Searched for: subject%3A%22physical%255C+modeling%22
(1 - 20 of 50)

Pages

document
Ławniczak, Aron (author)
Coastal areas face increasing threat from erosion. The use of coastal protection structures is imperative to counter this. Concrete “armouring” is widely used due to durability and cost-effectiveness. Conventional methods of “armouring” result in habitat degradation and loss of biodiversity. ECOncrete developed Coastalock, an armour unit...
master thesis 2024
document
van Marrewijk, Jaap (author)
The objective of this research is to gather more information about a possible relation between the slope angle of a rubble mound breakwater and the wave overtopping at this breakwater. The following research question is covered in this thesis: What is the influence of the slope angle of rubble mound breakwaters on wave overtopping? To answer...
master thesis 2024
document
van Vliet, Lars (author)
The impact of climate change, particularly the rise in sea levels, obstructs the effectiveness of existing coastal structures. Additionally, climate change can also have an amplifying effect on wind speeds (Takagi & Esteban, 2013). Without proper control, the accumulation of changing environmental boundary conditions could lead to disastrous...
master thesis 2023
document
van Balen, Ivo (author)
Following significant physical and economic damage associated with large tsunami disasters, this research assessed the efficacy of both nature-based and man-made tsunami mitigation measures. With an expected increase of the population living in tsunami-prone areas, it is critical to develop a better understanding of tsunami engineering. <br/><br...
master thesis 2023
document
Speth, Florine (author)
Coral reefs are considered to be a crucial ecosystem and form of natural coastal protection. They owe their effectiveness to their high structural complexity. This complexity, which positively influences aspects like species richness, coral recovery, live coral cover, and coastal protection, is often quantified using parameters such as porosity...
master thesis 2023
document
Kapnisis, Theodoulos (author)
Hydrofoil crafts with fully submerged foils can provide fast and economical waterway transport. However, their operation requires reliable onboard control systems to ensure the safety and comfort of their passengers, especially in rough sea conditions. This thesis project is focused on the dynamical modelling and the design...
master thesis 2022
document
van der Bijl, Ruben (author)
Climate change affects sea level rise and the safety of the people living behind seadikes. In order to prepare for this, several adaptation measures are available to reduce the overtopping discharge. Wave overtopping can be reduced by including roughness elements or adding a berm. Another possibility is to employ crest elements such as a...
master thesis 2022
document
Michels, Dirk-Jan (author)
On the east coast of Romania, at Eforie, coastal erosion manifests. To strengthen the coastal area a large coastal protection project was setup involving beach nourishment combined with the construction of breakwaters. The breakwaters are designed with the well-known modified Van der Meer formulas. To ensure confidence in the breakwaters...
master thesis 2022
document
Diederen, Carolien (author)
The objective of this master thesis is to investigate experimentally how non-breaking wave loading affects the stability of the MOSES artificial reefs, an artificial reef by the company ReefSystems. Small scale wave flume tests with a length scale factor of 20 were conducted in the Scheldt flume at Deltares in Delft to determine the stability of...
master thesis 2022
document
Molenkamp, Auke (author)
With the advance of urbanisation in coastal regions comes an increase in armoured shorelines and the destruction of coastal marine habitats. To combat this, ECOncrete Tech Ltd has developed a new eco-friendly armour unit, the CoastaLock. With its ecological advantages proven, its hydraulic performance is still largely unknown. This thesis aims...
master thesis 2022
document
van Leeuwen, Isabel (author)
A research on the atmosphere of Maastricht, applied to the design of Art Institute Frans
master thesis 2022
document
Lengkeek, Robert (author)
This study investigates the use of an open filter in a land reclamation structure. The possibility of replacing the geotextile that secures the core-backfill interface with a granular filter has been investigated. This is easier to install and therefore a potential cost-saving. Experiments have been done to determine the influence of various...
master thesis 2022
document
Harms, Johan (author)
Currently multiple projects investigate the effect of lowering the crest of groynes in the Dutch rivers with the aim to lower the backwater effect of groynes under high water levels. There is a major uncertainty however in the modelling of groynes, and therefore in the prediction of the effect of groyne lowering. Currently submerged groynes are...
master thesis 2021
document
Reuben Joseph, Reuben (author)
A study carried out to understand the effects on including vegetation as an additional reinforcement to improve streambank stability.
master thesis 2021
document
Wittekoek, Britt (author)
Geogrids are commonly used for reinforcement of soils in construction of railway and road embankments and bridge abutments. A relatively new application of geogrids is the anchorage of sheet pile walls, in which one or more layers of geogrid are attached to the sheet pile wall. This type of anchorage is particularly suitable for projects with...
master thesis 2020
document
Boersma, Floris (author)
This thesis is the third study of a research line that focuses on the interface stability of a rubble mound sand retaining structure. The type of interface considered is a geometrically open granular filter because of its economical and constructional benefits. The stability of an open filter structure in which the base layer is located on top...
master thesis 2020
document
Hol, Tijs (author)
Resistive RAM, or RRAM, is one of the emerging non-volatile memory (NVM) technologies, which could be used in the near future to fill the gap in the memory hierarchy between dynamic RAM (DRAM) and Flash, or even completely replace Flash. RRAM operates faster than Flash, but is still non-volatile, which enables it to be used in a dense 3D NVM...
master thesis 2020
document
Houtzager, Daan (author)
The purpose of this MSc thesis is to do an experimental study into the spatial and temporal variation of rocking armour units. Armour units on a breakwater slope under wave loading can sometimes start to move back and forth, this phenomenon is known as rocking. Rocking can lead to significant impacts between armour units, which can result in...
master thesis 2020
document
Ruwiel, Tim (author)
XblocPlus is a single layer armour unit that is recently developed by BAM Infraconsult. It is the successor of the Xbloc. An important advantage of the XblocPlus is the relatively high construction speed compared to the Xbloc. The increased construction speed is caused by the possibility to place XblocPlus in a uniform pattern and the relatively...
master thesis 2020
document
Broos, Jan-Willem (author)
XblocPlus is a new uniformly placed single layer armour unit, developed by Delta Marine Consultants (BAM Infraconsult). This report focuses on the stability of the first row of armour units, as this row is interlocked less than other rows. When the first row starts to slide, this is a big threat to the stability of the entire armour layer....
master thesis 2019
Searched for: subject%3A%22physical%255C+modeling%22
(1 - 20 of 50)

Pages