Searched for: subject%3A%22process%22
(1 - 20 of 48)

Pages

document
Li, Y. (author), Song, Y. (author), Horvath, I. (author), Opiyo, E.Z. (author), Zhang, G. (author)
In the designing and modeling of CPSs, the information acquisition and processing processes are often application dependent and process oriented. Those information management frameworks are simple and effective for small scale systems. However, many functions developed are not reusable or cannot be directly re-used, when a large number of...
conference paper 2014
document
Zhang, H. (author), Wahls, S. (author), Brühl, M. (author)
In the past decade, observations in the German estuaries such as the rivers Elbe and Weser show increasingly serious damage to bank protection structures (groins and revetments). This damage is caused mainly by waves induced by the passing of big container ships in the shallow and narrow maritime waterways. These ship-induced 3D wave fields...
conference paper 2021
document
Zhang, H. (author), Wahls, S. (author), Brühl, M. (author)
In the past decade, observations in the German estuaries such as the rivers Elbe and Weser show increasingly serious damage to bank protection structures (groins and revetments). This damage is caused mainly by waves induced by the passing of big container ships in the shallow and narrow maritime waterways. These ship-induced 3D wave fields...
conference paper 2021
document
Chang, Z. (author), Zhang, H. (author), Schlangen, E. (author), Šavija, B. (author)
The aim of this work is to investigate the fracture process of concrete under various boundary conditions. Although numerous concrete fracture tests have been reported, showing the failure behavior of concrete, their evaluation is ambiguous due to the limitations of specimen size and experimental conditions. Therefore, it is necessary to use...
conference paper 2019
document
Slob, E.C. (author), Zhang, L. (author)
Elimination of multiples from acoustic reflection data is important to reduce the effect of their presence in velocity model building and subsequent imaging. Many processing schemes assume only primary reflection events are present in the data. Free-surface multiple elimination is an established technology, but internal multiple elimination is...
conference paper 2019
document
Zhang, Kaiwen (author), Coutino, Mario (author), Isufi, E. (author)
Graph sampling strategies require the signal to be relatively sparse in an alternative domain, e.g. bandlimitedness for reconstructing the signal. When such a condition is violated or its approximation demands a large bandwidth, the reconstruction often comes with unsatisfactory results even with large samples. In this paper, we propose an...
conference paper 2021
document
Middelburg, L.M. (author), el Mansouri, B. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author), Poelma, René H. (author)
In this work a method is described to investigate process variations across a wafer. Through wafer MEMS spiral resonators were designed, simulated, fabricated and characterized by measuring the eigenfrequency and corresponding mode shapes. Measuring the eigenfrequency and resulting spectral behavior of resonators on different locations on the...
conference paper 2017
document
Lv, Guoping (author), Yan, Haidong (author), Yan, Haidong (author), Yang, Daoguo (author), Wu, Xinke (author), Sheng, Kuang (author), Liu, Chaohui (author), Zhang, Yakun (author), Zhang, Kouchi (author)
As a key heat-dissipating and electrical interconnecting component in high-temperature power modules, die-attach and substrate-attach layers play an important role in effectively reducing the thermal resistance and improving the long-term reliability. Traditional substrate-attach materials limit the high-temperature applications of packaging...
conference paper 2022
document
Zhang, Zheming (author), Wang, Fang (author), Pang, Y. (author), Yan, Gaowei (author)
The problem of misalignment of the original measurement model is caused by nonlinear, time-varying characteristic of the batch process. In this paper, a method based on geodesic flow kernel (GFK) for feature transfer is proposed. By mapping data into the manifold space, the feature transfer from source domain to target domain is implemented....
conference paper 2020
document
Sattari, R. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author)
This study presents a novel manufacturing process and design towards an enhanced sensitivity of an in-package relative humidity sensor. The device comprises multi-width interdigital electrodes which make oxide pillars appear during wet chemical etching in the fabrication process. Those oxide pillars appear only in wider areas while completely...
conference paper 2023
document
Inamdar, A.S. (author), Hauck, Torsten (author), van Soestbergen, Michiel (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Model order reduction techniques are developed and utilized to make numerical simulations more efficient. The use of Reduce Order Models (ROM) also enables data exchange with external parties without disclosing the sensitive information present in a Full-Order Model (FOM). It is crucial to optimize for both the efficiency and accuracy of a ROM...
conference paper 2024
document
Zhang, J. (author)
Recently, flexible, wearable and disposable electronics have attracted a lot of attention. Printing enables low-cost fabrication of circuits on flexible substrates. Printed organic and metal oxide thin-film transistors (TFTs) have been researched intensively due to the ease of solution-processing. But their carrier mobility and reliability are...
doctoral thesis 2015
document
Zhang, L. (author)
The research in ultrasonic processing for metallurgical application shows a promising influence on improving casting properties of aluminium alloys. The principle of ultrasonic processing is introduction of acoustic waves with a frequency higher than 17 kHz into liquid metal. Several promising beneficial effects caused by ultrasonic processing...
doctoral thesis 2013
document
Zhang, B. (author)
In the financial world, two tasks are of prime importance: model calibration and portfolio hedging. For both tasks, efficient option pricing is necessary, particularly for the calibration where many options with different strike prices and different maturities need to be priced at the same time. Therefore, a fast yet accurate pricing method is a...
doctoral thesis 2012
document
Zhang, D. (author)
For exploration and development of the earth, seismic surveys are acquired to provide information about the subsurface, within specifications of accuracy set by geologists and engineers, and within business constraints on budgets and turn-around time for processing and interpretation of the data. The case of seismic surveys that are acquired,...
doctoral thesis 2022
document
Zhang, B. (author), Oosterlee, C.W. (author)
We propose an efficient pricing method for arithmetic and geometric Asian options under exponential Lévy processes based on Fourier cosine expansions and Clenshaw–Curtis quadrature. The pricing method is developed for both European style and American-style Asian options and for discretely and continuously monitored versions. In the present paper...
journal article 2013
document
Lakerveld, R. (author), Benyahia, B. (author), Heider, P.L. (author), Zhang, H. (author), Braatz, R.D. (author), Barton, P.I. (author)
The judicious use of buffering capacity is important in the development of future continuous pharmaceutical manufacturing processes. The potential benefits are investigated of using optimal-averaging level control for tanks that have buffering capacity for a section of a continuous pharmaceutical pilot plant involving two crystallizers, a...
journal article 2013
document
Blanter, Y.M. (author), Carmiggelt, J.J. (author), Cotofana, S.D. (author), Hamdioui, S. (author), Nikitin, A. A. (author), Reimann, T. (author), Sharma, S. (author), van der Sar, T. (author), Zhang, X. (author)
Magnonics addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operation in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still...
journal article 2022
document
van der Neut, J.R. (author), Brackenhoff, J.A. (author), Meles, G.A. (author), Zhang, L. (author), Slob, E.C. (author), Wapenaar, C.P.A. (author)
A Green's function in an acoustic medium can be retrieved from reflection data by solving a multidimensional Marchenko equation. This procedure requires a priori knowledge of the initial focusing function, which can be interpreted as the inverse of a transmitted wavefield as it would propagate through the medium, excluding (multiply)...
journal article 2022
document
Jiang, Jing (author), Chen, Wei (author), Qian, Yichen (author), Meda, Abdulmelik H. (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
Considerable advancements in power semiconductor devices have resulted in such devices being increasingly adopted in applications of energy generation, conversion, and transmission. Hence, we proposed a fan-out panel-level packaging (FOPLP) design for 30-V Si-based metal-oxide-semiconductor field-effect transistor (MOSFET). To achieve...
journal article 2023
Searched for: subject%3A%22process%22
(1 - 20 of 48)

Pages