Searched for: subject%3A%22sensitivity%255C+study%22
(1 - 9 of 9)
document
PENG, Yi-Kai (author)
Boundary Layer Ingestion (BLI) is a promising propulsion concept for aviation, aiming to reduce fuel burn. This configuration involves using the propulsor to ingest the boundary layer from the fuselage or wing. Typically, aircraft with BLI propulsors also integrate a hybrid-electric powertrain. This integrated setup has shown potential in fuel...
master thesis 2023
document
Rutten, Daniël (author)
master thesis 2023
document
van Suijlen, Quint (author)
The increased consciousness of the negative impact of human-induced climate change has resulted in rapid developments within the offshore wind industry. With Wind Turbine Generators (WTGs) becoming increasingly larger and available shallow water sites becoming scarcer, new offshore wind solutions must be developed to accomplish the goals set by...
master thesis 2023
document
Navardauskas Palaima, Kostas (author)
With increasing adoption of modular construction in the residential sector, its adoption in the Dutch healthcare sector is studied. Whilst the initial costs can be higher, this method of construction claims to have cost benefits over conventional construction. These are the benefits of construction speed and residual value at the end of lifespan...
master thesis 2021
document
Chang, L. (author), Messali, F. (author), Esposito, R. (author)
Investigations of post-seismic events show that the collapse of walls in out-of-plane (OOP) two-way bending can be one of the most predominant failure mechanisms for unreinforced masonry (URM) structures. To assess the force capacity of URM walls in OOP two-way bending, various analytical formulations have been developed during past decades....
journal article 2020
document
Bedon, Chiara (author), Louter, P.C. (author)
In this paper, careful consideration is paid for structural glass elements under fire loading. In particular, a thermo-mechanical Finite Element (FE) numerical investigation is carried out in ABAQUS on small-scale structural glass elements exposed to fire. Taking advantage of past literature efforts, major thermal effects on the material...
conference paper 2018
document
Pfeifle, Ole (author)
Curved exhaust ducts are used in aero engine applications for different purposes, including thrust vectoring, shielding of parts from the exhaust or improving stealth properties. Their integration, however, regularly represents a design problem due to flow separation and high aerodynamic losses occurring in the bend. Curved duct flows for both...
master thesis 2017
document
Boekhout, S.G. (author)
Polymer flooding can significantly improve the sweep efficiency in heterogeneous reservoirs compared to a water flood. This is caused by the improved mobility of the polymer flood, which has an effect on the crossflow mechanisms caused by viscous, capillary and gravitational forces in the reservoir. However it is not yet fully understood how the...
master thesis 2015
document
Van der Mersch, W.A. (author)
One of the tests in the ESECMaSE project is the large scale earthquake test on a building. The finite element model that is discussed in this thesis is based on this pseudo-dynamic test. The material model follows from a macro modelling approach and has smeared-cracks. The mode shape and eigenfrequencies are obtained through an eigenvalue...
master thesis 2015
Searched for: subject%3A%22sensitivity%255C+study%22
(1 - 9 of 9)