- document
-
Bhagali Nataraja Anup, Anup (author)Frontal polymerization (FP) has emerged as a promising alternative to traditional bulk curing methods in recent years for manufacturing high-performance fibre-reinforced polymer (FRP) composites. The energy utilized in this self-propagating curing strategy is solely derived from the exothermic enthalpy of polymerization, making it potentially...master thesis 2023
- document
-
Jaarsma, Victor (author)This research investigates the implementation of electroactive polymer (EAP) actuators for the propulsion of a robotic fish. An efficient manufacturing procedure is developed which uses a combination of stencil printing and inkjet printing to manufacture P(VDF-TrFE-CTFE) actuators. The influence of layer thicknesses is studied theoretically and...master thesis 2023
- document
-
Venugopal, A. (author)Climate change, due to the continued emissions of carbon dioxide into our atmosphere and subsequent warming of the planet, is an existential crisis facing humanity. The rising temperature is are resulting in the melting of our ice caps and glaciers, influencing the weather patterns, are making many parts of the world unliveable and are driving...doctoral thesis 2023
- document
-
Wu, Haoming (author)Alkali-activated material (AAM) is one of the most attractive alternatives to ordinary Portland cement (OPC). Recently, more and more research interests are devoted to durability performance. In cold areas, freeze-thaw resistance is a crucial durability factor for concrete. However, the understanding of the freeze-thaw resistance of AAMs is...master thesis 2023
- document
-
Bussemakers, Raúl (author)The production of plastic materials has experienced incredible growth over the past decades. Polyethylene constitutes the largest part (25%) of plastic production, finding its application mostly as film in industrial and food packaging and agricultural use. However, since packaging materials are getting increasingly complex, polyethylene waste...master thesis 2023
- document
-
Yao, Liaojun (author), Liu, J. (author), Lyu, Zhangming (author), Alderliesten, R.C. (author), Hao, Cui (author), Ren, Chuanxi (author), Guo, Licheng (author)Carbon-fibre reinforced composites are susceptible to delamination. Fibre bridging is an important shielding mechanism frequently observed in delamination. The presence of these bridging fibres can significantly increase interlaminar resistance, making it critical to represent this phenomenon for delamination characterization in composite...journal article 2023
- document
-
Brunner, A.E. (author), Alderliesten, R.C. (author), Pascoe, J.A. (author)Quasi-static or cyclic loading of an artificial starter crack in unidirectionally fibre-reinforced composite test coupons yields fracture mechanics data—the toughness or strain-energy release rate (labelled G)—for characterising delamination initiation and propagation. Thus far, the reproducibility of these tests is typically between 10 and...journal article 2023
- document
-
Motreuil-Ragot, P.A. (author), Hunt, A. (author), Sacco, L.N. (author), Sarro, Pasqualina M (author), Mastrangeli, Massimo (author)Ionic polymer metal composites (IPMCs) are a class of materials with a rising appeal in biological micro-electromechanical systems (bio-MEMS) due to their unique properties (low voltage output, bio-compatibility, affinity with ionic medium). While tailoring and improving actuation capabilities of IPMCs is a key motivator in almost all IPMC...journal article 2023
- document
-
Huo, L. (author), Kassapoglou, C. (author), Alderliesten, R.C. (author)To improve current design approaches for composite structures, it is required to further investigate the damage interaction effects of composite materials under multiple out-of-plane concentrated loads. It is first necessary to comprehend the dependence of the effective delamination threshold, which describes whether a delamination grows on pre...journal article 2023
- document
-
Chen, Y. (author), Liang, M. (author), Zhang, Y. (author), Li, Z. (author), Šavija, B. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)Autogenous shrinkage may be a critical issue concerning the use of limestone-calcined clay-cement (LC3) in high-performance concrete and 3D printable cementitious materials, which have relatively low water to binder (W/B) ratio. Adding an internal curing agent, i.e., superabsorbent polymer (SAP), could be a viable solution in this context....journal article 2023
- document
-
Pei, R. (author), Tarek-Bahgat, N. (author), van Loosdrecht, Mark C.M. (author), Kleerebezem, R. (author), Werker, A. (author)Poly(3-hydroxybutyrate) (PHB) was accumulated in full-scale municipal waste activated sludge at pilot scale. After accumulation, the fate of the PHB-rich biomass was evaluated over two weeks as a function of initial pH (5.5, 7.0 and 10), and incubation temperature (25, 37 and 55 °C), with or without aeration. PHB became consumed under aerobic...journal article 2023
- document
-
Falcetelli, F. (author), Cristiani, D.L.M. (author), Yue, N. (author), Sbarufatti, Claudio (author), Sante, Raffaella Di (author), Zarouchas, D. (author)Distributed Optical Fiber Sensors (DOFS) show several inherent benefits with respect to conventional strain-sensing technologies and represent a key technology for Structural Health Monitoring (SHM). Despite the solid motivation behind DOFS-based SHM systems, their implementation for real-time structural assessment is still unsatisfactory...conference paper 2023
- document
-
Staal, Jeroen (author), Smit, Edgar (author), Caglar, Baris (author), Michaud, Véronique (author)Radical induced cationic frontal polymerisation (RICFP) is considered a promising low energy method for processing of fibre reinforced polymers (FRPs). Optimisation of the local heat balance between reinforcement, epoxy resin and the surrounding mould is required to pave the way for its adaptation to an industrial processing method for high...journal article 2023
- document
-
Quan, D. (author), Liu, Jiaming (author), Yao, L. (author), Dransfeld, C.A. (author), Alderliesten, R.C. (author), Zhao, Guoqun (author)The production of advanced composites from recycled carbon fibres (rCFs) is critical for the sustainable development of carbon fibre industry. Herein, non-woven mats consisting of commingled rCFs and Polyphenylene-sulfide (PPS) fibres were compression moulded to manufacture rCF/PPS composites, with the fibre/matrix adhesion being tailored by...journal article 2023
- document
-
Sattari, R. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author)This study presents the design and fabrication of an in-package relative humidity sensor for epoxy molding compound (EMC) packages. The sensor comprises shielded interdigital electrodes (SIDE) for in-situ monitoring of humidity absorption/desorption in the package encapsulation layer. A novel approach is employed in the device fabrication to...conference paper 2023
- document
-
Liao, Z. (author), Zoumhani, O. (author), Boutry, C.M. (author)The objective of this review is to investigate the potential of functionalized magnetic polymer composites for use in electromagnetic micro-electro-mechanical systems (MEMS) for biomedical applications. The properties that make magnetic polymer composites particularly interesting for application in the biomedical field are their biocompatibility...journal article 2023
- document
-
Slegers, Ron (author)An experimental research into the use of basalt as reinforcement in concrete to reduce the ECI value of a concrete quay wall apron. In this research experiments with basalt minibars and basalt reinforced polymer rebars are performed to compare directly to steel fibres and steel rebars. With the test results 4 designs are produced resulting in...master thesis 2022
- document
-
van der Voort, Silvana (author)Biomedical micro-electromechanical systems or BioMEMS are microdevices with actuation or sensory function in biomedical applications. In this process, polymers are widely used as material layers. Polymers have significant advantages for applications in BioMEMS, such as low cost and ease of fabrication.<br/>The problem at the moment is the lack...master thesis 2022
- document
-
de Winter, Jikke (author)Biosensing properties like mass, density and stiffness on a single cell level can help diagnose diseases. Mass sensing of cells and subcellular components is typically performed with resonant microstructures. Recently such microstructures were fabricated using an emerging 3D printing technique called two-photon polymerization (2PP) contrary to...master thesis 2022
- document
-
Bos, Joris (author)Electroactive polymers (EAPs) are smart materials that have electromechanical and mechanoelectrical transduction properties. They are flexible, lightweight, easy to shape and cheap to produce. These properties allow EAPs to be used as actuators or sensors in applications such as soft robotics, metamaterial structures, or other future...master thesis 2022