Searched for: subject%3A%22steel%22
(1 - 20 of 33)

Pages

List view
Grid view
document
Faucon, L.E.K. (author), Boot, T. (author), Riemslag, A.C. (author), Scott, S.P. (author), Liu, Ping (author), Popovich, V. (author)
In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry that mimics a small-scale pipeline with high internal hydrogen gas pressure. The effect of hydrogen...
journal article 2023
document
Xin, Haohui (author), Liu, Jielin (author), Correia, Jose A.F. (author), Berto, Filippo (author), Veljkovic, M. (author), Yang, Fei (author)
Strengthening fatigue damage of orthotropic steel decks (OSDs) needs to comprehensively consider the strengthening effect and the dead weight introduced during the strengthening process, especially for OSDs in super large-span bridges or old renovated bridges, where the dead weight cannot be significantly increased during repair and...
journal article 2023
document
Bai, Wei (author), Xu, X. (author), Liu, Yaolan (author), Liang, Yunxiao (author), Shen, Yijie (author), Han, Zhenyu (author), Sheng, Zhendong (author), Chen, Rong (author), Zhu, Minhao (author)
Systematic experimental investigations were conducted to study the microstructures and impact toughness of each heat affected zone (HAZ) formed during rail flash-butt welding. A high-strength carbide-free bainitic rail steel was subjected to different thermal simulation cycles to separately reproduce each HAZ subzone by tailoring the peak...
journal article 2023
document
Li, Jiayu (author), Xu, Yunbo (author), Jing, Yi (author), Gao, Yijing (author), Liu, Hongliang (author), Yu, Yongmei (author), Banis, Alexandros (author), Kestens, L.A.I. (author), Petrov, R.H. (author)
The phase transformations, microstructure and properties of two Medium-Mn processed via quenching and partitioning steels were compared in this contribution and a new strategy for controlling mechanical properties by introducing and controlling cold-worked ferrite prior to heat treatment is proposed. It was found that during heating, the...
journal article 2023
document
Anupam, K. (author), Liu, X. (author), Scarpas, Athanasios (author), Apostolidis, P. (author), Erkens, S. (author), van Aggelen, M. (author)
Membranes of sufficient bonding characteristics could improve the integrity of the multi-layer structures on orthotropic steel deck bridges (OSBDs), enhancing thus the structural response of these systems and, ultimately, their service life. In this research, full-scale experiments were performed at the LINTRACK accelerated pavement testing...
journal article 2022
document
Niu, D. (author), Zhang, Zhao (author), Meng, Jiandang (author), Yang, Zhengxian (author), Jing, R. (author), Liu, X. (author), Lin, P. (author), Sheng, Yanping (author)
The proper disposal of steel slag has always been a great challenge for the metallurgical industry in China and around the world. In this work, the steel slag aggregate (SSA) was surface pretreated (PSSA) and applied into asphalt mixture. The adhesive behavior between the bitumen and five different types of aggregates (i.e., limestone, diorite,...
journal article 2022
document
Zheng, Yonglai (author), Wen, Yuan (author), Pan, Tanbo (author), Liu, Yongcheng (author), Zhou, Yujue (author), Li, Ruizhi (author), Zhou, Y. (author)
This study investigated the relationship between the acoustic emission (AE) signals parameter sequence fractal characteristics and the damage evolution information of corroded reinforced concrete (RC) beams under four-point bending. Strength deterioration behavior and AE data can be obtained by coupling the four-point bending test and the AE...
journal article 2022
document
Boot, T. (author), Riemslag, A.C. (author), Reinton, T.E. (author), Liu, P. (author), Walters, C.L. (author), Popovich, V. (author)
This work discusses the design and demonstration of an in-situ test setup for testing pipeline steels in a high pressure gaseous hydrogen (H2) environment. A miniature hollow pipe-like tensile specimen was designed that acts as the gas containment volume during the test. Specific areas of the specimen can be forced to fracture by selective...
journal article 2021
document
Boot, T. (author), Riemslag, A.C. (author), Reinton, T.E. (author), Liu, Ping (author), Walters, C.L. (author), Popovich, V. (author)
With fossil fuels being phased out and growing global interest in a hydrogen economy, there is demand for re-purposing existing pipelines for transportation of hydrogen gas. However, hydrogen embrittlement (HE) can limit pipeline steel’s performance. In this study, the effect of hydrogen on the mechanical properties of an X60 base metal ...
conference paper 2021
document
Yang, F. (author), Veljkovic, M. (author), Liu, Yuqing (author)
Numerical analyses incorporating appropriate damage models provide an opportunity to predict the strength and deformation capacity of steel structures. This paper presents a practical calibration for the ductile damage model of S355 and high-strength steel S690Q, S700MC, S960Q based on tensile coupon test results. A combined linear and power...
journal article 2020
document
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Zhiping (author)
In this paper, we experimentally studied the external surface crack growth in steel pipes reinforced with Composite System Repaired (CRS). CRS reinforced surface cracked API 5L X65 pipes were tested, containing three initial notch sizes and four reinforcement schemes. During the tests, the crack growth results, as well as the strain on the...
journal article 2020
document
Liu, X. (author), Kasbergen, C. (author), Li, J (author), Scarpas, Athanasios (author)
The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The most important requirement for the application of membrane materials to orthotropic steel deck bridges is that the membrane...
journal article 2020
document
Liu, X. (author), Kasbergen, C. (author), Li, J (author), Scarpas, Athanasios (author), Tzimiris, G. (author)
The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The interfacial properties between the membrane and the layers bonded to it have not been extensively studied in the current...
journal article 2020
document
Liu, X. (author), Wang, Yuanqing (author), Ban, Huiyong (author), Liu, Ming (author), Veljkovic, M. (author), Bijlaard, F.S.K. (author)
Application of longitudinally profiled (LP) steel plate in the flange of flexural members may provide a good solution to optimize their mechanical performance and to improve the efficiency of steel use, whilst existing design codes provide no design guidance or prediction methodology for such advanced beams in terms of flexural behaviour. To...
journal article 2020
document
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Zhiping (author)
In the present paper, we propose an analytical method to calculate the Stress Intensity Factor (SIF) of circumferential surface cracks in steel pipes subjected to bending. In light of pipe geometry and bending load case, the analytical formula is raised by introducing new bending correction factors and new geometry correction factors on the...
journal article 2020
document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Liu, X. (author), Li, J (author), Tzimiris, G. (author), Scarpas, Athanasios (author)
The orthotropic steel deck bridges (OSDBs) in the Netherlands consists mostly of multilayer system: top porous asphalt layer, guss asphalt layer, steel deck and two membrane layers. The five-point bending (5PB) beam test is the standard device in France for characterization of fatigue response of asphalt concrete surfacings used on...
journal article 2019
document
Zhang, Youyou (author), Liu, Yuqing (author), Xin, H. (author), He, Jun (author)
Steel-concrete composite high bridge pier has been applied increasingly in China and around the world. Most applied steel type in the composite piers are H-shaped steel and steel pipe, while seldom research or practice is associated with angle steel. This paper conducted parametric study on the composite column with equal-leg angle steel and...
journal article 2019
document
Wang, Sihao (author), He, Jun (author), Liu, Yuqing (author), Li, Chuanxi (author), Xin, H. (author)
Composite girder with corrugated steel web is one of the promising concrete-steel hybrid structures with superior properties and cost effectiveness widely applied in highway and railway bridges. The connection between concrete slabs and corrugated steel web is an important part of such composite structure. In order to improve pouring quality...
journal article 2018
document
Liu, Quantao (author), Li, Bin (author), Schlangen, E. (author), Sun, Yihan (author), Wu, Shaopeng (author)
In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated. The results showed that adding steel slag and/or steel fibers improves the water stability,...
journal article 2017
Searched for: subject%3A%22steel%22
(1 - 20 of 33)

Pages

List view
Grid view