A Resilience Enhanced Secondary Control for AC Micro-grids

Communication-based distributed secondary control is deemed necessary to restore the state of islanding AC microgrids to set points. As its limited global information, the microgrids become vulnerable to cyber-attacks, which by falsifying the communicating singles, like the angular frequency, can disturb the power dispatch in the microgrids...

A Control Method for Converter-interfaced Sources to Improve Operation of Directional Protection Elements

The traditional fault control strategy of converter-interfaced renewable energy sources (CIRESs) may bring about a lower sensitivity level or misoperation of fault component-based directional elements. To overcome this problem, a new control scheme is proposed to adjust sequence impedance angles of CIRESs by computing suitable current...

Charging Infrastructure and Grid Integration for Electromobility

Electric vehicle (EV) charging infrastructure will play a critical role in decarbonization during the next decades, energizing a large share of the transportation sector. This will further increase the enabling role of power electronics converters as an energy transition technology in the widespread adoption of clean energy sources and their...

Ultrasonically Powered and Controlled Microsystem for Dual-Wavelength Optogenetics with a Multi-Load Regulation Scheme

This letter presents an ultrasonically powered dual-wavelength optogenetic device that targets simultaneous excitation and inhibition of neural activities, or in a broader sense, optical stimulation in two distinct wavelengths for targeting different populations of neurons. This can be applied to a variety of neurological disorders. The...

A Single-Stage Regulating Voltage-Doubling Rectifier for Wireless Power Transfer

In this letter, a 6.78-MHz single-stage regulating voltage-doubling rectifier is presented for biomedical wireless power transfer (WPT) applications. Derived from a full-wave voltage doubler, a theoretical voltage conversion ratio (VCR) of 2 can be achieved, which benefits the end-to-end voltage gain of a biomedical WPT system with varying...

Cyber-Attack Detection and Countermeasure for Distributed Electric Springs for Smart Grid Applications

With increasing installations of grid-connected power electronic converters in the distribution network, there is a new trend of using distributed control in a cyber layer to coordinate the operations of these power converters for improving power system stability. However, cyber-attacks remain a threat to such distributed control. This paper...

Inductive Power Transfer based on Variable Compensation Capacitance to Achieve an EV Charging Profile with Constant Optimum Load

Wireless charging must be highly efficient throughout the entire battery charging profile to compete in the electric vehicle (EV) industry. Thus, optimum load matching is commonly used: it operates at the equivalent load that maximizes the efficiency, which depends on the coil's alignment. In this article, the optimum load is made independent...

A Mode-Switching Based Phase Shift Control for Optimized Efficiency and Wide ZVS Operations in Wireless Power Transfer Systems

This article proposes a mode-switching-based phase shift control (MS-PSC) for wireless power transfer (WPT) systems, which is able to achieve power regulation, load matching, and wide ZVS operations simultaneously without using additional dc-dc converters. Based on the mode transitions between the full-bridge, mixed-bridge, and half-bridge...

MPC Based Centralized Voltage and Reactive Power Control for Active Distribution Networks

The paper presents an approach for online centralized control in active distribution networks. It combines a proportional integral (PI) control unit with a corrective control unit (CCU), based on the principle of Model Predictive Control (MPC). The proposed controller is designed to accommodate the increasing penetration of distributed...

Voltage Source Converter Control under Distorted Grid Voltage for Hybrid AC-DC Distribution Links

Back-To-Back (B2B) Voltage Source Converter (VSC) with AC-side LCL filters can be adopted for parallel AC-DC distribution links. In this paper, Grid-side Current Control (GCC) for the inner/fast control loops of the front- and backend power electronics are implemented in order to enhance the system performance against grid disturbances. Herein,...

Discovering Clusters in Power Networks from Orthogonal Structure of Spectral Embedding

This paper presents an integrated approach to partition similarity graphs, the task that arises in various contexts in power system studies. The approach is based on orthogonal transformation of row-normalized eigenvectors obtained from spectral clustering to closely fit the axes of the canonical coordinate system. We select the number of...