- document
-
Luo, Runding (author), Hu, D. (author), Qian, Cheng (author), Liu, Xu (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)Nano-metal materials have received considerable attention because of their promising performance in wide bandgap semiconductor packaging. In this study, molecular dynamics (MD) simulation was performed to simulate the nano-Cu sintering mechanism and the subsequent mechanical behaviors. Hybrid sintering, comprising nanosphere (NS) and...journal article 2024
- document
-
Della Pia, A. (author), Michelis, Theodorus (author), Chiatto, Matteo (author), Kotsonis, M. (author), De Luca, Luigi (author)This study reports the first time-resolved particle image velocimetry characterization of a planar two-phase mixing layer flow, whose velocity field is measured simultaneously in gas and liquid streams. Two parallel air and water flows meet downstream of a splitter plate, giving rise to an initially spanwise invariant configuration. The aim...journal article 2024
- document
-
Manchester, Emily Louise (author), Pirola, S. (author), Pirola, Sergio (author), Mastroiacovo, Giorgio (author), Polvani, Gianluca (author), Pontone, Gianluca (author), Xu, Xiao Yun (author)Aortic valve disease is often treated with bioprosthetic valves. An alternative treatment is aortic valve neocuspidization which is a relatively new reparative procedure whereby the three aortic cusps are replaced with patient pericardium or bovine tissues. Recent research indicates that aortic blood flow is disturbed, and turbulence effects...journal article 2024
- document
-
Chen, Wei (author), Liu, Xu (author), Hu, D. (author), Liu, X. (author), Zhu, Xi (author), Fan, Xuejun (author), Zhang, Kouchi (author), Fan, J. (author)During operation in environments containing hydrogen sulfide (H<sub>2</sub>S), such as in offshore and coastal environments, sintered nanoCu in power electronics is susceptible to degradation caused by corrosion. In this study, experimental and molecular dynamics (MD) simulation analyses were conducted to investigate the evolution and...journal article 2024
- document
-
Bugeat, B. (author), Boldini, P.C. (author), Hasan, A.M. (author), Pecnik, Rene (author)This paper addresses the stability of plane Couette flow in the presence of strong density and viscosity stratifications. It demonstrates the existence of a generalised inflection point that satisfies the generalised Fjørtoft criterion of instability when a minimum of kinematic viscosity is present in the base flow. The characteristic scales...journal article 2024
- document
-
van Keulen, D.C. (author)The thixotropic properties of contemporary mortars allow the insertion of mortar in small vertical seams by using a mortar pump without the need for traditional formwork. In such a seam, a vertical mortar connection for the transfer of shear forces can be created by simply adding a profile to the mortar-to-concrete interfaces. In this way a...doctoral thesis 2023
- document
- Liu, X. (author) doctoral thesis 2023
- document
-
de Sousa, Alex Micael Dantas (author), Lantsoght, E.O.L. (author), Debs, Mounir Khalil El (author)Reinforced concrete one-way slabs under concentrated loads can develop different shear failure mechanisms: as wide beams in one-way shear, punching shear around the load or a mixed mode between them. Until now, most publications presented recommendations to assess the shear capacity considering only the one-way shear failure mechanism. This...journal article 2023
- document
-
Dantas de Sousaa, Alex Micael (author), Lantsoght, E.O.L. (author), de Lima Araújo, Daniel (author), Pereira Pradoe, Lisiane (author), Debs, Mounir Khalil El (author)This study describes a set of recommendations to improve the precision of shear and punching shear capacity predictions for one-way slabs under concentrated loads, regardless of the governing failure mechanism, using the ABNT NBR 6118:2014 code provisions. For this purpose, a database of 143 test results was developed, including one-way slabs...journal article 2023
- document
-
Ponzoni, Elisa (author), Muraro, S. (author), Nocilla, Alessandra (author), Jommi, C. (author)This study characterises the effects of naturally varying organic content on the compression and shear behaviour of a marine silty-clay from the Netherlands. Index properties and mechanical properties are determined through laboratory tests, including oedometer and multistage loading-unloading triaxial stress paths. The results indicate a...journal article 2023
- document
-
Tijs, B.H.A.H. (author), Dávila, C. G. (author), Turon, A. (author), Bisagni, C. (author)The work presented in this paper investigates the ability of continuum damage models to accurately predict matrix failure and ply splitting. Two continuum damage model approaches are implemented that use different stress–strain measures. The first approach is based on small-strain increments and the Cauchy stress, while the second approach...journal article 2023
- document
-
Cupać, Jagoda (author), Louter, P.C. (author), Nussbaumer, Alain (author)In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state is normally associated with extensive yielding of the reinforcement, providing a safe...journal article 2023
- document
-
Guo, Z. (author), Qiu, Jingping (author), Jiang, Haiqiang (author), Zhu, Qiang (author), Wang Kwek, Jin (author), Ke, Lin (author), Qu, Zhengyao (author)The fresh superfine-tailings cemented paste backfill (SCPB) exhibits strong thixotropy, but quantification of the resulting transient flow (non-steady state) and time-dependent yield stress is lacking. In this study, a simple qualitative model was developed to describe the transient flow and time-dependent yield stress of SCPB. The effect of...journal article 2023
- document
-
Lantsoght, E.O.L. (author)One of the barriers to implementation of steel fiber reinforced concrete (SFRC) into structural applications is the lack of understanding of the shear behaviour of SFRC members. This paper proposes a theoretical model for the shear capacity of SFRC members with mild steel reinforcement based on the shear-carrying mechanisms and sectional...journal article 2023
- document
-
de Sousa, Alex M.D. (author), Lantsoght, E.O.L. (author), El Debs, Mounir K. (author)One-way slabs under concentrated loads may fail by one-way shear, two-way shear, flexure, or a combination of these modes. This paper reviews shear and punching shear-failure mechanisms of one-way slabs under concentrated loads tested from the literature and investigates the accuracy of different approaches to predict the ultimate capacity...journal article 2023
- document
-
Liu, S. (author), Sinke, J. (author), Dransfeld, C.A. (author)The bias-extension test is one of the test methods to characterise the intra-ply shear behaviour of continuous fibre reinforced composites including fabrics and unidirectional (UD) materials. For the determination of the major mechanical properties of metals, often a uniaxial tensile test is used. Combination of these two methods for the...journal article 2023
- document
-
Banis, Alexandros (author), Gomez, Andrea (author), Bliznuk, Vitaliy (author), Dutta, Aniruddha (author), Sabirov, Ilchat (author), Petrov, R.H. (author)This study focuses on the microstructure's evolution upon different aging conditions of a high-strength low-density steel with a composition of Fe–28Mn–9Al–1C. The steel is hot rolled, subsequently quenched without any solution treatment, and then aged under different conditions. The microstructure of the samples was studied by means of...journal article 2023
- document
-
Apostolidis, P. (author), Porot, Laurent (author)Bituminous binders are foreseen as colloidal dispersed systems characterised by high chemical complexity containing a plethora of molecules classified into maltenes and asphaltenes. The effect of these fractions on the overall response of bituminous binders remains elusive. This research selected two binders from the same refinery but with...journal article 2023
- document
-
Konstadinou, M. (author), Herrier, G. (author), Stoutjesdijk, T. (author), Losma, F. (author), Zwanenburg, C. (author), Dobbe, R. (author)This study aimed to assess the suitability of lime treatment for use in dikes in the Netherlands. The effect of this technique on the behavior of a Dutch clay was addressed by comparing the detailed response of lime-treated and natural samples at different lime contents (1.25% and 2.25%) and curing periods. A series of laboratory tests...journal article 2023
- document
-
Tziotziou, Aikaterini (author), Hartman, Eline (author), Korteland, Suze Anne (author), van der Lugt, Aad (author), van der Steen, A.F.W. (author), Daemen, Joost (author), Bos, Daniel (author), Wentzel, Jolanda (author), Akyildiz, A.C. (author)Background and aims: Atherosclerotic plaque onset and progression are known to be affected by local biomechanical factors. While the role of wall shear stress (WSS) has been studied, the impact of another biomechanical factor, namely mechanical wall stress (MWS), remains poorly understood. In this study, we investigated the association of MWS...journal article 2023