Searched for: subject%3A%22pyrolysis%22
(1 - 20 of 42)

Pages

document
Patibandla, Akul Sai (author)
There is an increase in the amount of CO2 emissions in the past few decades and the process of capturing it back is at a much lower rate. The need of the hour is to reduce the emission rate or even avoid producing them in certain aspects. There is a transition towards renewable energy sources<br/>that could help us maintain the balance required....
master thesis 2023
document
Stroo, Aike (author)
Methane pyrolysis is a technology that has the potential to greatly reduce the CO2 emissions of hydrogen production on a large scale. The process generates solid carbon instead of gaseous, thereby inhibiting emissions and has a relatively low process energy demand.<br/><br/>A three-step approach was taken to investigate the feasibility of...
master thesis 2023
document
Al-Sabaeei, Abdulnaser M. (author), Alhussian, Hitham (author), Abdulkadir, Said Jadid (author), Giustozzi, Filippo (author), Napiah, Madzlan (author), Jagadeesh, A. (author), Sutanto, Muslich (author), Memon, Abdul Muhaimin (author)
The optimization of energy consumption during asphalt mixture production and compaction is a challenge in producing durable, sustainable, and environmentally friendly asphalt products. This study investigated the effects of crude palm oil (CPO) and/or tire pyrolysis oil (TPO) on shear viscosity and mixing and compaction temperatures of...
journal article 2023
document
He, Songbo (author), Kramer, Thomas Sjouke (author), Klein, Frederike Gerda Hiltje (author), Chandel, Anshu (author), Tegudeer, Zhuorigebatu (author), Heeres, Andre (author), Liu, C. (author), Pidko, E.A. (author), Heeres, Hero Jan (author)
The catalytic conversion of glycerol to aromatics (GTA, e.g., benzene, toluene, and xylenes, BTX) over a shaped H-ZSM-5/Al<sub>2</sub>O<sub>3</sub> (60/40 wt%) catalyst was investigated in a continuous fixed-bed reactor to study the addition of the Al<sub>2</sub>O<sub>3</sub> binder in the catalyst formulation on catalyst performance. The...
journal article 2022
document
Ren, S. (author), Liu, X. (author), Lin, P. (author), Erkens, S. (author)
This study investigated the effects of swelling-degradation degree on the rheological properties and thermal pyrolysis behaviors of crumb rubber modified bitumen (CRMB). The equilibrium viscosity of CRMB in 160 ◦Cswelling process is 10.5 Pa·s at 8 h. During the 200℃-degradation procedure, the viscosity increased to a maximum value of 20.58 Pa·s...
journal article 2022
document
Ren, Mengmeng (author), Kang, Yi (author), Zhao, Junxue (author), Zou, Chong (author), Shi, Ruimeng (author), Li, Bin (author), Roekaerts, D.J.E.M. (author)
Oxy-fuel combustion of coal pyrolysis gas has recently been proposed to serve as internal heat source of a vertical low-temperature pyrolysis furnace, in order to make the output pyrolysis gas nearly free of nitrogen and widely useful. To keep the pyrolysis temperature and the heat carrier gas volume unchanged from air combustion to oxy-fuel...
journal article 2022
document
Tafjord, Joakim (author), Regli, Samuel K. (author), Dugulan, A.I. (author), Rønning, Magnus (author), Rytter, Erling (author), Holmen, Anders (author), Myrstad, Rune (author), Yang, J. (author)
Transition metals supported on carbons play an important role in catalysis and energy storage. By pyrolysis of metal alginate, highly active catalysts for the Fischer-Tropsch synthesis (FTS) can be produced. However, the evolution of the carbon (alginate) and transition metal (Fe<sup>3+</sup>) during pyrolysis remains largely unknown and was...
journal article 2022
document
Kuo, P.C. (author), Illathu Kandy, B. (author), Özdemir, F. (author), Woudstra, T. (author), Aravind, P.V. (author)
Biochar derived from pyrolysis or gasification has been gaining significant attention in the recent years due to its potential wide applications for the development of negative emissions technologies. A new concept was developed for biochar and power co-generation system using a combination of biomass pyrolysis (BP) unit, solid oxide fuel cells ...
journal article 2022
document
Wang, Fu (author), Zhu, Hongbin (author), Li, Yuanyuan (author), Gu, Dengjun (author), Gao, Y. (author), Feng, Jianlin (author), Shu, Benan (author), Li, Chao (author), Wu, Shaopeng (author)
Conventional asphalt mixture has poor microwave absorbing performance and microwave heating efficiency. Based on the characteristics of dielectric loss of scrap tire pyrolysis carbon black (PCB), it is proposed to improve the microwave absorbing performance and self-healing rate of bitumen. The phase composition and electromagnetic parameters...
journal article 2022
document
Setiadji, Bagus Hario (author), Wibowo, M. Agung (author), Jonkers, H.M. (author), Ottele, M. (author), Qomaruddin, Mochammad (author), Sugianto, Felix Hariyanto (author), Lie, Han Ay (author)
Asphalt pavement consists of aggregates resulting in a waste material at end of its life. The aggregates can be reused as basic material for asphalt or cementitious binding agents. In both scenarios, the recycled aggregates should provide a good bond with the binder to achieve strength. This study focuses on reusing recycled asphalt...
journal article 2022
document
Ravi, Pradeep (author)
Biochar for horticultural and agricultural applications using high temperature torrefaction technology Pradeep Ravi Supervisors: Prof Dr. D.J.E.M Roekaerts, ir.Bart de Vries, Dr. Luis Cutz, Dr.Lorenzo Botto &amp; Dr.Ralph Lindeboom Biomass currently accounts for less than 10 percentage of the world’s renewable energy production. Currently the...
master thesis 2021
document
He, Songbo (author), Zuur, Kenny (author), Santosa, Dian Sukmayanda (author), Heeres, Andre (author), Liu, C. (author), Pidko, E.A. (author), Heeres, Hero Jan (author)
The catalytic conversion of pure glycerol to bio-aromatics (bio-BTX) over an un-modified H-ZSM-5 (SiO<sub>2</sub>/Al<sub>2</sub>O<sub>3</sub> molar ratio of 23) via an ex-situ catalytic pyrolysis approach in a continuous tandem-micro reactor at a scale of 1 g glycerol h<sup>−1</sup> was investigated. A BTX peak carbon yield of 28.1 ± 0.2 %...
journal article 2021
document
Tsekos, C. (author), Tandurella, S. (author), de Jong, W. (author)
As the push towards more sustainable ways to produce energy and chemicals intensifies, efforts are needed to refine and optimize the systems that can give an answer to these needs. In the present work, the use of neural networks as modelling tools for lignocellulosic biomass pyrolysis main products yields estimation was evaluated. In order to...
journal article 2021
document
Gonzalez Veugelers, Valente (author)
It is possible to recover and maintain the value of urban solid waste (USW) through the implementation of circular economy practices in the waste management strategy. This can have social, economic and environmental benefits. One of the most noticeable benefits is the reduction landfilled USW. To achieve this it is necessary to, firstly,...
master thesis 2020
document
van Beek, Max (author)
Presently, the majority of the worlds energy supply is dependent on fossil fuels. As these fuels area limited resource and have significant negative side effects, the way humanity uses these is unsustainable and other sources of energy have to be found. One of these sustainable energy sources is plant-derived biomass. However, biomass cannot be...
bachelor thesis 2020
document
Kwakkenbos, Maarten (author)
The effort to reduce global anthropogenic carbon dioxide emissions has caused a growing interest in the use of sustainable energy sources. One of the potentially sustainable energy sources considered as an alternative for the currently used fossil sources is biomass. Biomass is organic matter that originates from plants or animals which can be...
master thesis 2020
document
Tsekos, C. (author), Anastasakis, K. (author), Schoenmakers, P.L. (author), de Jong, W. (author)
The present work focuses on the sampling procedure and quantification of the PAH yield from the fast pyrolysis of waste softwood. In particular, fast pyrolysis experiments were conducted using a CDS Pyroprobe 5200 at temperatures between 500 °C and 1000 °C, at a heating rate of 600 °C/s for a sample size of 30 mg. High performance liquid...
journal article 2020
document
Dong, Xu (author), Shen, Luyi (author), Zhao, Jianpeng (author), Liu, Xuefeng (author), Sun, Yuli (author), Golsanami, Naser (author), Wang, Fei (author), Bi, Haisheng (author), Zitha, P.L.J. (author)
Complete and thorough core cleaning is a critical prerequisite for the precise measurements of most rock's petrophysical parameters. In shale, the oil cleaning process, aimed to remove the volatile hydrocarbons, is often complicated by the requirement for intact solid organic. Evaluation of shale's cleaning methods needs to take structural...
journal article 2020
document
Yáñez, Édgar (author), Meerman, Hans (author), Ramirez, Andrea (author), Castillo, Édgar (author), Faaij, Andre (author)
The oil industry needs to reduce CO<sub>2</sub> emissions across the entire lifecycle of fossil fuels to meet environmental regulations and societal requirements and to sustain its business. With this goal in mind, this study aims to evaluate the CO<sub>2</sub> mitigation potential of several bio-oil co-processing pathways in an oil refinery....
journal article 2020
document
Anca-Couce, Andrés (author), Tsekos, C. (author), Retschitzegger, Stefan (author), Zimbardi, Francesco (author), Funke, Axel (author), Banks, Scott (author), Kraia, Tzouliana (author), Marques, Paula (author), Scharler, Robert (author), de Jong, W. (author), Kienzl, Norbert (author)
The large variations found in literature for the activation energy values of main biomass compounds (cellulose, hemicellulose and lignin) in pyrolysis TGA raise concerns regarding the reliability of both the experimental and the modelling side of the performed works. In this work, an international round robin has been conducted by 7 partners...
journal article 2020
Searched for: subject%3A%22pyrolysis%22
(1 - 20 of 42)

Pages