), Qi, Jianhui (author)Recently, the supercritical carbon dioxide (SCO<sub>2</sub>) power cycle has become a hotspot in the field of energy-efficient utilization. The utilization of additives in the power cycle has been proven to be an effective way to improve the SCO<sub>2</sub> power cycle efficiency. As one of the core components of the system, the influence of...journal article 2023
- document
-
Xiao, Tian (author), Zhang, Qiaoling (author), Yang, Xiaohu (author), Hooman, K. (author), Li, Guodong (author)It is indicated that the solder joint of the metal fibrous materials is a critical factor impacting the heat conduction. To reveal the mechanism by which solder joint sizes, solder joint skips, solder flux materials, and filling media affect the thermal conductivity of fibres, pore-scale numerical simulation is employed to study the thermal...journal article 2023
- document
-
Hunziker, J. (author), Slob, E.C. (author), Irving, J. (author)Modeling ground penetrating radar (GPR) reflection data on glaciers with methods that require the discretization of the full subsurface domain is extremely computationally expensive because of the combination of a large domain size and the comparatively short wavelength of the signal. To address this issue, we build on and extend a previously...journal article 2023
- document
-
Molahalli, Pranav (author)Due to the global energy crisis, there is a growing need to make industrial processes more efficient and clean. One such method is to use effective and renewable working fluids in power and refrigeration cycles. Research in this field during the past decade has placed supercritical CO2 (SCO2) in the forefront due to its non-ideal properties and...master thesis 2022
- document
-
van Gameren, Mels (author)To mitigate the effects of climate change, CO2-emmissions will have to be reduced. This can be done by substituting the use of fossil, CO2-heavy by the use of renewable, CO2-neutral energy carriers. Hydrogen is such a renewable energy carrier that can be produced in a CO2-neutral way. The potential of hydrogen is recognized by the European...master thesis 2022
- document
-
Franx, Marius (author)The ramifications of plastic pollution on the environment are becoming increasingly serious in various forms throughout the world. In this context, rivers are the most important suppliers of plastics entering the marine environment. However, rivers that contain high loads of plastic waste also directly harm the livelihoods of people living near...master thesis 2022
- document
-
Gaffarel, Jérémie (author)The Mars Ascent Vehicle will bring samples back from the surface of Mars to its low orbit in 2031. Its preliminary design has been performed by NASA, defining it as a two-stage solid propellant rocket. However, a research gap exists in finding what the optimum solid rocket motors geometries are to bring the Martian samples to a target orbit...master thesis 2022
- document
-
VOULTSOS, IOANNIS (author)The energy transition towards carbon neutrality requires a rapid electrification of all energy sectors by 2050. In the EU-27, the REPowerEU strategy, initiated in March 2022, is pursuing this target even more ambitiously. However, in order to achieve the aforementioned goals, the increasing demand for green hydrogen will...master thesis 2022
- document
-
Peng, Shaoyuan (author), Liu, Y. (author), Li, Renge (author), Wei, Ying (author), Chan, Pak Wai (author), Li, Sunwei (author)Simulating a typhoon’s wind field via mesoscale models is important in terms of providing not only the guidelines for urban planning and onshore/offshore constructions, but also the provision of insight into the dynamics and thermodynamics of tropical cyclone systems. Therefore, the errors that are contained in simulation results were...journal article 2022
- document
-
Ebrahimi, Amin (author), Sattari, Mohammad (author), Bremer, Scholte J.L. (author), Luckabauer, Martin (author), Römer, Gert-willem R.B.E. (author), Richardson, I.M. (author), Kleijn, C.R. (author), Hermans, M.J.M. (author)The absorptivity of a material is a major uncertainty in numerical simulations of laser welding and additive manufacturing, and its value is often calibrated through trial-and-error exercises. This adversely affects the capability of numerical simulations when predicting the process behaviour and can eventually hinder the exploitation of fully...journal article 2022
- document
-
Jolly, Mark (author), Katgerman, L. (author)Over the last 4 decades, remarkable progress has been made in the modelling of casting processes. The development of casting models is well reflected in the proceedings of the 15 Modelling of Casting, Welding and Advanced Solidification Processes (MCWASP) conferences that have been held since 1980. Computer simulations have enabled a better...journal article 2022
- document
-
Wang, Y. (author), Voskov, D.V. (author)Simulation of heat production in high-enthalpy geothermal systems is associated with a complex physical process in which cold water invades steam-saturated control volumes. The fully implicit, fully coupled numerical strategy is commonly adopted to solve the governing system composed of mass and energy conservation equations. A conventional...journal article 2022
- document
-
van As, K. (author), Simons, Bram A. (author), Kleijn, C.R. (author), Kenjeres, S. (author), Bhattacharya, N. (author)We study how the speckle contrast depends on scatterer velocity, with the goal of further developing laser speckle imaging as a quantitative measurement technique. To that end, we perform interferometric computer simulations on a dilute plug flow. The results of our numerical experiment, that we compare with known analytical expressions to...journal article 2022
- document
-
Doan, Nguyen Anh Khoa (author)In this chapter, the research dedicated to moderate or intense low-oxygen dilution (MILD) combustion (also called flameless combustion) that relied on direct numerical simulations (DNS) is summarized. In particular, the various DNS carried out are detailed and three different configurations are considered: the autoigniting mixing layer...book chapter 2022
- document
-
Wan, Z. (author), Xu, Y. (author), Zhang, Y. (author), He, S. (author), Šavija, B. (author)Cracking is one of the main causes for deterioration of concrete structures. Self-healing concrete with 3D-printed vascular networks has excellent potential for autonomous self-healing. This approach is scarcely investigated: no studies have been devoted to the influence of printing parameters on the properties of vascular based self-healing...journal article 2022
- document
-
Liu, S. (author), Sinke, J. (author), Dransfeld, C.A. (author)Hot-pressing can be an attractive fabrication method that enables the forming of hybrid materials like thermoset based fibre metal laminates. However, the process simulation on press forming requires accurate material characterization and boundary conditions to facilitate part design for a defect-free component. In order to improve the overall...conference paper 2022
- document
-
Karamitopoulos, P. (author), Donselaar, Rick (author), Weltje, G. J. (author), van Toorenenburg, K. A. (author)An advection–diffusion model of fluvial processes was used to analyze the stratigraphic expression of avulsions in terminal river systems and understand their control on basin-fill architecture. The initial and boundary conditions of the model runs (i.e., catchment area, smoothed initial topographic surface, grain-size distribution and...journal article 2022
- document
-
Zhang, Qiang (author), Zhang, X. (author), Xu, Lei (author)Modelling slab track-bridge interaction subject to a moving train usually involves solving complex high-dimensional matrix equations which is time-consuming. This research works to optimize the auto-assembling process in the slab track-bridge coupling matrices formulation and improve the computational efficiency by truncating the dynamic...journal article 2022