Pages
- 1
- 2
- document
-
Shi, Rui (author), Wüthrich, D. (author), Chanson, Hubert (author)Continuing from the part 1 (Shi et al., 2022) this paper presents an experimental investigation of transient void fraction and bubble statistics in a highly turbulent breaking bore with Fr<sub>1</sub>=2.4. The measurements were conducted using a combination of dual-tip phase-detection probes and an ultra-high-speed video camera. The enclosed...journal article 2023
- document
-
Owen, C.C. (author), Hendrikse, H. (author)The manual application of universal (Rigsby) stage techniques is commonly used to determine the fabric of thin sections of ice viewed with crossed-polarized light. This process can require hours of focus in cold conditions to identify the c-axis of each grain in a thin section. Automated ice texture and fabric methods of several forms exist...journal article 2023
- document
-
Hendriks, P. (author), van Dijk, Kiki M. (author), Boekestijn, Bas (author), Broersen, Alexander (author), van Duijn-de Vreugd, Jacoba J. (author), Coenraad, Minneke J. (author), Dijkstra, J. (author), de Geus-Oei, L.F. (author), Burgmans, M.C. (author)Purpose: The primary objective of this study was to determine the feasibility of ablation margin quantification using a standardized scanning protocol during thermal ablation (TA) of hepatocellular carcinoma (HCC), and a rigid registration algorithm. Secondary objectives were to determine the inter- and intra-observer variability of tumor...journal article 2023
- document
-
de Vries, J.J. (author), Laan, Daphne M. (author), Frey, F.F.F. (author), Koenderink, G.H. (author), de Maat, Moniek P.M. (author)Fibrous networks are essential structural components of biological and engineered materials. Accordingly, many approaches have been developed to quantify their structural properties, which define their material properties. However, a comprehensive overview and comparison of methods is lacking. Therefore, we systematically searched for...journal article 2023
- document
-
van der Graaf, H. (author), Bertolini, Alessandro (author), van Heijningen, Joris (author), Bouwens, Bram (author), de Gaay Fortman, Nelson (author), van der Reep, Tom (author), Otemann, Lennart (author)The Rasnik system is a 3-point optical displacement monitor with sub-nanometer precision. The CCD-Rasnik alignment system was developed in 1993 for monitoring the alignment of the muon chambers of the ATLAS Muon Spectrometer at CERN. Since then, the development has continued as new CMOS imaging pixel chips became available. In this work the...journal article 2023
- document
-
Li, X. (author)Fatigue damage of composite laminates has attracted considerable attention from research community and industry, in view that laminated structures are inevitable to suffer from fatigue loading during their service life. It is rather complicated to understand and explain, what governs the initiation, accumulation, interaction (synergy or...doctoral thesis 2022
- document
-
Coudert-Osmont, Yoann (author), Eisemann, E. (author), Marroquim, Ricardo (author)Perspective cues play an important role in painting analysis as it may unveil important characteristics about the painter's techniques and creation process. Nevertheless, extracting perspective lines and their corresponding vanishing points is usually a laborious manual task. Moreover, small variations in the lines may lead to large variations...conference paper 2022
- document
-
Liang, M. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)This study aims to provide an efficient alternative for predicting creep modulus of cement paste based on Deep Convolutional Neural Network (DCNN). First, a microscale lattice model for short-term creep is adopted to build a database that contains 18,920 samples. Then, 3 DCNNs with different consecutive convolutional layers are built to learn...journal article 2022
- document
-
González, Elena (author), Balado Frías, J. (author), Arias, Pedro (author), Lorenzo, Henrique (author)The enrichment of the point clouds with colour images improves the visualisation of the data as well as the segmentation and recognition processes. Coloured point clouds are becoming increasingly common, however, the colour they display is not always as expected. Errors in the colouring of point clouds acquired with Mobile Laser Scanning are...journal article 2022
- document
-
Gong, X. (author), Daamen, W. (author), Bozzon, A. (author), Hoogendoorn, S.P. (author)City events are getting popular and are attracting a large number of people. This increase needs for methods and tools to provide stakeholders with crowd size information for crowd management purposes. Previous works proposed a large number of methods to count the crowd using different data in various contexts, but no methods proposed using...journal article 2021
- document
-
Klijn, M.E. (author), Hubbuch, Juergen (author)Imaging is increasingly more utilized as analytical technology in biopharmaceutical formulation research, with applications ranging from subvisible particle characterization to thermal stability screening and residual moisture analysis. This review offers a comprehensive overview of analytical imaging for scientists active in...journal article 2021
- document
-
Balado Frías, J. (author), Soilán, M. (author), Díaz-Vilarino, L. (author), van Oosterom, P.J.M. (author)Traffic signs are one of the most relevant road assets for driving, as the safety of drivers depends to a great extent on their correct location. In this paper two methods are compared for the segmentation of the sign and the pole supporting it. Both methods are based on the morphological opening to identify the sign points, the first one...journal article 2021
- document
-
From surface seismic data to reservoir elastic parameters using a full-wavefield redatuming approachGarg, A. (author), Verschuur, D.J. (author)Traditionally, reservoir elastic parameters inversion suffers from the overburden multiple scattering and transmission imprint in the local input data used for the target-oriented inversion. In this paper, we present a full-wavefield approach, called reservoir-oriented joint migration inversion (JMI-res), to estimate the high-resolution...journal article 2020
- document
-
Balado, Jesús (author), van Oosterom, P.J.M. (author), Díaz-Vilarino, L. (author), Meijers, B.M. (author)Many of the point cloud processing techniques have their origin in image processing. But mathematical morphology, despite being one of the most used image processing techniques, has not yet been clearly adapted to point clouds. The aim of this work is to design the basic operations of mathematical morphology applicable to 3D point cloud data,...journal article 2020
- document
-
Elkhuizen, W.S. (author), Dore-Callewaert, T.W.J. (author), Leonhardt, Emilien (author), Vandivere, Abbie (author), Song, Y. (author), Pont, S.C. (author), Geraedts, Jo M.P. (author), Dik, J. (author)A seventeenth-century canvas painting is usually comprised of varnish and (translucent) paint layers on a substrate. A viewer’s perception of a work of art can be affected by changes in and damages to these layers. Crack formation in the multi-layered stratigraphy of the painting is visible in the surface topology. Furthermore, the impact of...journal article 2019
- document
-
Hoozemans, J.J. (author), de Jong, Rob (author), van der Vlugt, Steven (author), van Straten, J. (author), Elango, Uttam Kumar (author), Al-Ars, Z. (author)This paper presents and evaluates an approach to deploy image and video processing pipelines that are developed frame-oriented on a hardware platform that is stream-oriented, such as an FPGA. First, this calls for a specialized streaming memory hierarchy and accompanying software framework that transparently moves image segments between...journal article 2019
- document
-
Meijer, D.W.J. (author), Scholten, L. (author), Clemens, F.H.L.R. (author), Knobbe, Arno (author)Sewer pipes are commonly inspected in situ with CCTV equipment. The CCTV footage is then reviewed by human operators in order to classify defects in the pipes and make a recommendation on possible interventions. This process is both labor-intensive and error-prone. Other researchers have suggested machine learning techniques to (partially)...journal article 2019
- document
-
Gao, Yuan (author), Qiao, Tiezhu (author), Zhang, Haitao (author), Yang, Yi (author), Pang, Y. (author), Wei, Hongyan (author)During the operation of the belt conveyor, measuring speed of the belt conveyor is vital to the safe and efficient operation. In the existing measuring speed system, the measurement instrument is required contacting with the surface of the belt. The contact measurement method cannot avoid the occurrence of measuring error caused by slipping...journal article 2019
- document
-
Pasqualetto Cassinis, L. (author), Fonod, R. (author), Gill, E.K.A. (author)The relative pose estimation of an inactive target by an active servicer spacecraft is a critical task in the design of current and planned space missions, due to its relevance for close-proximity operations, i.e. the rendezvous with a space debris and/or in-orbit servicing. Pose estimation systems based solely on a monocular camera are...review 2019
- document
-
Masaya, S. (author), Eric Verschuur, D. J. (author)This paper proposes a reflectivity constraint for velocity estimation to optimally solve the inverse problem for active seismic imaging. This constraint is based on the velocity model derived from the definition of reflectivity and acoustic impedance. The constraint does not require any prior information of the subsurface and large extra...journal article 2018
Pages
- 1
- 2