Searched for: subject:"process"
(1 - 20 of 24)

Pages

document
Veitch, D.E. (author), Bochner, Melissa (author), Fellner, Lilian (author), Leigh, Christopher (author), Owen, Harry (author)
Our objective was to design, develop and validate better clinical breast examination (CBE) models addressing the deficiencies of previous models. Detailed research and a
methodological design approach led to the development of a new technique for creating lifelike models for teaching CBE. Six multi-layered breast models representing a range...
journal article 2018
document
Alsema, Erik (author), Anink, David (author), Meijer, A. (author), Straub, A. (author), Donze, Geurt (author), van Hulten, Saskia (author)
Sustainable development has been the focus of all major industries in the world, especially in the construction industry. As one of the sustainable construction modes, housing industrialization (HI) is now absorbing a growing number of attentions that lead the industry to go green. However, the implementation of HI in China is far from...
conference paper 2017
document
Barati, B. (author), Karana, E. (author), Hekkert, P.P.M. (author), Jönsthövel, I. (author)
In response to the urge for multidisciplinary development of computational composites, designers and material scientists are increasingly involved in collaborative projects to valorize these technology-push materials in the early stages of their development. To further develop the computational composites, material scientists need designer’s...
conference paper 2015
document
Konstantinou, T. (author)
Over the next decade investment in building energy savings needs to increase, together with the rate and depth of renovations, to achieve the required reduction in buildingrelated CO2 emissions. Although the need to improve residential buildings has been identified, guidelines come as general suggestions that fail to address the diversity of...
journal article 2015
document
Konstantinou, T. (author)
Over the next decade investments in buildings energy saving need to increase, together with the rate and depth of renovations, to achieve the required reduction in buildings related CO2 emissions. Although the need to improve residential buildings has been identified, guidelines come as general suggestion that fail to address the diversity of...
conference paper 2015
document
Moes, C.C.M. (author)
Digital human models are often used for ergonomic analysis of product designs, before physical prototypes are available. However, existing digital human models cannot be used to simultaneously: 1) consider the tissue loads and the physiological effects of the tissue loads; 2) optimise the product properties. This paper develops multi-dimensional...
journal article 2015
document
Van Dooren, E.J.G.C. (author), Willekens, L.A.M. (author)
Urban and regional design are fundamental skills in the field of urban studies. Designing is a complex, personal, creative and open-ended skill. Performing a well-developed skill is mainly an implicit activity. In teaching, however, it is essential to make explicit what to do. Learning a complex skill like designing, is a matter of doing and...
conference paper 2014
document
Langeveld, L.H. (author)
A workshop Product Design for Elderly was held in Beijing and organized by the School of Digital Media and Design, Beijing University of Posts and Telecommunications. A domestic appliances company had sponsored a part of the workshop and brought in the topics. The objectives of the workshop were creating a product design by each design team. and...
conference paper 2014
document
Konstantinou, T. (author), Knaack, U. (author)
Given the very low renewal rate of the building stock, the efforts to reduce energy demand must focus on the existing residential buildings. Even though awareness has been raised, the effect on energy efficiency is often neglected during the design phase of refurbishment projects. This paper discusses an integrated approach to energy-efficiency...
conference paper 2013
document
Stellingwerff, M.C. (author), Koorstra, P.A. (author)
This year we celebrate the tenth anniversary of our Computer Aided Manufacturing laboratory (CAMlab, http://www.camlab-bk.nl). From the start we provide laser cutting, CNC-milling and 3D-print facilities for the students and the researchers at the Faculty of Architecture in Delft. Over the past ten years we have delivered uncountable amounts of...
conference paper 2013
document
Coimbra, E. (author), Romao, L. (author)
This study was accomplished in the context of a broader research to be developed in an ongoing PhD program in architecture. The purpose of this study is to give a perspective of the research progress and to present a shape grammar simplification that will be improved to assist the rehabilitation design process of the bourgeois house of Oporto...
conference paper 2013
document
El Ahmar, S. (author), Fioravanti, A. (author), Hanafi, M. (author)
Biomimicry, where nature is emulated as a basis for design, is a growing area of research in the fields of architecture and engineering. The widespread and practical application of biomimicry as a design approach remains however largely unrealized. A growing body of international research identifies various obstacles to the employment of...
conference paper 2013
document
Pasman, G.J. (author), Romero Herrera, N.A. (author)
What if both design students and design tutors could have real-time insights into how students actually experience their design process rather than after-the-fact reflections? And what if these insights could be applied in ways that would contribute to more in-depth learning experiences? This paper addresses these questions in describing the...
conference paper 2013
document
Van Boeijen, A.G.C. (author)
This paper answers the question, how the dimensions that have been developed by anthropologists to typify cultures, can support designers in user-centred design processes. An analysis and evaluation of the use of cultural dimensions in design projects was performed. Although many of the dimensions found in the literature appear relevant for...
conference paper 2013
document
Van Dooren, E.J.G.C. (author), Boshuizen, E. (author), Van Merrienboer, E. (author), Asselbergs, M.F. (author), Van Dorst, M.J. (author)
In general, designing is conceived as a complex, personal, creative and open-ended skill. Performing a well-developed skill is mainly an implicit activity. In teaching, however, it is essential to make explicit. Learning a complex skill like designing is a matter of doing and becoming aware how to do it. For teachers and students therefore, it...
journal article 2013
document
Nik Ahmad Ariff, N.S. (author), Badke-Schaub, P.G. (author), Eris, O. (author)
The present study investigates the relation between sketching and communication in teams during the idea generation process in early concept generation. A quasi-experiment study has been conducted with Masters students of Industrial Design Engineering at Delft University of Technology, Netherlands. Six groups consisting of three students had to...
conference paper 2012
document
Van Dooren, E.J.G.C. (author)
Designing is a complex, personal, creative and openended skill. How can teachers help students in learning to design?
conference paper 2011
document
Dissanayake, G. (author), Sinha, P. (author)
There has been a significant increase in volume of new clothing sales over the last ten years; indeed it is the fastest growing waste in household waste stream, raising the potential for a similar increase in volume of textile waste dispose in landfill sites and the resultant harm to the environment. As volume of throwaway fashion increases and...
conference paper 2010
document
Verlinden, J.C. (author), Horvath, I. (author)
The use of tangible objects is paramount in industrial design. Throughout the design process physical prototypes are used to enable exploration, simulation, communication, and specification of designs. Although much is known about prototyping skills and technologies, the reasons why and how such models are employed in design practice are poorly...
journal article 2009
document
Hubers, J.C. (author)
In this PhD research a method and software prototype is developed for COLlaborative Architectural Design In VIRtual reality. The method consists of developing versions of a concept for a building and the evaluation of them with criteria. Every team member makes his own versions; otherwise they would destroy each others work. They can evaluate...
doctoral thesis 2008
Searched for: subject:"process"
(1 - 20 of 24)

Pages